Corner Water Blade

Corner Water Blade

A shaped stainless steel waterfall for a pond corner

Temporary made to order lead time: Due to exceptionally high demand at the Water Blades factory, these stainless steel water blades are currently being made to order. Please allow up to 3 weeks for manufacture and dispatch. This is temporary, and we will always aim to send sooner wherever possible.

The Corner Water Blade is shaped for a corner installation, with a bottom water feed that can be routed discreetly beneath the body. It offers an alternative to fitting a straight blade across a wall. Check the two adjoining sides and the position of the front lip against the actual pond corner before choosing a size.

Made by Water Blades in Sheffield, UK, this stainless steel feature is designed to be incorporated into your own pond or water-feature installation.

Choose the right size and connection

Available nominal model sizes on this page: 200, 300, 400, 500, 600mm. Select the exact option above before adding it to your basket.

The supplier’s corner illustration labels the adjoining sides of the example model. Treat the selected nominal size as a model reference and confirm the corner footprint before forming a recess; it is not a verified diagonal opening dimension. The 1¼-inch BSP inlet is underneath the blade.

What is included

The supplier lists the corner blade, a plastic threaded hosetail with O-ring, fixing brackets, stainless steel screws and cup washers. Plan the pump, supply hose and any additional connectors separately.

Position the blade on a rigid, level support and check the finished wall or coping line before fixing it. Route the supply without tight bends, leave access to the inlet and provide room to remove the fitting later. Connect and test the water flow before permanently enclosing the body.

Leave room below the bottom inlet for the hosetail and pipe bend. Check that the corner structure can accommodate the connection without loading the fitting. Provide a pond or reservoir that catches the full fall and splash area.

Pump selection and water flow

Choose a pump from its flow curve at the working lift, allowing for hose length and bends. A headline maximum litres-per-hour figure is measured under different conditions from most installed features. The vertical lift is measured from the pond or reservoir water surface to the outlet.

Variable flow makes adjustment easier during commissioning. Start gently and increase the flow while checking the full outlet, the landing position and the splash area. Wider outlets and longer pipe routes need particular attention. Send us the selected blade size, lift and pipe route if you need help choosing a pump.

Care and seasonal use

Wipe the stainless steel regularly with a soft cloth and remove deposits before they build up. Avoid chlorine-based cleaners; stainless steel can stain or corrode, particularly with salt exposure. Keep cleaning residues out of the pond. If shutting the feature down for winter, drain and dry the blade and exposed pipework.

Useful checks before ordering

Check the selected size, the fixing space, the pipe connection and the collection area together. Gallery photographs show examples of the range; use the size table and selected option for your order. Pumps, reservoirs and surrounding landscaping shown in installation photographs are not included with the blade.

Size options and product codes

Codes for the options sold on this page

Option	Product code
200mm	CWB200-1
300mm	CWB300-1
400mm	CWB400-1
500mm	CWB500-1
600mm	CWB600-1

Explore the stainless steel water-blade range.