Oase FiltoSmart 60 External Aquarium Filter
| Brand | |
|---|---|
| Manufacturer SKU | 42680 |
| Aquarium size guide | 60 litres maximum |
| Rated supply | 230 V / 50 Hz |
| Power | 5 W |
| Cable length | 1.5 m |
| Maximum flow | 300 litres/hour |
| Filter volume | 0.5 litres |
| Maximum head | 0.7 m |
| Pre-filter volume | 0.28 litres |
| Heater included | No |
| Dimensions (L × W × H) | 150 × 90 × 164 mm |
| Hose ID / OD | 8 / 12 mm |
| Hose supplied | 1 m |
| Water type | Freshwater and saltwater |
External filter for freshwater or marine aquariums up to 60 litres, with a 300 L/h maximum flow rating, filter media and hose connections. The standard filter is supplied without a heater.
£52.97 (inc VAT)
External filtration for a smaller aquarium
The Oase FiltoSmart 60 is a compact external filter designed for freshwater or saltwater aquariums up to 60 litres. The filter container sits outside the aquarium, with the intake and return fittings positioned in the water. This keeps the filter media accessible without filling the display with a large internal filter, while still leaving hoses and fittings to plan around.
This is the standard FiltoSmart 60, article 42680, rather than a heated Thermo package. Its maximum pump rating is 300 litres per hour and its filter motor is rated at 5 W. The stated flow is a maximum: tubing, installation height and dirty media affect the circulation experienced in an established aquarium. Choose for the animals, planting and feeding level as well as the tank’s quoted capacity.
What it does and who it suits
Water passes through filter media in the external container, where the foam helps trap suspended debris and media surfaces provide room for beneficial filter bacteria to develop. Filtration supports a stable, maintained aquarium; a new filter does not immediately contain a mature biological colony and is not a substitute for appropriate water changes or testing.
Oase specifies a 0.5-litre filter volume and a 0.28-litre pre-filter volume. The unit suits a small aquarium where an external filter and short hose run are practical. For a larger aquarium, compare the FiltoSmart 100, which Oase rates for tanks up to 100 litres with a 600 L/h maximum pump flow. A larger quoted pump figure alone is not proof that it is the right choice for every animal: consider the desired current and available installation space.
What comes with the filter
Oase describes the filter as a complete unit with filter media and the equipment needed to connect the intake and outlet. The stated hose allowance is one 1 m length, to be cut for the installation as directed; check the intended route before positioning the unit. The standard 60 is supplied without an aquarium heater. Any heater, thermometer and the aquarium itself are separate purchases.
The Oase FiltoSmart 60 bracket, article 45051, is an optional holder for attaching the filter to the outside of the aquarium; it is not included with the standard filter. Replacement foam set 45102 and BioCore media are available separately.
Positioning, first start and everyday use
Allow room for the external housing, the two hose runs and access for servicing. Oase gives the housing dimensions as 150 × 90 × 164 mm. Keep the unit in the position and within the height limits described in the supplied instructions, and route the hose without sharp kinks or strain on the connections. Secure the intake and outlet in the aquarium and make a drip loop in the electrical cable.
Before first use, remove the packaging from the media and follow the manual’s instructions for rinsing new media. The FiltoSmart 60 instructions say to fill the container completely with water before switching on; never run its pump dry. Air can take several minutes to leave the unit after start-up. Check the connections and water circulation, and follow the current manual supplied with the filter if its diagrams or steps differ.
The supplied hose has an 8 mm internal diameter and a 12 mm external diameter. Oase lists a matching 1 m replacement hose, article 46493, separately.
Cleaning and troubleshooting
Disconnect aquarium electrical equipment before removing the filter for maintenance, and keep a towel and suitable container close by when opening the hoses or housing. Check the intake first if the flow falls: leaves, debris and an obstructed intake can restrict it. The manufacturer’s fault guide also identifies dirty filter foam, substrate, pipework or an impeller as possible causes. Inspect and clean these according to the manual before assuming a replacement pump is required.
For an established aquarium, rinse reusable filter media gently in water removed from that aquarium, not in detergent. Avoid replacing every mature media element at once unless there is a specific reason: preserving part of the established biological media helps the filter recover. Replace damaged or permanently blocked components with compatible parts and reassemble, refill and check the unit before returning it to use.
Specifications and common questions
| Specification | Detail |
|---|---|
| Aquarium size guide | Up to 60 litres |
| Maximum pump flow | 300 litres per hour |
| Pump power | 5 W (230 V / 50 Hz) |
| Filter / pre-filter volume | 0.5 L / 0.28 L |
| Maximum pump head | 0.70 m |
| Dimensions (L × W × H) | 150 × 90 × 164 mm |
| Hose ID/OD | 8 / 12 mm; supplied length 1 m |
| Power cable | 1.5 m |
| Water type | Freshwater and saltwater |
| Heater | Not included |
Can it heat the aquarium? No heater is supplied with this standard FiltoSmart 60. If the aquarium needs heating, choose a suitable separate heater for the tank and its inhabitants; do not assume the heater fittings listed for larger filters fit this model.
Is it suitable for a marine tank? Oase lists the filter for both freshwater and saltwater. Size it for the aquarium’s actual needs and follow the care and equipment guidance for that system.
Explore more aquarium equipment and accessories.




Reviews
There are no reviews yet.