Pontec PondoStar LED Set 6 Pond Lights
| Brand | |
|---|---|
| Wattage | 6 Ă— 0.5W |
| IP Rating | IP68 |
| Power Source | 12V Transformer |
| Light Type | Pondlight, Spot Light |
| Light Colour | Neutral White |
| Guarantee | 2 Years |
| Included Lights | 6 |
Six compact 0.5W neutral-white IP68 pond spotlights with weighted adjustable bases and a 12V safety transformer for subtle underwater and garden illumination.
£79.95 (inc VAT)
Pontec PondoStar LED Set 6 Pond Lights
Low-voltage lighting for ponds, fountains and garden features
The PondoStar LED Set 6 spreads six small neutral-white spotlights around a pond, stream or garden feature without the harshness of a few oversized lamps. Each fitting draws only 0.5W, so the complete set provides gentle accent lighting with a total LED load of 3W.
Weighted bases and adjustable heads make the lights easy to aim at planting, rocks, fountain spray or a short cascade. Because the six fittings are wired in series at fixed intervals, this set works best where the lighting points follow one connected route around the same feature.
Verified technical information
| GB article number | 57741 |
|---|---|
| Set contents | 6 compact LED spotlights and transformer |
| Power per light | 0.5W |
| Light colour | Neutral white |
| Supply | 12V safety transformer |
| Cable layout | 2m mains, 3m to first light, then 5 Ă— 1.2m |
| Protection | IP68 lights |
| Maximum immersion | Approximately 1m |
| Guarantee | 2 years |
Installation details that affect the result
- Lay the complete daisy-chain out dry before installing it so the fixed 1.2m spacing is understood.
- Use the adjustable bases to skim light across texture rather than pointing fittings towards the viewing position.
- Keep each cable clear of pump inlets and sharp coping edges.
- Keep the transformer and every non-submersible connection in the location specified by the manufacturer.
- Arrange cable runs before filling or landscaping so plugs and junctions remain accessible.
- Clean algae and mineral deposits from lenses with a soft cloth; abrasive pads can permanently dull the light.
- Use an RCD-protected outdoor supply and isolate the circuit before handling any light or cable.
Complete the lighting scheme
Combine this product with suitable fountain pumps, waterfalls or other fittings from our pond-lighting range. Use warm or neutral white light for a restrained natural effect, and choose RGB only where deliberate colour scenes are wanted. For colour-changing scenes, compare the PondoStar LED RGB Set 3; for a fountain stem, use the PondoStar LED Ring.
Frequently asked questions
Can the lights be used underwater?
Only the components stated as IP68 may be submerged, and only to the depth specified in the instructions. Transformers, controllers and mains plugs must remain in their designated dry or weather-protected locations.
Can the LEDs be replaced?
These compact sealed light fittings use integrated LEDs. The lamp module is not treated as a replaceable bulb.
Will pond lights disturb fish?
Occasional evening lighting is normally used decoratively, but fish and wildlife still benefit from a natural dark period. Avoid leaving bright lights running throughout the night.



Reviews
There are no reviews yet.