Oase FiltoSmart Thermo 300 External Aquarium Filter with Heater

SKU: 42697
Brand

Manufacturer SKU

42697

Aquarium guide

Up to 300 L

Maximum pump flow

1,000 L/h

Power

23 W

Heater

HeatUp 300, 300 W included

Heater setting

18–32 °C

Filter volume

6.4 L

Pre-filter volume

1.5 L

Maximum pump head

1.3 m

Dimensions (L × W × H)

288 × 179 × 428 mm

Net weight

5.53 kg

Hose ID/OD

16 / 22 mm; supplied length 2.5 m

Filter cable

1.5 m

Supply / water

230 V / 50 Hz; freshwater or saltwater

Heated external filter for aquariums up to 300 litres, with 1,000 L/h maximum pump flow, an included 300 W HeatUp heater and 16 / 22 mm hose.

£131.38 (inc VAT)

Heated filtration outside the aquarium

The Oase FiltoSmart Thermo 300 External Aquarium Filter with Heater combines an external aquarium filter with an included adjustable heater. Oase recommends this model for freshwater or saltwater aquariums up to 300 litres. The pump is rated at 23 W with a maximum flow of 1,000 litres per hour; the separate HeatUp heater is rated at 300 W.

Housing the heater within the filter system helps keep equipment out of the aquarium display. Oase lists an 18–32 °C setting range for the included HeatUp heater. The heater is thermostatically controlled, so its 300 W rating is its heating output when active, not a claim that the heater draws that power continuously. Use a separate thermometer to check the water temperature.

Choose the right size and installation space

This is the largest of these three heated FiltoSmart models, with a 300-litre guide and 1,000 L/h maximum pump flow. The Thermo 200 is rated up to 200 litres with an 800 L/h maximum. The standard FiltoSmart 300 has the 300-litre guide without an included heater.

The aquarium volume is a guide, not a promise that one filter will suit every stocking level. Consider feeding, planting, the temperature difference from the room and the current appropriate for your fish. The 1,000 L/h pump figure is a maximum: hose route, height, settings and media condition affect circulation in use.

The 288 × 179 × 428 mm housing is 91 mm taller than the Thermo 200. Measure the cabinet opening and allow working space above the unit as well as for its hoses. Oase lists a carrying handle for the 200 and 300; move the canister only after safe isolation and disconnection. Oase gives a maximum head of 1.3 m; do not assume the rated maximum flow is delivered at that height.

What comes with the Thermo package

Oase identifies this heated package as the FiltoSmart 300 filter, article 42683, the HeatUp 300 heater, article 42730, and the ThermoFit 300 adapter, article 45050. Those heating components are included in the Thermo 300; they are not optional extras needed to complete this package.

The filter is also supplied with media, adapters, intake and outlet pipework, water diffuser and one 2.5 m length of hose. Oase lists the hose as 16 / 22 mm internal/external diameter. Its stated filter volume is 6.4 L, and its separately listed pre-filter volume is 1.5 L. Plan the hose route and the location of both electrical connections before installation.

New media do not make an aquarium biologically mature immediately. Cycle a new aquarium and monitor ammonia, nitrite and nitrate with appropriate tests; when replacing an established filter, retain useful mature biological media where practical.

Safe set-up and heater operation

Install the canister, hose, intake and return according to the instructions supplied with the filter. Keep hoses free of tight kinks, secure the connections and use drip loops so water cannot run down the cables into the electrical connections. The self-venting function helps air leave after proper start-up; follow the supplied filling and start-up instructions and never run the pump dry.

Switch on the heater only when the filter is completely filled, running and circulating water continuously. This is the Oase HeatUp manual’s precaution for a heater inside an approved filter. Follow the heater instructions for its installation and temperature setting, and use a separate thermometer to check the aquarium once it has stabilised.

Before opening the filter or putting hands in the aquarium, disconnect the filter, heater and other aquarium electrical equipment. Allow the heater to cool before removing it. Check the reassembled connections and normal water circulation before returning the heater to service.

Servicing and compatible replacements

EasyClick opens the canister for media servicing, and the automatic connection shut-off described by Oase helps limit unwanted water loss during cleaning. The inlet and outlet adapters allow flow adjustment, but maintain enough circulation for the aquarium and for the heater. Keep a towel or container nearby and inspect the seals and hose connections after maintenance.

Rinse reusable mature foam gently in water removed from the aquarium, without detergent. Stagger replacement of established media where practicable so the filter retains useful biological activity. If flow falls, check the intake, hoses, media and impeller, and follow the supplied instructions when refilling and restarting.

Oase lists separate FiltoSmart 300 foam set 45106, replacement rotor 45348 and hose 46495. BioCore 95348 and carbon media 45101 are additional media choices; select the correct stage for the filter rather than treating them as part of the heater package.

Specifications and common questions

Specification Detail
Aquarium guide Up to 300 L
Maximum pump flow 1,000 L/h
Pump power 23 W
Heater HeatUp 300, 300 W included
Heater setting 18–32 °C
Filter volume 6.4 L
Pre-filter volume 1.5 L
Maximum pump head 1.3 m
Dimensions (L × W × H) 288 × 179 × 428 mm
Net weight 5.53 kg
Hose ID/OD 16 / 22 mm; supplied length 2.5 m
Filter cable 1.5 m
Supply / water 230 V / 50 Hz; freshwater or saltwater

Is the heater included? Yes. The Thermo 300 includes the 300 W HeatUp heater and matching ThermoFit adapter. The standard FiltoSmart 300 is a separate unheated model.

What hose does it use? Oase specifies 16 / 22 mm internal/external diameter and supplies one 2.5 m length.

Does it deliver 1,000 L/h in every installation? No. That is the rated maximum. Hose routing, height, adjustment and media condition affect installed flow.

See more aquarium equipment and accessories.

Oase FiltoSmart Thermo 300 External Aquarium Filter with Heater Reviews

Reviews

There are no reviews yet.

Be the first to review “Oase FiltoSmart Thermo 300 External Aquarium Filter with Heater”