Ubbink Round Water Feature Reservoir

SKU: UBB-ROUND-TANK
Size

60 – 90 L, 90 – 150 L, 112 – 275 L

Brand

A round polyethylene sump for a bubbling stone, urn or fountain. Choose Ubbink model 60 (90 L), 90 (150 L) or 112 (275 L). Compare the inside diameter for the pump and the outside diameter for the recess. The reservoir is sold on its own, with the model-matched grid and complete kit available separately.

Price range: £43.99 through £162.99 (inc VAT)

A Ubbink round water feature reservoir stores the circulating water beneath a garden fountain, urn or stone. Fit it below the finish and the water returns from the feature into the sump. A circular footprint works well when water runs evenly around an ornament or when you are replacing a tank in an existing round recess. The black polyethylene vessel is supplied on its own, so you can retain a sound matching grid or select the cover and pump for a new build.

Round reservoir sizes at a glance

Round Ubbink tanks supplied in the UK
Model and tank code Nominal capacity Outer Ă˜ Ă— D Inner Ă˜ Ă— D
60
PNW1620
90 L 670 Ă— 360 mm 640 Ă— 360 mm
90
PNW1630
150 L 880 Ă— 320 mm 850 Ă— 320 mm
112
PNW1640
275 L 1130 Ă— 350 mm 1100 Ă— 350 mm

Outer measurements guide placement and the space around the rim. Inner dimensions guide the pump and pipe layout. Both are approximate. Check the delivered tank where it will sit before the surrounding paving or frame is made.

Choose by footprint, depth and reserve

  • Model 60 suits the narrowest opening. The 90 L tank is 670 mm across outside and is the deepest listed option at 360 mm. Allow for the support beneath it as well as the nominal depth.
  • Model 90 gives a wider footprint and a shallower body. At 880 mm outside diameter and 320 mm deep, the 150 L tank may suit a wider planting bed or a site where vertical space is limited.
  • Model 112 provides the largest reserve. The 275 L tank is 1130 mm across outside. Plan space for carrying it into position and for safe access beside the finished feature.

Capacity is the amount quoted for the tank, while operating reserve is what remains available after the hose and feature have filled. The pump needs a minimum water level, and water needs space to return on shutdown. Check how much water the display holds above the reservoir at running flow. Keep the splash zone inside the catchment and allow for evaporation, especially in wind or full sun.

Build around the matching rim

Select the round galvanised Ubbink grid by reservoir model. The diameter listed for a grid comes from the grid catalogue. Measure the seating lip on the delivered tank for an existing or made-to-measure cover. The supplier quotes a maximum 150 kg when the correct grid is fitted to the tank and the assembly is supported as required. Add the weight of the wet finish and anything supported above the grid. Keep the service opening clear of concentrated loads.

If you are starting without a cover, the round Ubbink reservoir kit includes the tank, fitted grid and removable access insert as a matched set. Choose a water feature and pump separately. Run any hose or cable through a planned opening so replacing the pump will require only lifting the service insert or covering stone.

Set the base, pump and water returns

Install the tank on a level base that supports it evenly when filled. Position the return so water enters the tank across the covered surface. A high rim on one side or a return interrupted by edging can send water away from the reservoir. Check the installation instructions before using this in a raised or recessed surround and support any surrounding paving independently.

Check the clear space for the pump at the bottom of the tank, including its hose outlet and bend. Select the pump from its flow at the required working head and route the pipe to prevent kinks. For compact features the Oase Aquarius Universal Classic range offers models to compare. Run and stop the feature before finishing the surrounding stone, and leave access for routine cleaning.

Frequently asked questions

Is model 90 a 90 litre tank?

Model 90 is the 150 L tank. Model 60 is the 90 L tank. Use the model number to match the grid and the litre figure to compare capacity.

Can an old grid be used with a new tank?

Use it if it is the right model, sits securely on the rim and is in serviceable condition. Check the effective diameter where it sits before final installation.

Will I need a separate liner in the tank?

The preformed reservoir itself holds water. A separate lined return area can be part of a wider design if your feature extends beyond the tank’s catchment.

How much room do I leave for a pump?

Compare the pump’s footprint, side clearance and outlet with the inner diameter. Install it where it can still be lifted through the access opening with the connections fitted.

What if I need a straight edge beside decking?

Choose a rectangular Quadro reservoir for a straight-edged recess. Browse the wider reservoir and pump vault category if the project needs more hidden water volume.

Products related to the Ubbink Round Water Feature Reservoir

Ubbink Round Water Feature Reservoir Reviews

Reviews

There are no reviews yet.

Be the first to review “Ubbink Round Water Feature Reservoir”