Pond One ClariTec 3000 & 5000 Pressure Filters with 9W UVC

SKU: TPG-PONDONE-CLARITEC-9W
Brand

Filter type

Pressure filter

UVC wattage

9W

Electrical cable length

10m

Plug included

No

Model

3000, 5000

Installation

Pump fed

Pond pump supplied

No

UVC supplied

Yes

Pond One ClariTec pressure filters with a 9W UVC, included sponges and biological media, and backwash cleaning. Choose 3000 or 5000 using the stocking and sunlight guide. Pump required separately; 10m cable with no plug supplied.

Price range: £146.66 through £173.25 (inc VAT)

Pond One ClariTec 3000 and 5000 pressure filters with 9W UVC

The ClariTec brings filter media and a UV clarifier together in a compact pressure-filter body. These two options suit smaller garden ponds, with different capacities and media quantities. Choose the filter for the conditions in your pond, rather than choosing the largest number printed in the model name. Both options have a 9W UVC, a separate ballast and a backwash cleaning function. A pond pump is required separately.

Which ClariTec size should you choose?

Model Light stocking, shaded pond Average stocking, partial shade Heavy stocking and sunlight
ClariTec 3000 Up to 3,000 litres Up to 1,500 litres Up to 750 litres
ClariTec 5000 Up to 5,000 litres Up to 2,500 litres Up to 1,250 litres

Start with the column that best describes your own pond. A sunny pond with larger fish should not be sized using the light-stocked, shaded maximum. Write down the pond volume, fish numbers and approximate fish sizes before comparing filters. If your circumstances sit between two descriptions, compare the more demanding case first. Allow room for fish to grow instead of treating today’s light stocking as a permanent condition.

For a roughly rectangular pond, length multiplied by width multiplied by average depth in metres gives cubic metres; multiply that by 1,000 for litres. Use average depth, rather than the deepest point, and allow for shelves. An irregular pond needs a more careful volume estimate. If an estimate is uncertain, resolve that before buying a filter, as an inaccurate volume affects both equipment selection and subsequent treatment measurements.

Technical specifications and included media

Specification ClariTec 3000 ClariTec 5000
Manufacturer reference 93044 93046
UVC lamp rating 9W 9W
Body height 350mm 460mm
Body diameter 390mm 390mm
Electrical cable 10m; no plug supplied 10m; no plug supplied
Filter sponges One yellow 25ppi, one green 20ppi and one black 15ppi One yellow 25ppi, two green 20ppi and two black 15ppi
Biological media Bio chamber with media Bio chamber with media
Pump Required separately Required separately

The 9W figure identifies the UVC lamp, rather than the running cost of the complete pond system. Your pump has its own electrical consumption. When planning equipment, compare the pump’s input power separately and include any other continuously operated pond equipment in your running-cost calculation.

Plan the pump, hose and return together

Think of the pump, filter and return as one route. Measure the hose run and the height difference between the pump and the return before choosing the pump. A pump’s headline flow figure alone does not tell you the flow that will reach your filter through a real installation. Read its flow curve and compare the operating point with the filter instructions supplied for your exact model. This is especially important when a filter is being fitted to an existing pump.

Make a separate list of the hose, clips and connections that the installation needs. Check the actual supplied inlet and outlet fittings before ordering adaptors. Nominal hose sizes and threaded connection sizes are different measurements; a fitting that looks approximately right in a photograph is not a reliable match. Keep the route accessible so that connections can be checked and the filter can be removed for maintenance.

If you would prefer to compare packaged equipment, browse our Pontec PondoPress complete pressure-filter sets. For another filter design, see the Sicce Green Reset 25. Compare the relevant stocking limits and what is included, rather than comparing the model numbers alone.

Positioning and electrical planning

Allow working space around the lid, fittings and cleaning controls. The 5000 body is taller than the 3000, so check the available height as well as the ground space. A concealed position still needs practical service access. Leave enough room to disconnect the hose without forcing a fitting or disturbing adjacent equipment.

Both models are listed with a 10m cable and no fitted plug. Plan a suitable protected outdoor electrical connection and keep the ballast and connections positioned in accordance with the manufacturer’s instructions. Arrange competent electrical help where needed. Do not assume that a filter can be connected safely simply because its cable reaches an indoor socket.

Cleaning without overlooking the filter media

The backwash function is a useful part of routine cleaning. Plan where the dirty water will go before using it, and make sure the discharge route cannot return that dirt straight to the pond. Follow the model’s own instructions for the control sequence. A general description of a pressure filter is not a substitute for those instructions, as cleaning arrangements differ between ranges.

During maintenance, inspect the sponges rather than replacing them purely because they have become discoloured. Check their shape, condition and fit within the filter. Keep the correct sequence and quantity for your model. Our Pond One ClariTec replacement filter sponges page gives the available spare references and listed model compatibility; choose the specified part rather than a sponge with a similar colour.

UVC servicing and choosing replacement parts

Record the filter model and lamp reference when the equipment is installed. That small record makes later servicing much easier, particularly if the outer box is no longer available. Compare a replacement lamp’s fitting and reference as well as its wattage. You can browse our pond UV bulb range, then check the exact lamp required by the ClariTec instructions before ordering.

Always isolate the electrical equipment before opening it for servicing. Handle glass components carefully and inspect seals and connections before returning the filter to use. If a part appears damaged or a seal no longer sits correctly, address that rather than tightening the lid further. Keep your installation and maintenance records with the instructions so that future checks use the correct model information.

Pond One ClariTec 3000 & 5000 Pressure Filters with 9W UVC Reviews

Reviews

There are no reviews yet.

Be the first to review “Pond One ClariTec 3000 & 5000 Pressure Filters with 9W UVC”