In-Lite FLUX 22 with RING 28 SHIELD 12V Recessed Uplight
| Finish | Stainless Steel, Black, Pearl Grey |
|---|---|
| Brand | |
| IP Rating | IP67 |
| Colour Temperature | 3000K |
| VA Load | 2 VA |
| Power Source | 12V Transformer, 21V Transformer |
| Light Output | 76 lm |
| CRI | 90 |
| Product form | Complete light fitting |
| Light Type | Recessed Light |
| Guarantee | 5 Years |
A compact 3000K uplight with a 49° beam, 76 lumen output and 2VA load. Choose stainless steel, black or pearl grey, with the matching shield ring included.
£86.66 (inc VAT)
In-Lite FLUX 22 with RING 28 SHIELD 12V Recessed Uplight
Focused lighting from a discreet 22mm body
Product photograph shows the black finish. Select the required finish below.
The RING 28 SHIELD version adds directional screening around the compact FLUX 22 uplight. It is useful where the light sits close to a walking route and the view of the source needs controlling. Choose the finish to suit the surrounding surface.
Choose the light effect
A 49° beam and approximately 2.5m reach make FLUX 22 useful for a small architectural detail, feature wall or garden ornament. Its 76 lumen output is quite different from a gentle orientation marker. Aim and test it after dark before fixing the installation position.
Dimensions and installation
The body is approximately 22mm across and 55mm long. Use the exact installation manual for the drilling tolerance and required recess clearance before making a hole in finished stone or timber. Body diameter, drill size and installation depth are separate measurements.
Provide drainage around the fitting and protect the cable from sharp edges. This selected assembly includes its matching ring. Replacement rings must match the threaded add ring module, not an unrelated trimless body.
What else is needed?
Connect with the supplied EASY LOCK to genuine in-lite main cable. Choose an appropriately rated HUB or SMART HUB and count 2VA for each FLUX 22. CBL EXT CORD provides a suitable fixture lead extension where the fitting cannot reach the main cable. A separate transformer and main cable are not included.
Technical information
| Light output | 76 lumens |
|---|---|
| Beam | 49° |
| Approximate reach | 2.5m |
| Colour temperature | 3000K |
| Colour rendering | CRI 90 |
| Power | 1.2W |
| Transformer load | 2VA |
| Protection | IP67 |
| Body | Approximately 22mm diameter × 55mm long |
| Fixture cable | Approximately 0.6m |
| Selected assembly | with RING 28 SHIELD |
Compare before choosing
For a soft marker rather than an uplight, compare FUSION 22 and HYVE 22. For a larger feature, compare FLUX or browse the recessed lighting range.
Compare the three FLUX 22 versions
Choose the standard RING 28 version for an open beam, or the trimless version for a flush finish without a visible ring. This SHIELD assembly is the choice where directional glare control matters.
Choose the right FLUX 22 assembly
Compare FLUX 22 trimless, FLUX 22 with RING 28. The trimless fitting has no visible ring, the standard ring gives an open uplight, and the shield helps screen the source from one side. A separate ring is only suitable for the compatible add ring module, not the trimless body.
Reviews
There are no reviews yet.