Evolution Aqua EazyPod Complete – Green

Evolution Aqua EazyPod Complete Green

All in One Mechanical, Biological and UV Pond Filtration with Air Pump

The Evolution Aqua EazyPod Complete Green is a fully integrated pond filtration system combining mechanical filtration, biological filtration, an 18W UV clarifier and the Evolution Aqua Airtech 70 kit in one compact unit. Because it includes filtration, UV clarification and aeration as standard, it delivers stable water quality with minimal additional equipment.

Designed for small to medium koi ponds and ornamental ponds up to 10000 litres, the EazyPod Complete Green provides effective mechanical solids capture, biological ammonia conversion and green water control in a compact footprint. As a result, it suits pond keepers who want a complete filtration and aeration system without upgrading to larger multi chamber or drum filters.

The Granite Green finish blends naturally into landscaped gardens while maintaining the same internal performance as the Grey model.

How the Evolution Aqua EazyPod Complete Green Works

First, water enters the outer chamber where heavier debris settles naturally at the base of the unit. This initial stage improves mechanical solids separation before finer filtration begins.

Next, water passes through a stainless steel grill that traps larger particles before entering the central chamber.

Inside the centre chamber, 18 litres of static K1 media provide high surface area biological filtration while also capturing fine suspended solids. Because the media remains static during normal operation, it performs effective mechanical solids capture while supporting beneficial bacteria responsible for ammonia and nitrite breakdown.

As water continues through the system, the built in 18W UV clarifier neutralises suspended algae spores. Consequently, the filter helps prevent green water and supports clearer pond conditions.

Finally, clean filtered water returns to the pond.

When cleaning is required, the Airtech 70 air pump vigorously agitates the K1 media. This air assisted cleaning cycle releases trapped waste, which you can then flush out via the sludge drain.

The EazyPod Complete Green is recommended for pump fed installations, however gravity fed setups are possible when correctly configured.

Key Features

• All in one pond filtration system including mechanical filtration, biological filtration, 18W UV clarifier and Airtech 70 air pump
• 18 litres of static K1 media providing efficient solids capture and high surface area biological filtration
• Built in 18W UV clarifier for green water control
• Continuous aeration improves ammonia and nitrite breakdown
• Recommended for pump fed installation, gravity fed possible
• Adjustable rubber connectors supporting pipework up to 3 inches
• Compact footprint suitable for small to medium pond setups
• Integrated sludge drain for simple maintenance
• Supplied with lid for a clean and discreet installation

Technical information

• Maximum garden pond size: 20000 litres
• Maximum koi pond size: 10000 litres
• Maximum garden pond flow rate: 10000 litres per hour
• Maximum koi pond flow rate: 5000 litres per hour
• K1 media included: 18 litres
• Built in UV clarifier: 18W
• Air pump included: Airtech 70
• Installation type: Pump fed recommended, gravity fed possible
• Colour: Granite Green
• Inlet compatibility: Adjustable rubber connectors up to 3 inches
• Dimensions: Height 585 mm, Diameter 520 mm

Practical setup advice

Before ordering, think about how this product fits into the full pond setup. Compatibility, maintenance access, pipe or hose size and future servicing are often just as important as the headline specification. A product that is technically suitable can still disappoint if it is installed with restricted flow, poor access or the wrong supporting equipment.

Where possible, plan the main product and the accessories together. This makes installation neater, maintenance easier and the final system more reliable over time.

Maintenance and compatibility checks

It is worth checking the supporting parts at the same time as the main product. Hose size, pressure pipe, valves, unions, UV units, filter inlets, air manifolds, spares and cleaning access can all affect how well the final system works. A correctly matched installation usually performs better and is easier to maintain than one built from parts chosen separately.

• Match the pump flow to the filter and pond volume, allowing for head height and pipework losses.
• Keep unions, valves and waste outlets accessible for cleaning and maintenance.
• Use suitable hose, pressure pipe or DN discharge pipework where specified by the manufacturer.
• Check compatible UV bulbs, quartz sleeves, media and spare parts before the pond season starts.

Plan this product as part of the complete filtration layout, rather than as an isolated item. Check the recommended flow rate, inlet and outlet sizes, waste connection, access for cleaning and the space needed for routine servicing before installation. A well matched filter system is easier to maintain and gives more reliable water clarity over the long term.

Filter setup notes

Helpful links and compatible products

Use these links to plan the rest of the system around this product. The right pump, pipework, UV, media or spares will make the installation easier to set up, maintain and service.

• View the full Evolution Aqua range
• Browse the Evolution Aqua EazyPod range
• Compare with Evolution Aqua Nexus filters
• Add Evolution Aqua evoUV clarification
• Choose an Evolution Aqua Airtech air pump

More useful ranges and guides

These related ranges and guides may help you compare options, choose the right accessories and plan the full pond system rather than viewing this product in isolation.

• Browse pond filters
• Browse pond pumps
• Standard flexible pond hose