Ubbink Quadro Rectangular Water Feature Reservoir

SKU: UBB-QUADRO-RECT-TANK
Size

Quadro 1 – 65 L, Quadro 2 – 90 L, Quadro 3 – 180 L

Brand

A tough black polyethylene reservoir for a hidden fountain, wall spout or drilled stone. Choose Ubbink Quadro 1 (65 L), 2 (90 L) or 3 (180 L). Use the inner dimensions to check pump space and the outer dimensions to plan the recess. This listing is for the tank. Choose the grid, access insert, pump and hose separately or compare the matching kit.

Price range: £39.99 through £114.99 (inc VAT)

Use a Ubbink Quadro rectangular reservoir to conceal the water supply for a decorative fountain, raised bowl or drilled stone. The black polyethylene tank collects water from the feature and gives a separate pump somewhere to sit beneath the finish. Its straight sides are useful when a sump needs to sit close to a wall or run parallel with a deck or paving edge. Choose the tank alone to replace an existing Quadro basin or to build a system around separately selected components.

Measure the outside for the recess and the inside for the pump

Ubbink Quadro reservoir dimensions
Model and tank code Nominal capacity Outer L Ă— W Ă— D Inner L Ă— W Ă— D
Quadro 1
PNW1720
65 L 750 Ă— 400 Ă— 300 mm 720 Ă— 360 Ă— 300 mm
Quadro 2
PNW1730
90 L 790 Ă— 480 Ă— 300 mm 760 Ă— 420 Ă— 300 mm
Quadro 3
PNW1740
180 L 800 Ă— 650 Ă— 380 mm 770 Ă— 620 Ă— 380 mm

The UK supplier’s dimensions are approximate. The inner figures help you allow for the pump body and fittings. The actual bottom profile and rim can reduce clearance at the points you need to use. Offer up the delivered tank before finalising the recess, frame or decorative facing.

Choose the capacity from the working water level

Quadro 1 is the 400 mm-wide tank for narrow spaces. Quadro 2 adds 25 L of nominal capacity at the same listed depth, with 60 mm more internal width on the supplier dimensions. Quadro 3 offers a much wider interior and 80 mm more depth. Compare that extra depth with the base build-up and access height as well as the tank’s capacity.

Account for the water that travels through the hose and collects in the feature while the pump runs. A tank with a nominal 65 L capacity has a smaller usable range once you reserve water over the pump intake and spare room below the rim. Test your intended flow with the feature assembled. Check the lowest level while it runs and the highest level after the pump stops. A larger vessel helps with drawdown. Water that lands outside the catchment still needs a route back to the tank.

Match the top support to the tank

The reservoir has a lip intended to take the grid for its exact Quadro model. Choose the corresponding galvanised Quadro grid when covering the sump. Start with the model or the previous tank or grid code. The grid’s published size and the tank’s inner and outer measurements describe different points on the assembly. Check the real seating surface and access opening before reusing an old grid.

The supplier quotes up to 150 kg for a correctly supported tank with its matching grid. Treat that as a limit for the assembly, including the ornament, wet finish and any water held above the grid. Support surrounding paving and frames independently. Choose the Quadro kit with grid and insert when you need a matched cover and maintenance hatch as well as the tank.

Prepare the base and leave room for servicing

  1. Provide even support under the filled tank. Keep the rim level so returning water collects across the full opening. Follow the product instructions for support around the sides and for backfilling if you recess it.
  2. Set the pump in a part of the tank you can reach after the grid goes in. Try removing the pump with its hose adaptor fitted. A workable sump needs room for the connection and hose bend as well as the pump body.
  3. Run the return hose so it can be checked or replaced. Compare suitable feature pumps using their flow at your actual lift, and match the hose bore to the equipment.
  4. Test for splash, vibration and drain-back before enclosing the rim. Keep the access panel free so leaves or sediment can be removed and the pump can be serviced later.

Frequently asked questions

Does this include the grid?

This listing supplies the reservoir. The matching grid and access hardware are selected separately. The Quadro kit includes the tank, grid and insert together.

Can I replace a tank and keep my existing cover?

Confirm the original Quadro model, the lip where the cover rests and the condition of the grid. Measure the cover before replacing the tank if the original identity is unclear.

Is the outside measurement the amount of space the pump has?

Use the inner dimensions to begin choosing a pump. Check the clear area at the bottom, the hose turn and the space needed to lift the pump out.

Can the tank sit in a raised surround?

The supplier lists above- and below-ground use. Provide a base to carry the full weight of the water and associated structure, and keep the rim accessible.

What other shapes are available?

Compare the round Ubbink tank for a central fountain or browse water feature reservoirs and pump vaults for larger storage systems.

Products related to the Ubbink Quadro Rectangular Water Feature Reservoir

Ubbink Quadro Rectangular Water Feature Reservoir Reviews

Reviews

There are no reviews yet.

Be the first to review “Ubbink Quadro Rectangular Water Feature Reservoir”