Pond Filter Foam Set 5 – Coarse, Medium & Fine

SKU: AQ051
Foam Grades

Coarse / medium / fine

Approximate Size

650 × 440mm

Preparation

Unpunched / cut to size

Three large cut-to-size pond-filter sheets—coarse, medium and fine—approximately 650 × 440mm each.

£43.99 (inc VAT)

Pond Filter Foam Set 5

Replacement coarse, medium and fine mechanical media for an older box-filter installation

This universal cut-to-size set is intended for box filters that accept three large foam sheets. The set restores the staged mechanical layers that trap larger debris first and progressively finer suspended material afterwards. Keeping that order reduces rapid clogging of the fine sheet and preserves more even flow through the filter.

This is a universal replacement set rather than a moulded model-specific cartridge. Older filters may have changed internally during production, so compare the existing foam dimensions, number of layers and any holes or slots before cutting or discarding the old set. Where the sheets are supplied unpunched, use the original foam as a template and cut cleanly so water cannot bypass around ragged gaps.

Dimensions and contents

Compatibility This universal cut-to-size set is intended for box filters that accept three large foam sheets.
Foam size Approximately 650 × 440mm per sheet
Contents One coarse, one medium and one fine sheet
Preparation Check and cut/punch to the original pattern where required

When foam really needs replacing

  • It remains permanently compressed after cleaning.
  • The sheet tears, crumbles or no longer holds its shape.
  • Water channels around enlarged holes or damaged edges.
  • The original grades have been mixed up or are missing.

Routine dirt alone is not a reason to throw mature foam away. Clean a portion at a time and maintain good oxygenated flow. If a newly cleaned filter blocks almost immediately, investigate pump size, algae, fish load and upstream solids rather than simply fitting finer foam.

Browse our full filter spares, pond filters and filter-starting bacteria.

Frequently asked questions

Should I cut holes before fitting?

Only where the original arrangement requires them. Use the old sheet or filter grid as an accurate template.

Which grade goes first?

Water normally meets the coarse layer first, followed by medium and fine. Follow the filter manual if its layout differs.

Can I wash foam under a tap?

For routine biological maintenance, rinse it in removed pond water. Chlorinated tap water can harm established bacteria.

Can I replace just one damaged sheet?

Yes if the other grades remain resilient and correctly shaped, although a matched set is often more convenient on an older filter.

Pond Filter Foam Set 5 – Coarse, Medium & Fine Reviews

Reviews

There are no reviews yet.

Be the first to review “Pond Filter Foam Set 5 – Coarse, Medium & Fine”