Ubbink 200 mm Square Water Feature Grid Access Insert

SKU: PNW1890
Brand

A removable galvanised steel cover for the pump-access opening on a compatible Ubbink square water feature grid. It measures approximately 200 Ă— 200 mm. Check the opening and support lip on your grid. Order this part to replace the hatch or to add a cover to the separately sold square grid.

£18.99 (inc VAT)

The Ubbink 200 mm square water feature grid access insert covers the cut-out above the pump on a compatible grid. Lift out the small steel panel to clean the intake, remove the pump or reach a hose connection. That keeps servicing manageable after the main grid has been covered with decorative stone or the feature has been positioned. Buy it as a replacement for a missing insert or as the matching accessory to a new Ubbink square grid.

Specifications and compatibility

Ubbink PNW1890 access insert
Specification Detail
Product code PNW1890
Approximate overall size 200 Ă— 200 mm
Material Galvanised steel
Application Compatible Ubbink square water feature grid with a matching supported pump-access opening
Supplied One removable insert

The UK supplier lists this insert alongside the Ubbink square grids in nominal 600, 800 and 1,000 mm sizes. Those dimensions refer to the full grid. The cover measures about 200 mm across. For an older or unidentified grid, compare the size, shape and seating edges of the opening before buying.

Measure the opening where the insert will rest

  1. Measure the existing insert across both directions if you still have it. Measure across the seating points on the grid if the original piece is missing.
  2. Check the shape of the cut-out. Look at the corners, the ledge and which sides will actually support the insert. An opening with a similar clear width can still use a different seat.
  3. Check the route for the hose and cable. Leave enough space to lift the insert without trapping either. Verify that the pump, hose adaptor and any removable screen will pass through the clear opening.

Keep pump maintenance access usable

Fit the insert so it rests securely and can lift clear by hand when the pump is isolated. Use removable decorative stone above the hatch. Set the ornament, plinth and other heavy loads on the supported part of the main grid. Preserve a clear edge to work from and keep the intake free of loose gravel and sediment. During a service, lift the cover, check the pump and reconnect the hose without putting strain on the cable or pinching it under the insert.

Which products come with an insert?

The standalone square grids are sold separately from this panel. The rectangular Quadro kits and round reservoir kits each include a matched insert for their own assembly. For an existing round or rectangular grid, confirm the dimensions and seating of the original hatch before choosing a replacement. Compare the complete range under Water Feature Reservoirs & Pump Vaults.

Frequently asked questions

Can I use it in an opening that measures 200 mm?

Use both the dimensions and the seating arrangement to check fit. The stated size is the approximate overall insert dimension, and the supported opening needs to suit it.

Should I cover the hatch with stone?

Use a finish that lifts away easily. Position the feature’s weight elsewhere on the supported grid so the hatch stays free.

Do I need a separate insert for a complete Ubbink kit?

Both Ubbink reservoir kit ranges include their matched lift-out inserts. Choose PNW1890 for a compatible square grid or a verified replacement fit.

How do I know whether my pump can come out?

Measure the clear opening and the largest part of the pump with its connector fitted. Try lifting it with the surround unfinished, so the cover and hose route can still be repositioned.

Products related to the Ubbink 200 mm Square Water Feature Grid Access Insert

Ubbink 200 mm Square Water Feature Grid Access Insert Reviews

Reviews

There are no reviews yet.

Be the first to review “Ubbink 200 mm Square Water Feature Grid Access Insert”