Poolex Jetline Premium Fi Heat Pumps
Compare individual models and installation requirements
Compare individual Poolex Jetline Premium Fi inverter heat pumps, including the separate single-phase and three-phase versions. Select the exact electrical model before comparing installation costs or ordering fittings.
Browse the complete air source heat pump range to compare brands and controls, or explore other pond heating equipment.
Compare model output, water flow and supply
The output below is measured at air 15°C and water 26°C. It helps compare models at the same published test condition; it is not a freezing-weather output or a guaranteed winter pond capacity. Open the individual page for the full specification and installation requirements.
On a small screen, swipe the comparison table sideways to see all columns.
| Model | Heat output at A15/W26 | Nominal water flow | Electrical supply |
|---|---|---|---|
| Poolex Jetline Premium Fi 55 Heat Pump with Wi-Fi | 1.33kW to 5.74kW | 2.5m³/h | 230V single phase |
| Poolex Jetline Premium Fi 75 Heat Pump with Wi-Fi | 1.76kW to 7.62kW | 3.5m³/h | 230V single phase |
| Poolex Jetline Premium Fi 95 Heat Pump with Wi-Fi | 2.23kW to 9.73kW | 4.5m³/h | 230V single phase |
| Poolex Jetline Premium Fi 125 Heat Pump with Wi-Fi | 2.87kW to 12.61kW | 5.5m³/h | 230V single phase |
| Poolex Jetline Premium Fi 155 Heat Pump with Wi-Fi | 3.59kW to 15.74kW | 6.5m³/h | 230V single phase |
| Poolex Jetline Premium Fi 155 Three-Phase Heat Pump with Wi-Fi | 3.66kW to 15.96kW | 6.1m³/h | 380 to 415V three phase |
| Poolex Jetline Premium Fi 210 Heat Pump with Wi-Fi | 4.77kW to 20.68kW | 9m³/h | 230V single phase |
| Poolex Jetline Premium Fi 210 Three-Phase Heat Pump with Wi-Fi | 4.79kW to 20.75kW | 9m³/h | 380 to 415V three phase |
Temperature and seasonal suitability
The single-phase Jetline manual specifies a 15–40°C heating setting range; the dedicated 155 Tri and 210 Tri manual specifies 8–40°C. Select the exact electrical version and check its controller range. A 12°C setting alone does not establish winter heating capacity: pond heat loss and cold-weather output must also be assessed.
Compare the complete installation
The family combines inverter operation with Wi-Fi control. Rated heating output and efficiency change with air and water temperatures. Pool-volume figures and warm-weather output must not be treated as guaranteed winter pond performance.
Plan the water circuit using the flow required by the heater after allowing for the installed filter, pipes and fittings. Arrange appropriate isolation and service access, and check the electrical supply with a qualified installer. Outdoor clearance and a clear route for condensate are part of the installation, not optional extras.
Covering and insulating the water reduces heat loss. If a heater is shut down during freezing weather, follow its draining and winterisation instructions; switching off power does not remove trapped water. Our pond heating guide explains the main planning considerations.
Individual model pages
- Jetline Premium 55 Wifi Model
- Jetline Premium 75 Wifi Model
- Jetline Premium 95 Wifi Model
- Jetline Premium 125 Wifi Model
- Jetline Premium 155 Wifi Model
- Jetline Premium 155 Three Phase Wifi Model
- Jetline Premium 210 Wifi Model
- Jetline Premium 210 Three Phase Wifi Model
Related heat pump ranges
Air Source Heat Pumps · Remora Professional · Remora Inverters · AquaForte Mini Heat Pump · Remora Heat Pumps
