Blagdon MiniPond Genuine Replacement Impellers

Blagdon MiniPond Genuine Replacement Impellers

Model-specific pump rotors for MiniPond 900 and MiniPond 2000

These genuine Blagdon impellers restore the rotating assembly in compatible MiniPond pumps. Choose from the official Blagdon manufacturer number rather than the pump’s approximate appearance; MiniPond ranges have changed over time.

When an impeller is the right repair

Typical symptoms include rattling, intermittent starting, visible blade damage or wear on the shaft/bearing surfaces. First clear weed, grit and scale from the chamber and check the fountain or hose is not blocked. If the sealed motor body or cable is damaged, the complete pump should be replaced.

Electrically isolate the pump, remove it to a clean work area and never pull it out by the cable. Keep every O-ring and washer in the original order, rinse the chamber without detergent, seat the new rotor gently and confirm the cover locks fully before returning the pump to water.

Compare our fountain pumps, pond pumps and other genuine pond spares.

Before ordering

Before ordering, match the exact manufacturer reference, model generation and connection or component size against the equipment already installed. Parts that look similar can use different threads, seals, electrical connections or dimensions. Check the product specification and the label on the original unit, and allow safe access for isolation and future servicing when the part is fitted. Inspect associated seals and fasteners during the repair and replace any worn items before recommissioning.