Filtreau Excellent Combi Drum 30/45 Inline L – Pump Fed

SKU: FS870
GTIN: 7428479767539
Brand

Filter Type

Inline combi drum filter

Installation

Pump fed

Max Flow

35,000 litres/hour (35 m³/h)

Pond Size

70,000 litres

Koi Pond Size

35,000 litres

Screen

120 microns

Built-in UVC

80 W high-output UV-C

Wash Pump

Built in

A long, narrow pump-fed combi with room for moving-bed media and Japanese matting. The 30/45 Inline L handles up to 35,000 litres an hour, combining a 500 mm drum, automatic washing and 80W UV-C.

£4,612.50 (inc VAT)

Optional Extras

Choose the extra equipment you need for your installation. Media and air pumps are selected separately from the filter.

Add our high-quality Japanese matting in uncut 1.2 m Ă— 1 m sheets. Choose one or two sheets and trim them to fit the matting section. Check the media allowance below: larger filters may need more than two sheets.

Filtreau Excellent Combi Drum 30/45 Inline L – Pump Fed

Inline combi filtration for a pond-side pumped installation

The Excellent 30/45 Inline L Pump Fed brings drum and biological filtration into a 700 mm-wide body. At 2,254 mm long and 1,005 mm high, it suits a different space from the short, wide conventional combis or the lower 750 mm Inline models.

It is designed to receive dirty water from a pond circulation pump and return clean water by gravity. The maximum filter flow is 35,000 litres/hour. That limit is specific to the pump-fed version and should be used when planning the pump duty and return pipework.

Cleaning that keeps solids out of the media

The 120-micron screen collects suspended waste. When loading changes the water level, the controller operates the drum motor and internal wash pump. The spray bar cleans the rotating mesh and sends the removed dirt to waste.

Because that mechanical stage is ahead of the media, the biological chambers can concentrate on dissolved fish waste rather than storing coarse debris. The included 80W high-output UV-C provides green-water control alongside the drum and bio stages; none of the three makes the others unnecessary.

Configuring the media sensibly

The optional arrangement lists 200 litres of Hel-X and 4 m² of matting. A suitable external air pump must keep the moving media circulating at the chamber’s operating depth. Four fitted air bars distribute the air, but the supply pump is a separate item.

Our high-quality Japanese matting is supplied in 1.2 Ă— 1 m sheets. One or two sheets are useful for a measured addition; two give 2.4 m² before trimming, not the complete 4 m² arrangement. Keep the panels removable and leave water routes between them. Do not put fixed sheets into the part of the chamber intended for moving media.

Feed the pond conservatively while the biological media establishes and monitor ammonia and nitrite. A large new filter does not become biologically mature on the day it is connected, even if the drum and UV are working immediately.

A return route that suits the filter

Avoid planning the base height without considering where the water will go afterwards. The return must fall to the pond with enough capacity for the installed flow. Long narrow sections, unnecessary bends and high points can cause water to back up in an otherwise correctly sized system.

Compare the 30/40 Low Inline Pump Fed if body height is the limiting factor, or the 50/65 Inline XL Pump Fed for the larger drum and connection layout. The gravity-fed Inline L belongs before the circulation pump instead.

Model data

Filtreau Excellent Combi Drum 30/45 Inline L – Pump Fed — specifications
Installation Pump fed
Maximum water flow 35,000 litres/hour (35 m³/h)
Maximum koi-pond rating 35,000 litres; suitability also depends on feeding, media and system design
Maximum general-pond rating 70,000 litres
Screen aperture 120 microns
Drum (diameter Ă— length) 500 Ă— 400 mm
UV-C 80 W high-output UV-C
Internal drum-cleaning pump Stainless steel; 600 W, 220–230 V; rated pressure 5 bar
Water connections 3 Ă— 110 mm inlets; 2 Ă— 110 mm outlets
Overall dimensions (L Ă— W Ă— H) 2254 Ă— 700 Ă— 1005 mm
Manufacturer model WMC32ILP
Drum drive motor 60 W; 130 Nm torque; 220–230 V
Fitted air diffusers 4 Ă— 50 Ă— 300 mm; external air pump required

Support and maintenance

Support the complete base, keep the waste pipe accessible and leave room to service the UV safely. If using the 30/45 Inline trickle, plan its flow separately from the main drum limit. The Excellent manual covers safe isolation, cleaning and component access; build the surrounding installation so those jobs stay straightforward.

Related equipment and advice

Filtreau Excellent Combi Drum 30/45 Inline L – Pump Fed Reviews

Reviews

There are no reviews yet.

Be the first to review “Filtreau Excellent Combi Drum 30/45 Inline L – Pump Fed”