Oase FiltoSmart 100 External Aquarium Filter

SKU: 42681
Brand

Manufacturer SKU

42681

Aquarium size guide

100 litres maximum

Rated supply

230 V / 50 Hz

Power

11 W

Cable length

1.5 m

Maximum flow

600 litres/hour

Filter volume

1.3 litres

Maximum head

1.1 m

Pre-filter volume

0.7 litres

Heater included

No

Dimensions (L × W × H)

205 × 139 × 260 mm

Hose ID / OD

12 / 16 mm

Hose supplied

2.5 m

Water type

Freshwater and saltwater

Compact external filter for freshwater or marine aquariums up to 100 litres, with media and connection equipment. Rated maximum flow 600 L/h; standard model supplied without a heater.

£77.98 (inc VAT)

External filtration without filling the aquarium with equipment

The Oase FiltoSmart 100 is an external aquarium filter for tanks up to 100 litres. Its filter chamber sits outside the aquarium, while the intake and return fittings sit in the water. That leaves space inside the display and gives you access to a separate canister for maintenance. Oase specifies it for both freshwater and saltwater aquariums.

This is the standard, unheated FiltoSmart 100, article 42681. The FiltoSmart Thermo 100 is a separate heated model. Choose the standard filter when you already have appropriate heating, do not need a heater, or want the option of adding a compatible heater and adapter later.

New filter media do not make a new aquarium biologically mature immediately. Allow the aquarium to cycle and use suitable tests to monitor ammonia, nitrite and nitrate. When replacing an established filter, preserve useful mature filtration where practicable rather than discarding all established media at once.

Choosing the right size and planning the installation

Oase gives the 100 a maximum pump flow of 600 litres per hour and an aquarium-size guide of up to 100 litres. Those figures describe different things: one is the pump’s rated maximum flow, while the other is the manufacturer’s maximum tank-size guide. The water returned to the aquarium depends on installation height, hose route, adjustment and the condition of the media. Consider the fish you keep, feeding, plants and available swimming space as well as the nominal tank volume.

The canister measures 205 × 139 × 260 mm and is designed to stand beside or below the aquarium. Check the cabinet opening as well as space above and around the unit for hoses, connections and maintenance. The supplied hose is one 2.5 m length; its 12 mm internal and 16 mm external diameters are two measurements of the same hose. The pump’s maximum head is 1.1 m; it is not a promise of 600 litres per hour at that height.

Installation and a safe first start

Set the filter up using the base and fittings described in the supplied instructions, position the intake and outlet in the tank, and route the hose without sharp bends or kinks. Follow the instructions supplied with your unit for cutting and securing the hose, preparing the media and checking that the head and seals are seated correctly. Leave room to inspect the connections for leaks after installation and every service.

Follow the instructions supplied with your unit to fill, position and start the filter correctly. Do not run the pump dry, and check the connections and circulation after starting.

Keep plugs and sockets dry, arrange a drip loop in the electrical cable, and disconnect aquarium electrical equipment before putting your hands in the water or servicing it. If a compatible heater is fitted later, follow its separate instructions too: the filter must be filled and circulating before the heater is switched on, and the heater must be allowed to cool before removal.

Filter care and troubleshooting

The EasyClick opening mechanism makes the filter chamber easier to access for maintenance. Oase describes an automatic shut-off at the connections to help prevent unwanted water loss during servicing; check the seals and connections when reassembling. The inlet and outlet adapters also allow you to adjust the flow to suit the aquarium while maintaining suitable circulation.

The filter uses mechanical and biological media: foam catches suspended debris, while established media also support beneficial microorganisms. Maintenance depends on the aquarium and its stocking rather than a fixed replacement date. Check the intake and return regularly, and service the filter when flow falls or the media need attention. Oase’s guidance for an established aquarium recommends cleaning filter media in water removed from the tank, without soap or detergent, to help protect beneficial bacteria.

Where the filter contains multiple established media elements, avoid replacing everything at once unless a specific treatment requires it. Oase recommends staggered replacement so bacteria can recolonise new media. If flow remains weak, check for a blocked intake, kinked or dirty hose, restricted flow setting, dirty media or a fouled impeller. Persistent noise after normal venting can indicate trapped air; disconnect the unit and follow the manual’s vent-hose and restart checks.

What is included, and what is extra?

Oase describes the standard filter as supplied with filter media, hose, adapters, intake and outlet pipes and a water distributor. The manufacturer lists a 2.5 m hose length. The heater is not included. For the 100 W heating arrangement Oase identifies a separate HeatUp 100 heater, article 42726, and ThermoFit FiltoSmart 100 adapter, article 45047; both are additional products. The Thermo 100 is a distinct complete heated model, not another name for this unheated package.

For later maintenance, Oase lists the FiltoSmart 100 replacement foam set, article 45104, BioCore 1 litre, article 95348, and carbon filter media, article 45101, as separately sold parts. Check the exact media and the supplied manual before choosing replacements. Extra media and the heater conversion are not additional items included in this listing; availability depends on their own listings.

Technical overview and common questions

Specification Detail
Aquarium size guide Up to 100 litres
Maximum pump flow 600 litres per hour
Pump power 11 W (230 V / 50 Hz)
Filter / pre-filter volume 1.3 L / 0.7 L
Maximum pump head 1.1 m
Dimensions (L × W × H) 205 × 139 × 260 mm
Net weight 2.28 kg
Hose ID/OD 12 / 16 mm; supplied length 2.5 m
Power cable 1.5 m
Water type Freshwater and saltwater
Heater Not included

Can the FiltoSmart 100 be used on a marine aquarium?

Oase lists the filter for freshwater and saltwater. Choose media and a maintenance routine appropriate to the system, and assess the inhabitants’ needs rather than relying on tank volume alone.

Is this the same as a FiltoSmart Thermo 100?

No. This listing is for the standard filter without a heater. The Thermo 100 is a separate heated product; the standard 100 can be fitted with the named heater and adapter purchased separately.

Why is the flow lower than 600 litres per hour?

Six hundred litres per hour is the rated maximum, not a measured flow promised for every aquarium. Height, hose arrangement, adjustment and media condition affect the installed system. Check the intake, hose and media first if flow has fallen since the previous service.

Explore more aquarium equipment and supplies.

Oase FiltoSmart 100 External Aquarium Filter Reviews

Reviews

There are no reviews yet.

Be the first to review “Oase FiltoSmart 100 External Aquarium Filter”