Charles Austen ET400 Twin DSW4 Lake Aeration Kit
| Brand | |
|---|---|
| Air Pump | Charles Austen ET400 |
| Power | 347 W |
| Diffuser Layout | 2 x DSW4 four-disc stations |
| Weighted Airline | 60m total (2 x 30m), 120m total (2 x 60m) |
| Air Flow | 400 L/min |
| Air Pressure | 0.2 bar |
| Water body size | Large lake |
A high-flow two-station system that splits the ET400 evenly across two complete DSW4 assemblies. Includes 2 x DSW4 four-disc diffuser stations, 2 x 30m super-heavy weighted airline lengths, flow control, secure fittings and a choice of airline length. Free sizing check recommended before ordering.
ETD400 option: enquiry only. If you’re considering the ETD400 for this Twin DSW4 layout, send us the diffuser depths and both airline routes. We’ll check pump suitability, fittings and availability before quoting. The online ordering choices on this page still supply the ET400. The airflow chart compares ET400 and ET500 only.
Price range: £1,478.99 through £1,797.99 (inc VAT)
Charles Austen ET400 Twin DSW4 Lake Aeration Kit
A high-flow two-station system that splits the ET400 evenly across two complete DSW4 assemblies.
This complete system combines a land-mounted linear air pump, self-sinking diffuser stations, weighted airline, flow control and the secure fittings needed for a properly planned large-pond or lake installation. It is best suited to larger regular-shaped ponds and lakes needing two substantial circulation zones.
Why this layout works
- Each DSW4 receives a nominal 200 L/min, or approximately 50 L/min per disc.
- Two widely spaced stations improve circulation across a larger footprint.
- The high-flow manifold avoids choking the ET400 through the smaller 18mm manifold used on lower-output pumps.
What is included
- 1 x Charles Austen ET400 air pump
- 2 x DSW4 four-disc diffuser stations
- 1 x high-flow 2-way valved manifold with approximately 1-inch inlet and 1/2-inch outlets
- 2 x 30m super-heavy weighted airline lengths
- Correctly sized connectors, reducers, stainless steel hose clips and installation guidance
Two higher-flow aeration stations with the ET400
Choose the Twin DSW4 layout when there are two main areas to aerate. The ET400 feeds two DSW4 stations, each with four diffuser discs on one airline branch. This concentrates the bubbles in two positions rather than putting a smaller station in each of four zones. The two-way, high-flow valved manifold has an approximately 1-inch inlet and half-inch outlets. Route and balance both branches so that the shallower station does not draw most of the air.
Airline: the 60 m option supplies two 30 m lines; the 120 m option supplies four 30 m reels with the secure joiners needed for two 60 m lines. These totals describe the combined airline, not the length of each branch. Measure from the manifold to each station along the planned route.
ET400 and ET500 airflow compared
The UK 50 Hz manufacturer datasheet rates the ET400 at 400 L/min at 0.20 bar. The ET500 is rated at 500 L/min at the same pressure and 460 W. An even split of 400 L/min across eight discs is 50 L/min per disc, or 200 L/min per four-disc station. That is a planning comparison, not the amount this installed kit is guaranteed to deliver.

Water-depth equivalents are not recommended maximum depths. One metre of fresh water adds about 0.10 bar of pressure; two metres add about 0.20 bar. The airline, joiners, manifold and diffuser membranes add resistance. Compare airflow at the total backpressure, then measure and balance flow to both stations when commissioning.
Choose the airline length
Standard: 2 x 30m super-heavy weighted airline lengths. Choose the extended option for 2 x 60m lines using four 30m reels and secure joiners. The product selector prices the extra weighted airline and any required straight joiners automatically.
The super-heavy airline has a nominal 12.5mm (1/2-inch) internal diameter. Its flexible bore fits securely over the specified 14mm or 1/2-inch barbed outlets. Every connection must be secured with the supplied stainless steel hose clip. For runs outside the listed options, add extra 30m weighted airline or ask us to calculate the most efficient layout.
Installation and safe start-up
- Position the air pump on a firm, dry, ventilated base above the water level, or use a correctly rated non-return arrangement where this is impossible.
- Use an outdoor electrical supply protected by a 30mA RCD and keep electrical connections out of the water.
- Keep manifold and trunk connections full-bore; avoid unnecessary reductions that create back pressure.
- Place diffuser stations level and use the valves to balance visible bubble output. Never lift a diffuser by its airline.
- In an older, stagnant or strongly stratified pond or lake, introduce bottom aeration gradually. Rapidly mixing poor-quality deep water through the whole water column can temporarily reduce oxygen and stress fish.
- Clean diffuser membranes and inspect airline, clips and pump filters regularly. Service the pump with the correct diaphragm and filter kit.
Compare the complete aeration kit range
See the Large Pond & Lake Aeration Kits guide, or compare another layout:
- ET100 Twin-Zone – 2 x DSW1 single-disc diffuser stations
- ET120 Twin-Zone – 2 x DSW1 single-disc diffuser stations
- ET200 Central DSW4 – 1 x DSW4 four-disc diffuser station
- ET200 Twin DSW2 – 2 x DSW2 twin-disc diffuser stations
- ET200 Four-Zone DSW1 – 4 x DSW1 single-disc diffuser stations
- ET250 Central DSW4 – 1 x DSW4 four-disc diffuser station
- ET400 Four DSW2 – 4 x DSW2 twin-disc diffuser stations
- ET500 Twin DSW4 – 2 x DSW4 four-disc diffuser stations
- ET500 Four DSW2 – 4 x DSW2 twin-disc diffuser stations
Free suitability check before you order
Send us the pond’s length and width, average and maximum depth, approximate volume, fish type and stocking level, distance from the pump to each diffuser position, and whether the main goal is fish oxygen support, circulation, de-stratification or emergency aeration. We will check the pump, diffuser count and airline layout before dispatch.
Individual components and related aeration ranges
Use these links to inspect the main components separately, order additional airline or compare a different aeration layout. The parts supplied with this kit remain the matched specification shown in the included-parts list above.
- Charles Austen ET400 Pond Air Pump – pump specification, output and servicing information
- Charles Austen DSW4 Diffuser Station – 2 included in this layout
- Air manifolds and flow-control options – this kit uses the larger-bore hardware stated in its included-parts list
- Super Heavy Duty Weighted Airline – 30m – spare or additional underwater airline
- Compare all Large Pond and Lake Aeration Kits – side-by-side sizing and layout guidance
- Browse Lake Aerators and Diffuser Systems – compare bottom-diffused and surface-aeration approaches
Compare ETD aeration kits for shallower installations
The ETD range provides additional pump and diffuser combinations where lower operating pressure suits the pond. Compare the diffuser positions and included airline lengths, then check the depth and route against the pump performance.
- ETD200 Central DSW4 Pond Aeration Kit
- ETD200 Twin DSW2 Pond and Lake Aeration Kit
- ETD200 Four Zone DSW1 Pond Aeration Kit
- ETD150 Three Zone DSW1 Pond Aeration Kit
- ETD150 DSW2 and DSW1 Pond Aeration Kit
The ETD200 is rated at 200 litres per minute at 0.15 bar. The ETD150 kits share the available airflow between three diffuser heads, either across three DSW1 stations or a DSW2 and a DSW1. Compare all large pond and lake aeration kits for the full choice of layouts.



Reviews
There are no reviews yet.