Ubbink Round Water Feature Grid

SKU: UBB-ROUND-GRID
Size

60 – Ø600 mm, 90 – Ø900 mm, 112 – Ø1120 mm

Brand

A galvanised steel support grid for Ubbink round reservoir models 60, 90 and 112. Choose by the model of your tank and confirm the rim where the grid will rest. The open grid lets water return to the sump while leaving a route for pump access.

Price range: £84.99 through £260.99 (inc VAT)

Fit a Ubbink round water feature grid to the matching circular reservoir to support a decorative feature above the hidden water store. The galvanised steel gives water a path back into the basin around the ornament. It also lets you keep the pump beneath the finished surface. This listing is useful if you already have the correct Ubbink tank and need a replacement grid or a support to complete the installation.

Match the model before comparing diameters

Round Ubbink grids and their matched tanks
Grid option Supplier’s nominal label Matching tank
60
PNW1820
Ø 600 mm 60 · PNW1620 · 90 L
90
PNW1830
Ø 900 mm 90 · PNW1630 · 150 L
112
PNW1832
Ø 1120 mm 112 · PNW1640 · 275 L

The diameter in the selector is the UK supplier’s approximate grid label. The outside diameter quoted for the round tank is a separate measurement. For example, the model 90 tank is listed at about 880 mm outside while its grid is listed with a nominal Ø 900 mm label. Use the confirmed model pairing for a matched tank. Measure the actual lip and grid on site before building a seat or using these figures as cutting sizes.

Measure the seat on an older or unidentified tank

Lift the existing cover and measure across the ledge where it rests. Take measurements at right angles and check for a rim that has bent or gone out of round. Note any raised connections and check how far the existing cover overlaps its support. The diameter of the excavation or the distance across the widest external rim can give a different answer. If the original tank model is unclear, take a photo of the empty rim and record the measurements before ordering.

Offer up the new grid with the pump and fittings in place. Watch for any part of the grid that does not seat fully or fouls the cable. Turn the opening to face the side you can reach for servicing if the fitted assembly allows it. Confirm the pump can be lifted out before filling or positioning the ornament.

Consider weight and drainage before adding the finish

The UK supplier quotes a 150 kg maximum for a supported round reservoir with its matching grid. Include the ornament, any water held above the grid and the wet pebble or stone covering. Keep the heavy part of the feature on the supported body of the grid and leave the access area clear. The condition and support of the rim matter when fitting a new grid to an older tank. Use independent support for paving and for any structural load beyond the product’s intended application.

A round rim can catch water from all sides of a centrally placed feature. When dressing the grid with stones, leave room for runoff to return through it. Check splash and return at the chosen pump flow before finishing the surround. Keep the surface over the pump opening easy to lift and avoid pinching the cable or hose.

Order the right combination for a new or existing build

This listing supplies the round grid. Check the pump-cover arrangement on the selected model if you are also replacing its access panel. Choose the round Ubbink kit if you need the tank, grid and access insert together, or order the bare round tank for the same model number. For a rectangular Quadro tank use the matching rectangular grid family.

Frequently asked questions

How do I match a 90 litre tank?

Order the grid for model 60 if your tank is the UK 90 L Ubbink model 60. Confirm the model or the tank code PNW1620 first.

Will this cover fit another brand’s tank of the same advertised diameter?

Use the model-matched Ubbink grid for the specified tank. A similar outside diameter gives no assurance that the cover will sit securely on another rim.

Does the Ø label give my excavation size?

Use the tank’s outside dimensions for planning and dry-fit the delivered tank in the build. The grid label describes the cover.

Can I keep using a grid that rocks on its rim?

Check the support lip and correct the seating before loading the grid. Replace damaged parts so the load has a stable support.

Where can I find other styles of water feature reservoir?

Browse Water Feature Reservoirs & Pump Vaults for square, rectangular and modular systems.

Products related to the Ubbink Round Water Feature Grid

Ubbink Round Water Feature Grid Reviews

Reviews

There are no reviews yet.

Be the first to review “Ubbink Round Water Feature Grid”