Charles Austen ET500 Twin DSW4 Lake Aeration Kit
| Brand | |
|---|---|
| Air Pump | Charles Austen ET500 |
| Power | 460 W |
| Diffuser Layout | 2 x DSW4 four-disc stations |
| Weighted Airline | 60m total (2 x 30m), 120m total (2 x 60m) |
| Air Flow | 500 L/min |
| Air Pressure | 0.2 bar |
| Water body size | Large lake |
A high-output two-station lake system with two complete DSW4 assemblies and unrestricted full-bore airflow. Includes 2 x DSW4 four-disc diffuser stations, 2 x 30m super-heavy weighted airline lengths, flow control, secure fittings and a choice of airline length. Free sizing check recommended before ordering.
Price range: £1,660.99 through £1,979.99 (inc VAT)
Available on back-order
Charles Austen ET500 Twin DSW4 Lake Aeration Kit
A high-output two-station lake system with two complete DSW4 assemblies and unrestricted full-bore airflow.
This complete system combines a land-mounted linear air pump, self-sinking diffuser stations, weighted airline, flow control and the secure fittings needed for a properly planned large-pond or lake installation. It is best suited to large water bodies needing two powerful circulation zones and more airflow than the ET400 provides.
Why this layout works
- The extra airflow provides more circulation capacity across two large zones.
- The full-bore connection preserves airflow to the two diffuser stations as working depth increases.
- The full-bore manifold connection preserves high flow before it is split and balanced.
What is included
- 1 x Charles Austen ET500 air pump
- 2 x DSW4 four-disc diffuser stations
- 1 x high-flow 2-way valved manifold with approximately 1-inch inlet and 1/2-inch outlets
- 2 x 30m super-heavy weighted airline lengths
- Correctly sized connectors, reducers, stainless steel hose clips and installation guidance
Important: The ET500's 0.20-bar rated pressure point and higher throughput suit deeper, higher-flow installations than the ET100/ET120 range. It is not a substitute for a high-pressure compressor in unusually deep water.
Plan two high-flow stations with the ET500
The Twin layout puts four diffuser discs at each of two positions. It suits a design that needs two concentrated bubble plumes rather than four separate smaller ones. The two-way, high-flow valved manifold has an approximately 1-inch inlet and half-inch outlets. Each branch serves a complete DSW4 station, so allow for the flow resistance of the long airline before choosing the pump or the final diffuser position.
Airline: the 60 m option supplies two 30 m lines; the 120 m option supplies four 30 m reels with the secure joiners needed for two 60 m lines. Measure both routes from the manifold, including the bank, bends and underwater descent.
Compare ET500 and ET400 pump airflow
The UK 50 Hz manufacturer datasheet rates the ET500 at 500 L/min at 0.20 bar and 460 W. The ET400 is rated at 400 L/min at the same pressure. Both ratings are at the same pressure, so extra rated flow does not qualify the ET500 for a specific extra depth. Use the graph to compare airflow at the actual installation’s total backpressure.

Check diffuser capacity and measured flow before settling on the ET500. An even split of the nominal 500 L/min would give 250 L/min per station or 62.5 L/min per disc. That is above the indicative 30–60 L/min range per disc. Have the pump choice and diffuser capacity reviewed if the predicted or measured flow is outside that range. Water depth alone is not a maximum-depth rating; the airline, joiners and diffusers also add resistance.
Choose the airline length
Standard: 2 x 30m super-heavy weighted airline lengths. Choose the extended option for 2 x 60m lines using four 30m reels and secure joiners. The product selector prices the extra weighted airline and any required straight joiners automatically.
The super-heavy airline has a nominal 12.5mm (1/2-inch) internal diameter. Its flexible bore fits securely over the specified 14mm or 1/2-inch barbed outlets. Every connection must be secured with the supplied stainless steel hose clip. For runs outside the listed options, add extra 30m weighted airline or ask us to calculate the most efficient layout.
Installation and safe start-up
- Position the air pump on a firm, dry, ventilated base above the water level, or use a correctly rated non-return arrangement where this is impossible.
- Use an outdoor electrical supply protected by a 30mA RCD and keep electrical connections out of the water.
- Keep manifold and trunk connections full-bore; avoid unnecessary reductions that create back pressure.
- Place diffuser stations level and use the valves to balance visible bubble output. Never lift a diffuser by its airline.
- In an older, stagnant or strongly stratified pond or lake, introduce bottom aeration gradually. Rapidly mixing poor-quality deep water through the whole water column can temporarily reduce oxygen and stress fish.
- Clean diffuser membranes and inspect airline, clips and pump filters regularly. Service the pump with the correct diaphragm and filter kit.
Compare the complete aeration kit range
See the Large Pond & Lake Aeration Kits guide, or compare another layout:
- ET100 Twin-Zone – 2 x DSW1 single-disc diffuser stations
- ET120 Twin-Zone – 2 x DSW1 single-disc diffuser stations
- ET200 Central DSW4 – 1 x DSW4 four-disc diffuser station
- ET200 Twin DSW2 – 2 x DSW2 twin-disc diffuser stations
- ET200 Four-Zone DSW1 – 4 x DSW1 single-disc diffuser stations
- ET250 Central DSW4 – 1 x DSW4 four-disc diffuser station
- ET400 Twin DSW4 – 2 x DSW4 four-disc diffuser stations
- ET400 Four DSW2 – 4 x DSW2 twin-disc diffuser stations
- ET500 Four DSW2 – 4 x DSW2 twin-disc diffuser stations
Free suitability check before you order
Send us the pond’s length and width, average and maximum depth, approximate volume, fish type and stocking level, distance from the pump to each diffuser position, and whether the main goal is fish oxygen support, circulation, de-stratification or emergency aeration. We will check the pump, diffuser count and airline layout before dispatch.
Individual components and related aeration ranges
Use these links to inspect the main components separately, order additional airline or compare a different aeration layout. The parts supplied with this kit remain the matched specification shown in the included-parts list above.
- Charles Austen ET500 Pond Air Pump – pump specification, output and servicing information
- Charles Austen DSW4 Diffuser Station – 2 included in this layout
- Air manifolds and flow-control options – this kit uses the larger-bore hardware stated in its included-parts list
- Super Heavy Duty Weighted Airline – 30m – spare or additional underwater airline
- Compare all Large Pond and Lake Aeration Kits – side-by-side sizing and layout guidance
- Browse Lake Aerators and Diffuser Systems – compare bottom-diffused and surface-aeration approaches
Compare ETD aeration kits for shallower installations
The ETD range provides additional pump and diffuser combinations where lower operating pressure suits the pond. Compare the diffuser positions and included airline lengths, then check the depth and route against the pump performance.
- ETD200 Central DSW4 Pond Aeration Kit
- ETD200 Twin DSW2 Pond and Lake Aeration Kit
- ETD200 Four Zone DSW1 Pond Aeration Kit
- ETD150 Three Zone DSW1 Pond Aeration Kit
- ETD150 DSW2 and DSW1 Pond Aeration Kit
The ETD200 is rated at 200 litres per minute at 0.15 bar. The ETD150 kits share the available airflow between three diffuser heads, either across three DSW1 stations or a DSW2 and a DSW1. Compare all large pond and lake aeration kits for the full choice of layouts.



Reviews
There are no reviews yet.