Ubbink Round Water Feature Reservoir Kit with Grid & Insert

SKU: UBB-ROUND-KIT
Size

60 – 90 L, 90 – 150 L, 112 – 275 L

Brand

Build a round hidden sump beneath a fountain, drilled stone or bubbling urn. Each Ubbink kit includes the round polyethylene reservoir, its matching galvanised grid and a removable pump-access insert. Choose model 60 (90 L), 90 (150 L) or 112 (275 L). Select a pump and hose to suit the feature you plan to run.

Price range: £159.99 through £429.99 (inc VAT)

A round Ubbink water feature reservoir kit provides a sump beneath a bubbling urn, drilled stone or freestanding fountain. The tank holds the circulating water and the matched grid carries the ornament. Water can return all the way around a centrally placed feature while the tank and pump sit below the finished surface. A removable insert keeps the pump within reach after the surround has been dressed with pebbles.

Which round kit suits your space?

Round Ubbink kit sizes and capacities
Model and kit code Nominal capacity Approx. outer diameter Ă— depth
60
PWK1620
90 L Ă˜ 670 Ă— 360 mm
90
PWK1630
150 L Ă˜ 880 Ă— 320 mm
112
PWK1640
275 L Ă˜ 1130 Ă— 350 mm

The model numbers identify the reservoir and grid. Model 60 holds a nominal 90 L and is the narrowest kit. Model 90 holds 150 L and has the shallowest listed tank at 320 mm. Model 112 holds 275 L and has a 1.13 m outside diameter, so allow for the larger circular area and the room needed around it. For a raised bowl, measure the actual splash circle around the lip as well as the outside diameter of the ornament.

Included parts and what to choose separately

The kit supplies a tough polyethylene reservoir, its fitted galvanised steel grid and the lift-out maintenance insert. Select your fountain, pump, hose and fittings separately. The round tank and model-matched round grid are also available individually. Choosing the kit is useful when all three matching parts are needed for a new installation.

Size the visible catchment and the hidden water reserve

Start with the volume outside the tank when the pump is running. Include the hose, the fill level in an urn above the grid, and any returning sheet of water. A decorative bowl that holds several bucketfuls while running can draw down a small reservoir quickly during start-up. Choose a tank with enough usable water to cover the pump after that drawdown. Keep space at the top for the water that returns on shutdown, then allow for normal splash and evaporation.

For a feature exposed to wind, a wider catchment often matters more than a bigger pump. Set the urn or stone so its runoff falls over the covered sump. Check the whole return path at the intended flow. If water repeatedly lands outside the rim, reduce the flow within the pump’s permitted range or revise the catchment before completing the surround.

Plan the pump, load and access together

Use the outlet’s height above the running reservoir level and the resistance of the hose run to choose from the water feature pump range. Keep the pump intake clear of loose stones, and check the pump body plus its hose connections can be lifted through the access opening. Leave slack where it is safe to do so and protect the cable from the grid and the finished edge.

The supplier quotes a 150 kg maximum for the matched kit. Include the weight of the ornament, water held above the grid and all decorative material the grid supports when wet. Position the load on the supported part of the grid, away from the removable insert. A fountain with a small, heavy foot may need independent support even if its overall weight looks modest. Use a firm level base and the supplied installation guidance before applying any load.

Check the installation with water before adding the finish

Seat the grid fully on the rim and set the access cover where you can work from the edge. Fill the reservoir, run the feature and check the intake stays covered after the above-ground part has filled. Switch the pump off and check the highest level as water returns. Finally, make sure decorative stone can be removed over the hatch without moving the feature. Isolate the power before servicing the pump.

Frequently asked questions

Does model 60 mean 60 litres?

The model 60 kit has a nominal 90 L reservoir. Use the model number for replacement parts and the litres in the table for water capacity.

Which model gives me the most water in a shallow space?

The 150 L model 90 is 320 mm deep on the supplier listing. It needs a wider opening than model 60 and you still need room for a supported base.

Can I use the grid for another round tank?

Match the exact Ubbink model and check the seating lip. A similar outside diameter can still leave the grid unsupported.

What if the feature loses water every day?

Run it at the intended flow and check where splash and runoff land. Check water level with the pump running and after shutdown. Keep the pump covered and inspect for leaks before assuming all loss is evaporation.

What should I use beside a straight wall or deck edge?

The rectangular Ubbink Quadro kit is shaped for straight-edged openings. Compare the complete reservoir and pump vault range for installations with a larger hidden water store.

Products related to the Ubbink Round Water Feature Reservoir Kit with Grid & Insert

Ubbink Round Water Feature Reservoir Kit with Grid & Insert Reviews

Reviews

There are no reviews yet.

Be the first to review “Ubbink Round Water Feature Reservoir Kit with Grid & Insert”