Genuine Pontec MultiClear 8000 Replacement Foam Set

Genuine Pontec MultiClear 8000 Replacement Foam Set

Genuine replacement media for MultiClear 8000

This genuine Pontec foam set restores the intended mechanical and biological media arrangement in MultiClear 8000. It is the correct manufacturer part when the original foams have become brittle, torn, permanently compressed or too heavily impregnated to recover through normal rinsing.

Manufacturer part number: 12093
Pack contents: Fine, medium and very-coarse replacement foam/mesh stages
Compatible with: MultiClear 8000

When should pond filter foam be replaced?

Foam should not be replaced merely because it looks stained. Mature media normally discolours and supports useful bacteria. Replace it when its structure is breaking down, it no longer springs back after cleaning, channels have formed through it or flow remains restricted after a careful rinse.

How to change the media without stripping the filter biology

1. Switch off and safely isolate the pump and UVC.
2. Open the filter according to its instructions and note the order of every foam layer.
3. If the old media is still serviceable in part, avoid replacing every biological surface at the same time.
4. Rinse the new foam in pond water if required, refit it in the correct sequence and check seals and clamps.
5. Restart the filter, check for leaks or overflow and monitor ammonia and nitrite while the replacement media matures.

See the compatible Pontec filter range, browse all pond filter spares, or contact us with a photograph of the model plate if you are unsure which set fits.

Frequently asked questions

Is this a genuine Pontec part?

Yes. This listing is for the genuine manufacturer replacement identified by part number 12093.

Should I wash the foam in tap water?

For routine cleaning, pond water is safer for the established biological colony. Avoid detergents. Follow the filter instructions if the new media needs any preparation before use.

Does the pack include the filter, UVC or pump?

No. This is the replacement media set only; the filter system and electrical components are shown separately.