In-Lite HUB PROTECTOR Weather Cover for HUB-50 & HUB-100

In-Lite HUB PROTECTOR Weather Cover for HUB-50 & HUB-100

A durable protective cover made specifically for legacy In-Lite HUB-50 and HUB-100 transformers installed where full overhead shelter is unavailable

The In-Lite HUB PROTECTOR is a durable moulded cover shaped specifically for the legacy HUB-50 and HUB-100 transformer housings. It provides an additional barrier against precipitation when a completely covered installation position is not available.

Use the protector that matches the transformer

This original model is for HUB-50 and HUB-100. It is not the cover for the newer HUB-75, SMART HUB-75, SMART HUB-150 or SMART HUB-300. Those transformers use their corresponding PROTECTOR model, so check the transformer label before ordering.

Installation still matters

A protector does not remove the need to follow the HUB installation instructions. Mount the transformer vertically, at the specified clearance above ground, with safe access to its controls and cable connections. The cover slides over an already mounted HUB; approximately 3mm clearance can be created by loosening the mounting screws by two turns before fitting it.

Key information

• For legacy In-Lite HUB-50 and HUB-100
• High-quality durable plastic
• Additional protection from precipitation
• Approximate dimensions: 237 × 135 × 74mm
• Manufacturer article number: 10500711
• EAN: 8717051004841

Need a different model? Compare all In-Lite transformer covers and controls or contact us with the HUB model number.

Matching transformers

This protector is sized for the named HUB models. It is not interchangeable with the other protector sizes.

In-Lite HUB-50 12V Garden Lighting Transformer · In-Lite HUB-100 12V Garden Lighting Transformer