Oase Eco-Rise 50 Water Feature Stand

SKU: 72937
GTIN: 4010052729374
Brand

Guarantee

2 Years

Dimensions

508mm diameter × 76mm high

Maximum Load

1,300kg

Oase Eco-Rise 50 is a 508mm support ring for reservoir-based water features, with hose and cable routes and a 1,300kg stand load rating. Stand only.

£110.19 (inc VAT)

Oase Eco-Rise 50 Water Feature Stand

A high-capacity support ring for positioning heavy features over a concealed reservoir

The Oase Eco-Rise is a 508mm-diameter support ring designed to make a heavy monolith, sculpture or decorative feature easier to position above an Oase reservoir or Maxima storage field. Its smooth top allows the feature to be slid into final alignment, while the arched openings leave routes for hose and lighting cable without crushing or sharply bending them.

Despite its modest 76mm height, the published load capacity is 1,300kg when installed correctly. That figure assumes a stable base and properly distributed load; it is not permission to balance an irregular stone on a small contact point or place the stand over an unsupported void.

Where Eco-Rise fits in the system

Use it above compatible Oase Water Feature Reservoirs or a correctly designed Maxima block reservoir. The stand supports the feature; it does not replace the reservoir lid, liner protection or structural base.

Choose this 508mm Eco-Rise 50 when the feature has a broad, stable base. For a narrower base and smaller footprint, compare the 305mm Eco-Rise 30. Both stands have the same stated 1,300kg stand load limit; the complete reservoir and foundation must still be checked separately.

Key specifications

  • Diameter: 508mm
  • Height: 76mm
  • Pipe connection: 1½ inches
  • Maximum published load: 1,300kg
  • Arched hose and cable routes
  • Two-year Oase guarantee

Frequently asked questions

Does it include a reservoir?

No. Eco-Rise is the support stand only.

Can I use it under natural stone?

Yes, provided the stone is stable, the load is properly distributed and the complete base structure is suitable.

Does the hose pass through the stand?

The side arches allow hose and cable to pass beneath the supported feature without being pinched.

Before ordering

Check the dimensions and weight of your feature, its contact area and the reservoir’s own load limit. The stand needs a stable, load-bearing base and must not bridge an unsupported void. Plan the hose and cable routes before positioning the feature.

Products related to the Oase Eco-Rise 50 Water Feature Stand

Oase Eco-Rise 50 Water Feature Stand Reviews

Reviews

There are no reviews yet.

Be the first to review “Oase Eco-Rise 50 Water Feature Stand”