Oase ProfiClear Premium-Compact-L Replacement Sieve Set 60 micron

Oase ProfiClear Premium 60 micron replacement sieve set

Oase part 25376 is a set of eight 60 µm drum screens for compatible ProfiClear Premium and Compact-L filters. This listing supplies replacement mechanical sieve elements, not the complete filter, its control unit, an ultraviolet clarifier or an air pump. If the original drum panels are torn, bent or failing to sit properly, a correctly matched replacement set restores the screen stage without changing the rest of a serviceable filter.

The 60-micron grade sits between the finer 30 µm Oase sieve set and the coarser 150 µm set. It is a useful reference point when you are replacing existing 60 µm elements like for like. Changing to a different grade should be a deliberate choice, with the effect on drum-cleaning frequency and downstream solids observed after the change. Screen openings are one part of pond performance; feed rate, stocking, plant debris and the rinse arrangement matter too.

What eight 60-micron screens do

The rotating drum presents these mesh panels to incoming pond water. Material too large to pass the nominal 60 µm openings collects on the screen and is removed during an automatic spray-rinse cycle. The filter sends that concentrated waste down its waste line instead of leaving it in the pond circuit. This is mechanical separation. Dissolved ammonia and nitrite need biological treatment; green suspended algae may need UV clarification and appropriate circulation. A replacement mesh will not perform those jobs by itself.

Sixty microns means sixty thousandths of a millimetre. That measurement describes the approximate screen opening, not a guaranteed pond-water clarity rating. Real particle capture depends on their shape and how they move through the drum. A koi pond with frequent feeding may load its screens very differently from an ornamental pond with low stocking. Looking at what actually reaches the waste tray and what appears downstream is more useful than treating the mesh number as a complete filter specification.

Choose the correct ProfiClear part

Oase’s spare-parts catalogue identifies 25376 as its 60 µm ProfiClear Premium replacement sieve set. Some compatible service references include pump-fed and gravity-fed ProfiClear Premium drum filters and Compact-L units. Oase has also produced other Compact and BioTec drum types with different panels. Do not buy by the words “ProfiClear” alone. Use the model plate, installation manual and original screen-frame reference to identify the size and retaining arrangement. If a retailer describes a single sieve frame under another code, that is not automatically this eight-piece set.

For a ProfiClear Premium Compact-L pump-fed or Compact-L gravity-fed installation, verify the installed generation before replacing all panels. If the model label is obscured, take a photograph of the drum plate, one screen from both sides and the clip arrangement. We can help compare these against the Oase part reference. That step is especially useful when buying spares for a second-hand filter with an unknown service history.

When to stay with 60 microns and when to reconsider

Staying with 60 µm is straightforward if the pond has been running well and you simply need fresh panels. A move to 30 µm may catch smaller suspended particles, but could make the drum rinse more frequently when solids are high. A move to 150 µm may lower cleaning demand and water use in some installations, while allowing more fine waste to continue to later stages. Neither change guarantees a specific saving or level of clarity. Monitor the actual rinse count, water use and downstream media over several days before deciding the new grade is working for your pond.

If the drum has suddenly begun rinsing excessively with the existing 60 µm panels, check for a restricted waste drain, fouled mesh, blocked spray jets, weak rinse pressure, sensor position and changes in feeding or leaf fall before spending money on new screens. Damaged or deformed mesh is a good reason to replace it. A blocked rinse system needs its own maintenance. If the water is cloudy despite clean panels, establish whether the cloudiness is particulate, dissolved colour or green water rather than assuming a screen change will solve it.

Replacing and checking the panels

Follow the safety and service instructions for your particular drum model. Isolate the electrical supply and make the water flow safe to work on. Photograph the orientation of the old panels and how they are held before taking anything apart. Lift each screen out without levering against its mesh. Clean the supporting seats and check seals, clips and other retaining parts. A new panel should fit correctly without bending it or forcing its edge into a damaged holder.

After all eight are seated, restore operation and observe the drum through more than one rotation and rinse cycle. Look for water bypassing a panel edge, uneven rotation, spray nozzles missing mesh, unexpected leaks or waste water overflowing its intended route. Check the waste outlet as well as the pond return. If the drum runs continuously or never rinses when loaded, investigate its sensors and controls using the correct manual; replacement panels alone will not fix an electrical or control fault.

Product details and related options

• Maker: Oase
• Part number: 25376
• Component: ProfiClear Premium replacement sieve set
• Nominal mesh grade: 60 µm
• Quantity: eight elements
• Role: mechanical screening of pond water in a compatible drum
• Complete drum filter and rinse components: not included

If you want help deciding between mesh grades, tell us the exact drum model, existing screen code, pond stocking and approximate rinse frequency. That information lets us discuss a real installation, including where the collected solids go, instead of recommending a different sieve based only on the headline micron figure.