Oase FiltoSmart Thermo 100 External Aquarium Filter with Heater
| Brand | |
|---|---|
| Manufacturer SKU | 42684 |
| Aquarium guide | Up to 100 L |
| Maximum pump flow | 600 L/h |
| Power | 11 W |
| Heater | HeatUp 100, 100 W included |
| Heater setting | 18–32 °C |
| Filter volume | 1.3 L |
| Pre-filter volume | 0.7 L |
| Maximum pump head | 1.1 m |
| Dimensions (L × W × H) | 205 × 139 × 260 mm |
| Net weight | 2.657 kg |
| Hose ID/OD | 12 / 16 mm; supplied length 2.5 m |
| Filter cable | 1.5 m |
| Supply / water | 230 V / 50 Hz; freshwater or saltwater |
Heated external filter for aquariums up to 100 litres, with 600 L/h maximum pump flow, an included 100 W HeatUp heater and 12 / 16 mm hose.
£92.28 (inc VAT)
Heated filtration outside the aquarium
The Oase FiltoSmart Thermo 100 External Aquarium Filter with Heater combines an external aquarium filter with an included adjustable heater. Oase recommends this model for freshwater or saltwater aquariums up to 100 litres. The pump is rated at 11 W with a maximum flow of 600 litres per hour; the separate HeatUp heater is rated at 100 W.
Housing the heater within the filter system helps keep equipment out of the aquarium display. Oase lists an 18–32 °C setting range for the included HeatUp heater. The heater is thermostatically controlled, so its 100 W rating is its heating output when active, not a claim that the heater draws that power continuously. Use a separate thermometer to check the water temperature.
Choose the right size and installation space
The Thermo 100 is the compact heated model in this group: its 100-litre guide and 600 L/h maximum are below the Thermo 200’s 200-litre guide and 800 L/h maximum. The standard FiltoSmart 100 has the same tank guide but is supplied without a heater.
The aquarium volume is a guide, not a promise that one filter will suit every stocking level. Consider feeding, planting, the temperature difference from the room and the current appropriate for your fish. The 600 L/h pump figure is a maximum: hose route, height, settings and media condition affect circulation in use.
Its housing measures 205 × 139 × 260 mm, so check the cabinet opening and leave room above the canister for hoses and servicing. Oase lists the supplied hose as 12 mm internal and 16 mm external diameter; the larger 200 and 300 use a different hose size. Oase gives a maximum head of 1.1 m; do not assume the rated maximum flow is delivered at that height.
What comes with the Thermo package
Oase identifies this heated package as the FiltoSmart 100 filter, article 42681, the HeatUp 100 heater, article 42726, and the ThermoFit 100 adapter, article 45047. Those heating components are included in the Thermo 100; they are not optional extras needed to complete this package.
The filter is also supplied with media, adapters, intake and outlet pipework, water diffuser and one 2.5 m length of hose. Oase lists the hose as 12 / 16 mm internal/external diameter. Its stated filter volume is 1.3 L, and its separately listed pre-filter volume is 0.7 L. Plan the hose route and the location of both electrical connections before installation.
New media do not make an aquarium biologically mature immediately. Cycle a new aquarium and monitor ammonia, nitrite and nitrate with appropriate tests; when replacing an established filter, retain useful mature biological media where practical.
Safe set-up and heater operation
Install the canister, hose, intake and return according to the instructions supplied with the filter. Keep hoses free of tight kinks, secure the connections and use drip loops so water cannot run down the cables into the electrical connections. The self-venting function helps air leave after proper start-up; follow the supplied filling and start-up instructions and never run the pump dry.
Switch on the heater only when the filter is completely filled, running and circulating water continuously. This is the Oase HeatUp manual’s precaution for a heater inside an approved filter. Follow the heater instructions for its installation and temperature setting, and use a separate thermometer to check the aquarium once it has stabilised.
Before opening the filter or putting hands in the aquarium, disconnect the filter, heater and other aquarium electrical equipment. Allow the heater to cool before removing it. Check the reassembled connections and normal water circulation before returning the heater to service.
Servicing and compatible replacements
The EasyClick opening gives access to the canister for cleaning; Oase also describes automatic shut-off to help limit unwanted water loss during service. The inlet and outlet adapters allow flow adjustment, but maintain enough circulation for the aquarium and for the heater. Keep a towel or container nearby and inspect the seals and hose connections after maintenance.
Rinse reusable mature foam gently in water removed from the aquarium, without detergent. Stagger replacement of established media where practicable so the filter retains useful biological activity. If flow falls, check the intake, hoses, media and impeller, and follow the supplied instructions when refilling and restarting.
Oase lists separate FiltoSmart 100 foam set 45104, replacement rotor 45346 and hose 46494. BioCore 95348 and carbon media 45101 are additional media choices; select the correct stage for the filter rather than treating them as part of the heater package.
Specifications and common questions
| Specification | Detail |
|---|---|
| Aquarium guide | Up to 100 L |
| Maximum pump flow | 600 L/h |
| Pump power | 11 W |
| Heater | HeatUp 100, 100 W included |
| Heater setting | 18–32 °C |
| Filter volume | 1.3 L |
| Pre-filter volume | 0.7 L |
| Maximum pump head | 1.1 m |
| Dimensions (L × W × H) | 205 × 139 × 260 mm |
| Net weight | 2.657 kg |
| Hose ID/OD | 12 / 16 mm; supplied length 2.5 m |
| Filter cable | 1.5 m |
| Supply / water | 230 V / 50 Hz; freshwater or saltwater |
Is the heater included? Yes. The Thermo 100 includes the 100 W HeatUp heater and matching ThermoFit adapter. The standard FiltoSmart 100 is a separate unheated model.
What hose does it use? Oase specifies 12 / 16 mm internal/external diameter and supplies one 2.5 m length.
Does it deliver 600 L/h in every installation? No. That is the rated maximum. Hose routing, height, adjustment and media condition affect installed flow.
See more aquarium equipment and accessories.




Reviews
There are no reviews yet.