Aquaforte Phospat 3

SKU: MD996
GTIN: 8717605104218
Brand

Treatment Type

Dechlorination and water purification

Target Problem

chloramine, Chlorine, tap water contaminants and heavy metals

Product Form

Liquid / pond treatment

Seasonal Use

Year round / Water changes

Treatment Purpose

Water clarity and nutrient control

Aquaforte Phospat 3 is a phosphate-removing filter cartridge for phosphate control in suitable pond circulation systems. It is treatment equipment, not a water test kit. Fit it behind appropriate pre-filtration and replace the cartridge when saturated.

£1,135.99 (inc VAT)

Out of stock

Out of stock

Aquaforte Phospat 3

Phosphate removal through a replaceable filter cartridge

AquaForte Phospat 3 is the larger phosphate-removing cartridge in the Phospat range. It is designed for ponds, swimming ponds, fountains and circulation wells where phosphate reduction is needed to reduce one of the main food sources for blanketweed and algae.

Aquaforte Phospat 3 is an advanced, high-capacity phosphate remover designed to dramatically reduce the phosphate levels in your pond water—the primary nutrient responsible for blanketweed and algae growth. By keeping phosphate levels below the critical threshold of 0.035 mg/l, the Phospat 3 makes it nearly impossible for algae to thrive, without harming aquatic plants or beneficial bacteria. With an adsorption capacity of up to 270,000 mg, Phospat 3 outperforms traditional phosphate removers such as iron (III) oxide by up to 100 times.

Unlike many competing products, the Phospat permanently locks in the phosphate, preventing any release back into the water, even when saturated. Ideal for use in ponds, natural swimming pools, water features, and recirculation systems, this unit handles a flow rate of up to 3300 litres per hour and is suitable for water volumes up to 150,000 litres (150m³).

Water testing products are the starting point for most pond treatment decisions. Accurate test results help show whether the issue is ammonia, nitrite, pH, KH, phosphate, chlorine, nitrate or another water parameter. This avoids guessing, reduces unnecessary dosing and gives a clearer record of how the pond responds after treatment, water changes or filter maintenance.

AquaForte water treatment products include phosphate control, water improvement and sludge/nutrient management. Their Phospat products reduce phosphate, one of the key nutrients that feeds filamentous algae and green water issues.

Using the phosphate cartridge

Fit the Phospat cartridge behind a suitable pre-filter so dirt does not block its media. Test phosphate before and after use, maintain the specified flow and replace the cartridge when saturated.

Key benefits

  • Uses solid media to bind phosphate from flowing water
  • Removes dissolved phosphate through a replaceable media cartridge
  • Useful for koi ponds, garden ponds and larger pond systems
  • Works alongside water testing; it is not a measurement device
  • Works alongside separate phosphate tests to check performance
  • Use a pre-filter and replace the cartridge when exhausted

Technical information

  • Brand: AquaForte
  • Treatment type: Phosphate-removal filter cartridge
  • Product form: Replaceable solid-media cartridge
  • Target issue: Dissolved phosphate
  • Best use: When measured phosphate and the cartridge instructions indicate a need
  • SKU / product code: MD996
  • Dosage / capacity guidance: Phospat 3 adsorption capacity approx. 270,000mg phosphate; flow up to approx. 3,300 LPH; suitable up to approx. 150m³
  • Important note: Install behind pre-filtration, maintain the specified circulation flow and monitor phosphate

How to use safely

The product label should always take priority over general guidance. The points below are included to help customers use Aquaforte Phospat 3 in a more careful and informed way.

  • Maintain pond circulation within the specified cartridge flow range.
  • Replace the phosphate-binding cartridge when saturated; it has no test reagents.
  • Follow the supplied installation and first-use flushing instructions.
  • Check treated-water performance and replace exhausted media according to the manufacturer instructions.
  • Test before dosing treatments and again afterwards where suitable.
  • Check the treated outlet water with a separate suitable test.

Helpful related products and advice

Use these links to compare similar products in the same range or choose supporting testing, purifier or maintenance products where relevant.

Related treatment options

For similar pond treatments, compare Water Clarity & Nutrient Control, Microbe Lift Natural Complete Kit, Microbe-Lift Natural Clear. These links are included to help you choose the right product for the same type of pond problem, rather than as random add-ons.

Products related to the Aquaforte Phospat 3

Aquaforte Phospat 3 Reviews

Reviews

There are no reviews yet.

Be the first to review “Aquaforte Phospat 3”