Fluval U1 Underwater Aquarium Filter A465 – Up to 55 Litres
| Brand | |
|---|---|
| Model | U1 |
| Part number | A465 |
| Tank guide | Up to 55 litres |
| Max flow | 250 L/h (manufacturer nominal maximum) |
| Power | 4.5 W |
| Supply | 230–240 V / 50 Hz |
| Size H × W × D | 15 × 8 × 10 cm |
| Media | 1 foam pad |
| Outlet | Adjustable directional nozzle |
| Aeration | Venturi valve |
| Mounting | 3 suction cups |
| Water type | Freshwater and saltwater |
| Use | Indoor; fully submerged |
| Max water temp | 35 °C |
| Pack size | 1 complete filter |
Compact Fluval U1 underwater filter A465 for aquariums up to 55 litres. Supplied with one foam pad, adjustable directional outlet and venturi valve. Manufacturer maximum flow 250 L/h; 4.5 W at 230–240 V / 50 Hz.
£37.52 (inc VAT)
Fluval U1 Underwater Aquarium Filter A465 – Up to 55 Litres
The Fluval U1 A465 is the compact foam-filter model in the U Series, with a manufacturer aquarium guide of up to 55 litres. It provides internal filtration and adjustable water movement without needing an external canister beside the aquarium. One foam pad is included as the standard filter medium.
Choosing the compact U1
The U1 uses a foam pad rather than the three-media arrangement supplied with U2, U3 and U4. Its nominal maximum manufacturer flow is 250 L/h and the UK electrical specification is 4.5 W at 230–240 V / 50 Hz. Maximum pump flow is a comparison figure; circulation through a working, media-loaded filter will depend on its setup and condition.
Use the up-to-55-litre figure as a manufacturer selection guide, taking account of livestock, feeding and maintenance. It may also provide supplementary filtration in an appropriate larger setup. At 15 × 8 × 10 cm, measured as height × width × depth, it is the shortest of these four U models. Allow space above the lid for maintenance.
Installation and adjustable movement
Before first use, identify the parts and rinse the new foam as directed in the instructions. Fit the directional outlet and venturi components, secure the filter using its three suction cups and check that the cable is correctly routed.
Keep the filter fully immersed and the top outlet at least 1 cm below the water surface. If using venturi aeration, the air valve must remain above the water. Adjust the flow control and directional nozzle to suit the aquarium. U1 has its own adjustable outlet; it is not the three-way top, spray-bar and bottom outlet system of U2–U4.
Use indoors only, with water no warmer than 35 °C. Arrange a drip loop, keep plugs and sockets dry and follow the supplied electrical instructions. Disconnect all aquarium appliances before putting hands in the water or carrying out maintenance, and never run the filter dry.
Looking after the foam and impeller
Check and clean the foam regularly in water removed from the aquarium during maintenance. Avoid soap or detergents and avoid rinsing established filter media under a tap. Clean the impeller and its chamber as directed, and inspect moving parts for wear if the filter will not restart normally.
Keep routine water changes and water-quality checks in your aquarium care plan. The flip-top cover gives access to the foam, and replacement foam must be the model-specific U1 article A485.
What is supplied
One Fluval U1 A465 filter with one foam pad, directional outlet nozzle, venturi valve and three suction cups. BIOMAX rings and Poly/Carbon cartridges are not part of the standard U1 media arrangement. Additional optional media described separately by Fluval should not be assumed to be supplied.
Technical overview
| Specification | Details |
|---|---|
| Brand | Fluval |
| Model | U1 |
| Part number | A465 |
| Tank guide | Up to 55 litres |
| Max flow | 250 L/h (manufacturer nominal maximum) |
| Power | 4.5 W |
| Supply | 230–240 V / 50 Hz |
| Size H × W × D | 15 × 8 × 10 cm |
| Media | 1 foam pad |
| Outlet | Adjustable directional nozzle |
| Aeration | Venturi valve |
| Mounting | 3 suction cups |
| Water type | Freshwater and saltwater |
| Use | Indoor; fully submerged |
| Max water temp | 35 °C |
| Pack size | 1 complete filter |
Frequently asked questions
Does U1 include BIOMAX or carbon cartridges?
The standard U1 medium is one foam pad. The separate three-media arrangement with BIOMAX and Poly/Carbon cartridges belongs to U2, U3 and U4.
What size aquarium is it intended for?
Fluval gives a guide of up to 55 litres. Take account of livestock, feeding, aquarium layout and maintenance rather than choosing solely by the maximum flow figure.
Does it have three-way water output?
U1 has an adjustable directional outlet. It does not use the three-way top, integrated spray-bar and bottom output arrangement of U2–U4.
How should it sit in the water?
Keep the filter fully immersed, with the top outlet at least 1 cm below the surface. The venturi air valve must be above the water if aeration is being used.
Which replacement foam fits?
Choose Fluval U1 foam A485. Do not substitute the different U2, U3 or U4 foam simply because it belongs to the same series.
How should I clean the foam?
After disconnecting aquarium appliances, rinse established foam in water removed from the aquarium. Avoid soap, detergents and tap-water rinsing of established media; follow the supplied maintenance instructions.
What comes in the U1 kit?
One U1 filter with its foam pad, directional outlet, venturi valve and three suction cups. It is an indoor underwater filter and must never be run dry.
More aquarium equipment
Explore our aquarium filter media range when planning routine replacements, or browse our full aquarium equipment range.




Reviews
There are no reviews yet.