Interpet PF3 Internal Aquarium Filter
| Brand | |
|---|---|
| Model | PF3 |
| Filter type | Internal aquarium filter |
| Max. water flow | 800 L/h |
| Aquarium guide | Up to 126 L (illustrated packaging guide) |
| Water type | Coldwater and tropical aquariums |
| Flow adjustment | Adjustable |
| Direction control | Flow deflector |
| Venturi | Fitted; air inlet above water surface |
| AquaValve | Fitted |
| Filter media | Plain foam and carbon/fine-floss media; ceramic biomedia assembly |
| Mounting | Bracket and suckers |
| Supplied unit | One complete filter |
| Maker article | 2203 |
Interpet PF3 internal filter for coldwater and tropical aquariums, with a maximum 800 L/h water flow. Adjustable flow and direction, venturi and AquaValve. Supplied as one complete filter with media, mounting bracket and suckers.
£51.44 (inc VAT)
The Interpet PF3 is an internal power filter for coldwater and tropical aquariums, with a maximum water flow of 800 L/h. Its filter media and pump form one unit inside the aquarium, with adjustable water flow and outlet direction.
Choosing the right PF model
Interpet’s illustrated PF3 packaging gives an aquarium guide of up to 126 litres. Treat this as selection guidance rather than a guarantee for every stocking level: fish, feeding and maintenance all affect the filtration needed.
The PF3 provides a higher maximum output than the 500 L/h PF2, while the PF4 increases the figure to 1000 L/h. These are water-flow figures rather than tank-volume ratings. Choose for the aquarium’s actual volume, inhabitants, feeding and circulation requirements, with room to position and service the filter.
The PF3 shares the PF1–PF4 flow-control, venturi and AquaValve arrangement. The smaller PF Mini uses a different direction-only arrangement. Compare these functional differences alongside the water-flow figures when considering alternatives in the PF family.
Flow and filtration
The adjustable flow and directional outlet let you aim the returning stream to suit the layout. Its venturi introduces air when the inlet is above the water surface. The AquaValve helps prevent dirty filter water draining back into the aquarium during removal; disconnect the power before taking the filter out or opening it.
What is included
One complete PF3 filter is supplied with a mounting bracket and suckers. The internal arrangement combines plain foam, carbon/fine-floss media and ceramic biomedia. This is the filter’s working assembly, not an extra set of refill packs. When replacing consumables, match PF3 and the manufacturer part number instead of choosing a pad solely because it looks similar.
Installation and ongoing care
Fit the deflector, attach the suckers to the cradle and clip the filter into place as shown in its instructions. Switch on after the aquarium is filled, and arrange a drip loop so water cannot run along the cable towards the socket. Keep the outlet and intake clear of decorations that could obstruct circulation or make servicing awkward.
Isolate the power before maintenance. Rinse reusable foam and ceramic media, where fitted, in water removed from the aquarium. Follow the model’s instructions for carbon/fine-floss replacement, and check the intake, media and impeller if the water flow falls. Worn or deformed foam needs attention; replacing a consumable does not mean replacing the whole filter.
Keep the filter accessible so routine checks are easy. Match the PF3 fine-floss and carbon refill 3535 to this model; replacement refills are sold separately. For more equipment and water-care choices, browse our aquarium range.
Technical details
| Specification | Details |
|---|---|
| Brand | Interpet |
| Model | PF3 |
| Filter type | Internal aquarium filter |
| Max. water flow | 800 L/h |
| Aquarium guide | Up to 126 L (illustrated packaging guide) |
| Water type | Coldwater and tropical aquariums |
| Flow adjustment | Adjustable |
| Direction control | Flow deflector |
| Venturi | Fitted; air inlet above water surface |
| AquaValve | Fitted |
| Filter media | Plain foam and carbon/fine-floss media; ceramic biomedia assembly |
| Mounting | Bracket and suckers |
| Supplied unit | One complete filter |
| Maker article | 2203 |
Representative packaging photograph.
Frequently asked questions
What is supplied with the PF3?
One complete PF3 filter with its filter-media assembly, mounting bracket and suckers is supplied. The installation arrangement includes a flow deflector. Separate refill multipacks are not extra contents.
Does 800 L/h mean an 800 litre aquarium?
No. It is the maximum water-flow figure per hour, not a tank-volume rating. Choose for the aquarium’s actual volume, livestock, feeding and appropriate circulation.
Can I adjust the water flow?
The PF3 has adjustable water flow and outlet direction. Set the return to suit the aquarium and its inhabitants, following the model’s instructions.
Does this model have a venturi?
Yes. The venturi draws air into the returning stream when its inlet is above the water surface. It is part of the filter arrangement, not a separately supplied air pump.
How should I clean the media?
Disconnect the power first. Clean reusable foam and ceramic media, where fitted, in removed aquarium water. Follow the supplied instructions for carbon/fine-floss replacement and impeller care.
Which fine-floss and carbon refill matches it?
Interpet PF3 fine-floss and carbon refill 3535 is the model-matched replacement. Refills are separate purchases; a spare multipack is not additional filter-box contents.
How is the filter mounted?
Attach the suckers to its cradle and clip the PF3 onto the cradle. Follow the supplied setup instructions and fill the aquarium before switching on. Make a drip loop in the electrical cable.



Reviews
There are no reviews yet.