In-Lite SWAY PENDANT Outdoor Hanging Light

In-Lite SWAY PENDANT Outdoor Hanging Light

SWAY PENDANT is a softly glowing outdoor pendant for dining tables, lounges, pergolas and sheltered seating. Its small frosted head spreads a gentle all-round light, while the slim cable keeps the fitting visually light during the day. Several pendants hung at different heights can create a relaxed composition without overpowering the garden.

This page brings the complete single and triple sets together in Black and Pearl Grey, with a clear choice between the In-Lite 12V system and the 100–230V mains-powered version.

Choose the correct power system

• 12V: connects to an In-Lite transformer and CBL system cable through EASY-LOCK. The fitting is compatible with TOUCH DIMMER. Allow 1 VA for each pendant.
• 100–230V mains: does not use an In-Lite HUB. These versions include Human Dimming and must be connected by a suitably qualified electrician. The single and triple kits include the required mains power components.

Single or triple complete kit

The single 12V fitting includes the pendant, EASY-LOCK, strain relief, cable screw and fixing. Triple 12V kits include three pendants and the appropriate mounting/base components; each pendant must be allowed for in the circuit calculation. The complete mains kits include the specified pendant or three-pendant arrangement, base, connection components and power supply hardware.

Each pendant has approximately 2.2m of cable that can be shortened to establish the hanging height. Choose a calm, sheltered position rather than a very exposed roof edge where wind can make suspended fittings move excessively.

Verified shared specification

• Head diameter: approximately 85mm
• Colour temperature: 2900K warm white
• Colour rendering: CRI 96
• Ingress protection: IP55
• Cable length: approximately 2.2m per pendant
• Light effect: soft diffuse all-round glow
• LED service-life indication: 25,000 hours
• 5-year manufacturer guarantee when correctly installed

Control the downward emphasis

Add the SWAY PENDANT CAP where you want to shield the source and direct more of the effect towards the table. It is compatible with both 12V and mains SWAY PENDANT fittings.

Browse all In-Lite wall, ceiling and pendant lights. For 12V versions, plan the transformer and system cable at the same time so the mounting point and connection remain maintainable.