Find your pond heater

Use pond size as a shortlist, then read the model description for its recommended volume and operating temperatures. A covered pond at 12°C is our winter planning target; supplier volume guides are not a guarantee for every installation. Contact us for help choosing a model for your pond.

Price

Rated heat output

Wi-Fi control

Heating control

Power supply

Air discharge

Brand

Pond Heating for Koi Ponds

Choose controlled warmth for winter or a longer growing season

Heat your pond to extend the feeding and growing season, or maintain a chosen temperature throughout winter. Seasonal heating warms the water earlier in spring and prolongs warmth into autumn; year-round heating gives you greater control over winter conditions. Our range includes air source heat pumps, electric in-line heaters and heat exchangers. Floating ice preventers do a different job: maintaining a local opening in surface ice.

Air source heat pumps collect heat from outdoor air and transfer it into circulating water. Electric in-line heaters generate heat directly and can suit installations where simplicity, available space or the required heating duty makes them appropriate. For either approach, a pond cover, insulation and protected pipework help reduce the heat that must be replaced.

Start with your intended season and target temperature, then compare output, controls, water flow and electrical requirements. For winter planning we use a covered pond at around 12°C as a starting point. The right model still depends on surface area, insulation, exposure and local conditions. Published summer pool volumes and headline kW ratings should not be treated as winter pond capacities.

Browse the individual models below or explore our air source heat pumps. The guide explains single-phase and three-phase supplies, inverter control and the space each airflow arrangement needs.

Find out more about heat pumps

Pond Heating: Choosing the Right System

Covered ponds and a 12°C winter target

If you want to maintain a covered koi pond at around 12°C through winter, choose equipment that can be controlled at that temperature and has enough output for the site’s heat loss. Volume is a useful starting point, but surface area, construction, insulation, exposed filters and pipework, wind and location all matter. Two ponds containing the same number of litres can have very different heating requirements.

For heat pumps, distinguish the water-temperature setting from the outdoor operating limit. A model that operates in sub-zero air may still have a minimum heating setting of 15°C. Check both specifications. Compare heating output under stated conditions: a warm-weather headline rating is not a promise of the same output on a cold winter night.

How to use the pond heating filters

Start with heating type, then narrow the individual models by the features your installation needs. Wi-Fi control makes supported equipment convenient to check and adjust, but it does not increase heating capacity. Check whether your property can support the exact single-phase or three-phase model before ordering. Vertical and horizontal air discharge need different clearances, so match the heater to its proposed outdoor position.

A pond-size filter provides a shortlist rather than a guarantee. A model without a supported pond-volume band may still suit your installation; it needs individual sizing advice. Do not assume an unlisted model is unsuitable, or choose a smaller heater simply because its swimming-pool volume looks generous. Pool ratings and winter koi-pond requirements can use very different temperatures and operating conditions.

How our pond-size shortlists are selected

Numerical bands use an exact-model supplier pond-volume guide where one is available. A model appears in a band only when the complete band falls within its documented maximum. These volumes provide a starting point; they do not guarantee that a particular pond will hold 12°C through every winter. Check the model’s sizing basis, permitted water temperature, cold-weather output and installation requirements before choosing.

Not every model has a published winter pond-volume rating, so some models have no numerical pond-size band. Send us your pond volume, cover and insulation details, location and target temperature for a recommendation. For the Over 30,000 litres filter, also check the individual model’s stated maximum. A larger heat pump is not automatically the best choice for a smaller pond: minimum output, water flow and temperature control still matter.

Winter heating or extending the season?

Warming a pond earlier in spring or maintaining temperatures later into autumn creates a different duty from year-round winter heating. Tell us the months of use, desired water temperature and whether you will cover the pond. Higher targets increase the heat that must be replaced; a model selected for winter holding may not suit every temperature or season.

Plan before a cold spell so there is time to check the electrical supply, pipework, circulation and covers. A heater sized to replace normal heat loss can take considerable time to warm a cold pond, particularly while the weather continues to remove heat. Consider the starting temperature and intended warm-up period as well as the final target. Manage temperature changes gradually around the needs of your fish and system.

Heat pumps and electric in-line heaters

An air source heat pump collects heat from outdoor air and transfers it into circulating water. Its available output and efficiency vary with conditions. It needs outdoor airflow, condensate drainage, correct water circulation and suitable service access. Inverter models vary their output within their operating range; fixed-speed models use a different control approach. Compare the complete specification and intended duty.

Electric in-line heaters provide another approach within the water circuit. Check the element rating, thermostat range, required flow, connections and electrical supply. Installation cost and the available supply are part of the decision, especially for larger heaters. Have the circuit and protection specified by a suitable installer.

Heating output, electricity consumption and COP

Heating output is the heat delivered to the water; electrical input is the power consumed. These are different figures for an air source heat pump. COP expresses their relationship at a stated test condition: a COP of 4 means 4 kW of heat for 1 kW of electrical input at that condition. It does not mean the unit will maintain that efficiency throughout winter. Compare models at the same air and water temperatures and distinguish maximum COP from performance at the load you need.

As a simple illustration, an average electrical draw of 1 kW for 10 hours uses 10 kWh. At an illustrative tariff of 25p per kWh, that costs £2.50. Your actual tariff, weather, insulation, target temperature and operating hours determine the bill. Do not multiply a heat pump’s headline heat output by your tariff as though it were its measured electrical consumption.

Covers, insulation and the wider pond system

A suitable cover and insulation reduce the heat the equipment needs to replace. Consider the exposed water surface, raised walls, filter housings and pipework together. Keep appropriate ventilation and access when designing a cover, and continue checking water quality and aeration. Heating does not replace effective pond filtration or aeration.

Plan circulation and installation before ordering

Check the flow available after allowing for filters, pipe length, bends and fittings. Our pond pump range helps you compare circulation equipment. Match the heater’s required flow to the pump’s delivered flow through the completed circuit, not its maximum output at zero head.

Follow the exact manual for installation order, orientation, bypass arrangements, electrical requirements and clearances. Leave access for isolation, cleaning, drainage and servicing. Keep outdoor air inlets and outlets clear. If equipment will be taken out of service in freezing weather, follow its draining and winterisation instructions. Switching off the electricity does not remove water trapped inside a heat exchanger.

Cooling and ice prevention serve different purposes

Water chillers remove heat where water would otherwise become too warm. Choose them for the actual cooling load and water circuit. Equipment intended only to prevent surface ice is not a substitute for a heater sized to maintain the whole pond at a chosen temperature. Browse pond ice preventers and winter heaters for their intended applications.

Get help choosing a pond heater

Tell us the volume and surface dimensions, location, whether the pond is raised or in-ground, and how its walls, filters and pipework are insulated. Include the cover type, winter and summer targets, months of use, electrical supply and proposed heater position. Circulation flow is also useful. Those details help us compare actual models and identify installation requirements before you buy.

Read our pond heating guide for the wider planning considerations, compare individual air source heat pumps, or contact That Pond Guy for help with your installation.

Single phase or three phase: check your electrical supply

Single phase is the usual supply arrangement in UK homes, typically 230V. Three-phase equipment normally needs a suitable three-phase supply, commonly 400V between phases, as found at some larger or commercial properties. It cannot be connected to an ordinary domestic socket. The supply type does not by itself tell you which heater is more efficient. Check the exact model’s current, protection and connection requirements with your electrician; many single-phase heat pumps also need a dedicated hardwired circuit.

Fixed speed or inverter: how the heater responds

A fixed-speed heat pump runs its compressor at one speed when heating and switches it off when the controller is satisfied. An inverter model can vary compressor speed within its operating range, reducing output as demand falls. This can help it match changing demand, but electricity use still depends on weather, water temperature and heat loss. Compare tested performance and noise figures under the same conditions rather than assuming every inverter is cheaper to run in every installation.

Horizontal or vertical air discharge: plan the space

Horizontal-discharge units blow the cooled air out through the front or side of the cabinet. Vertical-discharge models direct it upwards. Choose the arrangement that suits the available outdoor space, following the model’s required clearances around the inlet and outlet. A vertical outlet needs clear space above it; a horizontal outlet needs room for its discharge to disperse. Neither should be enclosed where the cooled air is drawn straight back into the inlet.

Understanding rated heat output

Compare models using their published maximum heating output under the manufacturer’s stated rating conditions. This is heat delivered to the water, not electricity consumption. Test temperatures differ between ranges, so use headline ratings for an initial shortlist and compare the detailed specifications before buying. Cold-weather output can be lower.

Seasonal heating or heating throughout winter?

Extend spring, summer and autumn

Seasonal heating helps you warm the pond earlier in spring and prolong the warmer period into autumn. The aim is a longer period of suitable conditions for feeding and growth, rather than a promise of a particular growth rate. Temperature, fish condition, stocking, filtration and water quality all influence the result. Make changes gradually and follow an appropriate feeding programme.

If winter heating is not part of your plan, follow the heater manual’s winterisation procedure before freezing conditions arrive. Some installations need the heater isolated and drained. Stopping the heater does not mean switching off essential pond filtration or aeration: plan the pond’s winter operation separately.

Maintain a stable winter temperature

Year-round heating needs a heater that can operate at the expected outdoor temperature and still deliver enough heat to offset losses from the pond and connected equipment. Covers and insulation reduce heat loss, but exposed filters, pipework, wind and surface area still matter. A swimming-pool volume rating at warm air and water temperatures is not a winter koi-pond capacity.

Why heat a koi pond through winter?

Koi are cold-blooded: their body temperature follows the surrounding water. As the pond cools, metabolism, appetite and digestion slow down, and some immune responses become slower too. Heating gives you more control over these seasonal changes and helps maintain a more consistent environment. Its value is about managing the fish’s condition as well as keeping ice off the pond.

Why do we use 12°C as a winter target?

For our covered-pond winter comparisons, 12°C is a moderate target aimed at avoiding the much colder conditions of an unheated winter pond while keeping heating demand below that of a warmer growth-focused regime. Compared with colder water, a milder winter environment can support greater activity and more opportunities for appropriate feeding. Feed according to the fish’s appetite, the food manufacturer’s temperature guidance and the capacity of your filtration, rather than the thermometer alone.

There is an important distinction: 12°C is not an immune-system on/off switch. Carp research shows that antibody responses can still occur in colder water, but may take much longer. Holding 12°C therefore does not mean immunity is fully active or that the fish are protected from disease. It is a husbandry target, not a medical threshold.

The spring “danger window”: why temperature matters for fish health

The concern behind the danger-window advice is real: disease organisms and a fish’s defences do not all respond to warming water at the same rate. Fish coming out of winter may be in poorer condition, while some infections can develop in cool water when parts of the immune response are still slow. That can make the transition into spring a vulnerable period.

However, there is no single temperature band in which every parasite or bacterium becomes active, and no temperature above which they all stop being a problem. Different diseases favour different conditions. Maintaining a chosen temperature helps you manage the environment, but does not replace quarantine, good water quality, observation or diagnosis when fish show signs of illness. Avoid sudden temperature changes, and do not simply turn up the heater as a treatment for an unidentified problem.

Why choose 15°C or above for feeding and growth?

Around 15°C and above, koi generally become more active and able to make better use of feeding than in cold winter water. That makes 15°C a useful starting point for an extended feeding and growing season: heating earlier in spring and maintaining warmth further into autumn gives the fish more time in conditions that support growth.

It is not the optimum temperature for maximum growth. Published common-carp guidance places best growth in warmer water, broadly in the twenties Celsius, with the exact result depending on the fish and their conditions. Think of 15°C as a more active feeding regime rather than a guarantee of rapid growth. Genetics, age, diet, stocking and water quality all affect the outcome.

As feeding increases, so does the load on the filter. Warmer water also holds less dissolved oxygen, while fish and biological filtration need oxygen. Match the feeding programme to aeration and filtration, and monitor ammonia and nitrite as conditions change. Raising temperature without supporting the rest of the pond does not automatically improve fish health or growth.

Match the heater to your chosen temperature

A heater sized to maintain a covered pond at 12°C is not automatically sufficient to hold the same pond at 15°C or a warmer growing temperature. Higher targets increase heat loss and running demand. Check the model’s cold-weather output and heating setpoint range: a controller with a minimum heating setting of 15°C cannot be used as a 12°C heating-only option. Covers, insulation and exposed filters all affect the capacity required.

Compare electrical input as well as heating output

Heating output is the heat delivered to the water; electrical input is the power consumed to produce it. Both depend on operating conditions. Check the exact model’s supply phase, manufacturer-specified circuit protection and installation instructions. A running-current figure below 13A alone does not establish that a standard UK socket is suitable or that a plug is supplied.

Ice prevention is a different job

A floating ice preventer maintains a local opening in the surface; it does not maintain the whole pond at 12°C or 15°C. For this purpose compare the Oase IceFree4Seasons circulation unit with the Oase IceFree Thermo 200. For controlled whole-pond heating, compare our air source heat pumps.