Ubbink Quadro Rectangular Water Feature Grid

SKU: UBB-QUADRO-RECT-GRID
Size

Quadro 1 – 720 × 395 mm, Quadro 2 – 785 × 470 mm, Quadro 3 – 730 × 585 mm

Brand

Replace or add the galvanised steel cover on a Ubbink Quadro rectangular reservoir. Choose the grid for Quadro 1, 2 or 3, then check the lip where it seats and the opening you need for pump servicing. Browse the matching tank or kit if you are building a complete system.

Price range: £77.99 through £112.99 (inc VAT)

The Ubbink Quadro rectangular water feature grid sits on the lip of a matching Quadro reservoir. It provides the support below a bubbling stone, urn or other decorative feature and lets returning water pass through to the sump. Choose it to replace a worn cover or to complete a bare Quadro tank. The three grids are shaped for different rim sizes, so start with the reservoir model and check the place where the steel will actually rest.

Match your grid to the reservoir

Rectangular grid and reservoir codes
Grid option Approx. grid size Matching tank
Quadro 1
PNW1920
720 × 395 mm Quadro 1 · PNW1720 · 65 L
Quadro 2
PNW1930
785 × 470 mm Quadro 2 · PNW1730 · 90 L
Quadro 3
PNW1940
730 × 585 mm Quadro 3 · PNW1740 · 180 L

These are the UK supplier’s approximate grid dimensions. The published Quadro 3 grid is wider and shorter than the quoted Quadro 2 grid. Select by the model and check the seating ledge before you cut an opening. The tank’s overall dimensions include parts of the rim and body that the grid does not cover. Choosing by the longest dimension alone can give the wrong match.

Check an existing installation before ordering

  1. Identify the tank. Look for the Quadro number or compare the outside and inside dimensions on the matching tank page. Take the dimensions where the old grid rests.
  2. Measure the support lip. Check length and width at both ends. Look for distortions, worn support points, raised pipework and anything that would stop the new grid sitting flat.
  3. Work out how you will remove the pump. Record the clear opening and the route for the hose. Allow room for the pump body and the outlet elbow, as well as clearance at the finished stone or deck edge.

A grid that rocks or bridges a damaged area needs the support corrected before the feature is placed on it. Dry-fit the steel and test the pump access while the feature is still easy to move.

Support the feature and keep the service opening clear

For a correctly supported Quadro tank with its matching grid, the UK supplier quotes a maximum load of 150 kg. Count everything that the steel will carry, including damp gravel and water retained in a decorative bowl. Spread the supported load as directed and keep the foot of a heavy feature away from the access insert. An uneven ledge or a small contact area can concentrate weight on a small part of the grid. Give paving, steps and seating independent support.

Keep decorative material easy to lift at the hatch. Use a return surface that lets water fall back through the grid, and keep the cable and hose clear of pinch points. A clean-out should involve lifting the access cover and removing the pump, with the feature and surrounding stonework still in place. Check that the grid and the rim are in good condition whenever the pump is serviced.

Which parts should I order together?

This listing is for the rectangular supporting grid. If an existing hatch also needs replacing, check what fits the exact opening before ordering that part. The complete Quadro reservoir kit includes a matched reservoir, grid and access insert. If you are fitting a custom square reservoir supported on a separate frame, see the square grid range and choose it by its own support requirements.

Frequently asked questions

Can a Quadro 2 grid go on a Quadro 3 tank?

Choose the grid for the exact Quadro model. The two rims and grid shapes differ, even if one measurement appears close.

Is the size in the table the tank opening?

The figures describe the grid. Measure the tank’s support ledge and compare it with the replacement grid before installation.

Can I trim the grid to fit?

Order the correct grid for the tank. If a bespoke size is needed, use a support designed for that opening and load.

How do I get to the pump after covering the grid?

Leave the access panel free of fixed paving and heavy stone. Check at dry-fit that the pump and hose fitting can pass through it.

What should I use on a circular Ubbink basin?

Use the round Ubbink grid for that basin’s model. Find the compatible kits and reservoirs in Water Feature Reservoirs & Pump Vaults.

Products related to the Ubbink Quadro Rectangular Water Feature Grid

Ubbink Quadro Rectangular Water Feature Grid Reviews

Reviews

There are no reviews yet.

Be the first to review “Ubbink Quadro Rectangular Water Feature Grid”