Oase BioCompact 25 Internal Aquarium Filter
| Brand | |
|---|---|
| Manufacturer SKU | 42678 |
| Aquarium size guide | 25 litres maximum |
| Rated supply | 230 V / 50 Hz |
| Power | 5 W |
| Cable length | 1.5 m |
| Maximum flow | 240 litres/hour |
| Filter volume | 0.1 litres |
| Maximum head | 0.4 m |
| Adjustable flow | 120–240 litres/hour |
| Heater included | No |
| Water type | Freshwater and saltwater |
Compact internal filter for freshwater or saltwater aquariums up to 25 litres. Adjustable 120–240 L/h flow, filter foam and a 1.5 m power cable; heater not included.
£15.82 (inc VAT)
Compact filtration inside a small aquarium
The Oase BioCompact 25 Internal Aquarium Filter is designed for a freshwater or saltwater aquarium up to 25 litres. It combines a small pump and filter media in one submerged unit, so there is no external canister or hose run to accommodate. The 1.5 m power lead still needs a safe route to the socket, and the unit needs enough room to be removed for cleaning.
Its outlet can be adjusted across Oase’s stated 120–240 litres per hour range. Start with a flow that circulates the water without pushing the inhabitants around, then observe how the aquarium responds. The maximum is a pump rating; the actual current depends on the setting, installation and condition of the media.
Choose the right size and position
The 25 is the smaller-capacity choice in the pair. The BioCompact 50 is rated for an aquarium up to 50 litres and has a larger 0.2-litre filter volume; both have the same stated maximum 240 L/h flow, so select by the aquarium and maintenance needs rather than expecting twice the pump rate. Tank volume is a useful starting point, not the only measure of filter suitability: stocking, feeding, planting and the desired water movement all matter. A well-established small aquarium with light stocking may have different needs from a heavily fed tank of the same capacity.
Oase says the BioCompact can be installed horizontally as well as vertically, making it a possible choice for a suitable paludarium. Keep the operating unit submerged in accordance with the supplied instructions, with the outlet arranged to circulate water without emptying it outside the aquarium. Check access behind plants, decorations and the lid before fixing it in place; do not use a dry-running filter in a shallow feature.
Filter media and what is supplied
Oase supplies filter foam with the unit and lists replacement BioCompact 25 foam set 45099 separately.
The filter and its media are the starting point, not an instantly mature biological system. Filter foam catches suspended particles and provides a surface on which beneficial bacteria can establish. Allow a new aquarium to cycle appropriately and monitor water quality; a filter does not remove the need for regular water changes.
The standard BioCompact is not an aquarium heater. The tank, thermometer and any heater are separate, so choose heating and temperature monitoring for the species being kept rather than treating this filter as a heated model.
Installation and ongoing maintenance
Use the supplied mounting arrangement as directed and check it is secure before switching on. Keep the intake clear of gravel, leaves and decorations, and use a drip loop so water cannot run down the cable into the electrical connection. Follow the current instructions for the correct position, electrical isolation and minimum water coverage; the pump must not run dry.
When the outlet flow falls, look for an obstructed intake or loaded filter foam before increasing the outlet setting. Disconnect the aquarium’s electrical equipment before putting hands into the water or removing the filter. Clean the pump and impeller as directed, and check that the parts are seated correctly before restarting.
Rinse established reusable foam gently in water removed from the aquarium, without soap or detergent. A complete replacement of every mature medium at once can disturb the bacteria the tank relies on; keep usable established material and stagger replacements where practicable. Replace worn or damaged foam with the correct BioCompact 25 part rather than assuming the BioCompact 50 foam is interchangeable.
Specifications and common questions
| Specification | Detail |
|---|---|
| Manufacturer / article | Oase / 42678 |
| Filter type | Submersible internal aquarium filter |
| Aquarium size guide | Up to 25 litres |
| Adjustable water flow | 120–240 litres per hour |
| Maximum pump head | 0.4 m |
| Filter volume | 0.1 litres |
| Rated supply | 230 V / 50 Hz |
| Power consumption | 5 W |
| Power cable | 1.5 m |
| Water type | Freshwater and saltwater |
| Heater included | No |
Can the flow be reduced? Yes. Oase describes an adjustable outlet with a stated flow range of 120–240 L/h. Adjust it for the layout and check that circulation remains adequate throughout the aquarium.
Can it be used in saltwater? Oase lists this model for freshwater and saltwater. Maintain the equipment and check compatibility with the rest of the system as directed in the instructions.
Does it include a heater? No. Select a separate aquarium heater and thermometer where the animals or plants need a temperature-controlled environment.
See our aquarium equipment and accessories.




Reviews
There are no reviews yet.