In-Lite PLATE 75 Recessed-Light Accessory

In-Lite PLATE 75 Recessed-Light Accessory

PLATE 75 Recessed-Light Accessory is a 75mm square stainless-steel cover for a compatible In-Lite recessed fitting. It is a genuine mechanical accessory and does not include an LED light or transformer.

Where this component is useful

Use it only with the compatible In-Lite fitting specified in the current manufacturer guidance. The part can change how a light is presented or mounted, but it does not change the electrical load, colour temperature or cable requirements of the light module.

Check compatibility before ordering

Recessed-light accessories can look similar while using different diameters, fixing details and product generations. Match the name and manufacturer part number, not just the appearance.

What is supplied

• One genuine PLATE 75 Recessed-Light Accessory
• Manufacturer fitting guidance where supplied

What is not supplied

• LED light module
• Transformer or 12V system cable
• EASY-LOCK unless stated by In-Lite

Complete the project

Browse In-Lite recessed lights or contact us with the intended lamp module so we can check the combination.

‘

Plan for access and future maintenance

Before final fixing, test the complete light and connection and make sure the accessory can still be reached without damaging paving, planting or the finished surface. Original In-Lite components are designed as a system, but lamps, connections and mechanical parts must remain replaceable. Photographing the cable and fitting position before covering the surrounding area can save considerable investigation later.

Do not use this mechanical accessory to compensate for the wrong cut-out, an unstable substrate or a fitting outside its stated application. If the installation detail differs from the In-Lite manual, pause and confirm the correct combination before modifying either component.

‘

Set out recessed lighting before the surface is finished

For In-Lite PLATE 75 Recessed-Light Accessory, confirm the cut-out, recess depth, drainage and material thickness from the current installation drawing before drilling. Recessed lights are most convincing when their spacing follows the paving, step or deck geometry and the source is not directly in the normal line of sight.

Dry-lay the fittings and cable route first, then test the effect after dark. Do not bury an EASY-LOCK or other serviceable connection where it cannot be reached without lifting a finished surface.

Compatible and related In-Lite products

For the same project, compare In-Lite CBL Two-Wire Garden Lighting System Cable, In-Lite CBL-EXT CORD Garden Light Extension Cable, In-Lite HUB-75 UK 12V Garden Lighting Transformer, and In-Lite EASY-LOCK Fixture-to-System Cable Connector. These direct links make it easier to check the precise size, load, finish and connection of each item rather than relying on a similar-looking photograph or family name. If this is a replacement, compare the label and existing connection before assuming that two parts from the same family are interchangeable.

Related products

Compare these closely related products from the same range or category:

• In-Lite SPIKE 60 Recessed-Light Accessory
• In-Lite DB-LED 22mm Trimless Recessed Light
• In-Lite FUSION 60mm Diffuse 12V Recessed Light