Angled Vertical Spout Waterfall

Angled Vertical Spout Waterfall

A crisp angled wall spout for a contemporary water feature

Temporary made to order lead time: Due to exceptionally high demand at the Water Blades factory, these stainless steel water blades are currently being made to order. Please allow up to 3 weeks for manufacture and dispatch. This is temporary, and we will always aim to send sooner wherever possible.

The Angled Vertical Spout Waterfall creates a wall-mounted water feature with a shaped stainless steel face. Its rear inlet lets the water supply be concealed behind the wall. Choose the outlet width to suit the setting and leave room for the wider fixing plate, pipe connection and future access.

Made by Water Blades in Sheffield, UK, this stainless steel feature is designed to be incorporated into your own pond or water-feature installation.

Choose the right size and connection

Available outlet sizes on this page: 200, 300, 400mm. Select the exact option above before adding it to your basket.

The rear connection is a 1-inch BSP inlet. A stepped hosetail is supplied for 20, 25 or 32mm flexible pond hose. The supplier’s projection information differs between the general description and some size records, so confirm the front-to-back dimension for your selected model before setting the wall depth.

Plan the installation

Position the blade on a rigid, level support and check the finished wall or coping line before fixing it. Route the supply without tight bends, leave access to the inlet and provide room to remove the fitting later. Connect and test the water flow before permanently enclosing the body.

Leave clearance behind the rear inlet for the hosetail and hose, and keep that connection accessible. For a stand-alone feature, provide a reservoir that catches the full fall and splash area and keeps the pump adequately submerged while running.

Pump selection and water flow

Choose a pump from its flow curve at the working lift, allowing for hose length and bends. A headline maximum litres-per-hour figure is measured under different conditions from most installed features. The vertical lift is measured from the pond or reservoir water surface to the outlet.

Variable flow makes adjustment easier during commissioning. Start gently and increase the flow while checking the full outlet, the landing position and the splash area. Wider outlets and longer pipe routes need particular attention. Send us the selected blade size, lift and pipe route if you need help choosing a pump.

Care and seasonal use

Wipe the stainless steel regularly with a soft cloth and remove deposits before they build up. Avoid chlorine-based cleaners; stainless steel can stain or corrode, particularly with salt exposure. Keep cleaning residues out of the pond. If shutting the feature down for winter, drain and dry the blade and exposed pipework.

Useful checks before ordering

Check the selected size, the fixing space, the pipe connection and the collection area together. Gallery photographs show examples of the range; use the size table and selected option for your order. Pumps, reservoirs and surrounding landscaping shown in installation photographs are not included with the blade.

Size options and product codes

Codes for the options sold on this page

Option	Product code
200mm	AVS200-1
300mm	AVS300-1
400mm	AVS400-1

Explore the stainless steel water-blade range.