In-Lite HYVE 60mm Honeycomb 12V Recessed Light

In-Lite HYVE 60mm Honeycomb 12V Recessed Light

HYVE is the larger 60mm honeycomb ground light, designed to add a warm decorative point to paths, terraces, steps and driveway edges. The structured lens gives a more distinctive light image than a plain frosted marker.

The stainless-steel 68mm bezel creates a durable finished edge and coordinates with contemporary paving and other In-Lite recessed lights.

Where this light works best

Use repeated fittings at route changes or along an edge, checking the effect after dark before drilling the complete run.

Set out the complete run after dark before drilling every finished surface. Consistent spacing looks formal; deliberately mixed spacing and sizes creates a softer, more natural constellation.

Choose the right recessed effect

Choose HYVE for honeycomb texture, FUSION for a softer frosted point, or DOT for a clearer direct marker and SMART HUB-300 compatibility.

Compare the complete In-Lite recessed-light range before deciding, because visible diameter, lens treatment and beam direction change the result as much as lumen output.

Installation planning

Drill the opening straight and to the current In-Lite template for this exact fitting. Use a suitable wood bit for timber or a cooled diamond drill for stone, protect the cable from sharp edges and provide drainage so water cannot remain around the body.

The supplied EASY-LOCK connects to genuine In-Lite system cable. In soil, gravel or loose aggregate, choose the specified In-Lite mounting accessory instead of burying an unsupported fitting.

Verified technical information

• Colour temperature: 3000K warm white
• CRI: 95
• VA load: 0.8VA
• Beam angle: 74°
• IP rating: IP67
• Visible bezel diameter: 68mm
• 5-year manufacturer guarantee

What is supplied

• One complete In-Lite recessed fitting in the selected configuration
• Fixture cable
• One EASY-LOCK system-cable connector
• Manufacturer installation guidance

Plan the circuit as one system

Add the stated VA load for every fitting when sizing the In-Lite transformer. Total VA rather than wattage, map every branch and leave sensible spare capacity. Contact us with a sketch if you would like help checking spacing, cut-outs, cable routing or transformer load.