Interpet PF2 Internal Aquarium Filter
| Brand | |
|---|---|
| Model | PF2 |
| Filter type | Internal aquarium filter |
| Max. water flow | 500 L/h |
| Aquarium guide | Up to 81 L (illustrated packaging guide) |
| Power | 9 W |
| Water type | Coldwater and tropical aquariums |
| Flow adjustment | Adjustable |
| Direction control | Flow deflector |
| Venturi | Fitted; air inlet above water surface |
| AquaValve | Fitted |
| Filter media | Plain foam and carbon/fine-floss media; ceramic biomedia assembly |
| Mounting | Bracket and suckers |
| Supplied unit | One complete filter |
| Maker article | 2202 |
Interpet PF2 internal filter for coldwater and tropical aquariums, with a maximum 500 L/h water flow. Adjustable flow and direction, venturi and AquaValve. Supplied as one complete filter with media, mounting bracket and suckers.
£50.00 (inc VAT)
The Interpet PF2 internal power filter combines mechanical filter media, carbon/fine-floss media and a ceramic biomedia assembly with a pump rated at a maximum 500 L/h water flow. It is designed for installation inside a coldwater or tropical aquarium.
Choosing the right PF model
Interpet’s illustrated PF2 packaging gives an aquarium guide of up to 81 litres. Treat this as selection guidance rather than a guarantee for every stocking level: fish, feeding and maintenance all affect the filtration needed.
The PF2 provides a step up from the 380 L/h PF1 while retaining adjustable flow and direction. Maximum flow is the pump’s water output per hour, not a statement that it can filter a 500 litre tank. Consider actual aquarium volume, fish, feeding and the way water circulates around the layout when choosing this model.
The PF2’s 500 L/h maximum output falls between PF1 at 380 L/h and PF3 at 800 L/h. Consider both the required circulation and the available space for installation; a higher flow figure does not replace sensible stocking or regular water care.
Flow and filtration
Use the flow control and deflector to set the returning stream. The venturi draws air into the flow only when its inlet is above the water surface; a submerged air inlet will not operate in the same way. The AquaValve helps retain dirty water when the filter is lifted out for maintenance, with the power isolated first.
What is included
The supplied unit is one complete PF2 filter with its mounting bracket and suckers. Its internal media arrangement includes plain foam, carbon/fine-floss media and ceramic biomedia. A separately sold refill multipack is not an additional item in the box. The PF2 takes its own model-specific replacements, so matching the code is more reliable than judging pad size from a photograph.
Installation and ongoing care
Attach the suckers to the cradle, fit the deflector and clip the filter into its mounting arrangement. Set up in the filled aquarium according to the supplied instructions and make a drip loop in the electrical cable. Leave access for removing the filter and servicing the media without having to disturb the whole aquascape.
Isolate the power before maintenance. Rinse reusable foam and ceramic media, where fitted, in water removed from the aquarium. Follow the model’s instructions for carbon/fine-floss replacement, and check the intake, media and impeller if the water flow falls. Worn or deformed foam needs attention; replacing a consumable does not mean replacing the whole filter.
Keep the filter accessible so routine checks are easy. Match the PF2 fine-floss and carbon refill 3534 to this model; replacement refills are sold separately. For more equipment and water-care choices, browse our aquarium range.
Technical details
| Specification | Details |
|---|---|
| Brand | Interpet |
| Model | PF2 |
| Filter type | Internal aquarium filter |
| Max. water flow | 500 L/h |
| Aquarium guide | Up to 81 L (illustrated packaging guide) |
| Power | 9 W |
| Water type | Coldwater and tropical aquariums |
| Flow adjustment | Adjustable |
| Direction control | Flow deflector |
| Venturi | Fitted; air inlet above water surface |
| AquaValve | Fitted |
| Filter media | Plain foam and carbon/fine-floss media; ceramic biomedia assembly |
| Mounting | Bracket and suckers |
| Supplied unit | One complete filter |
| Maker article | 2202 |
Representative packaging photograph.
Frequently asked questions
What is supplied with the PF2?
One complete PF2 filter with its filter-media assembly, mounting bracket and suckers is supplied. The installation arrangement includes a flow deflector. Separate refill multipacks are not extra contents.
Does 500 L/h mean a 500 litre aquarium?
No. It is the maximum water-flow figure per hour, not a tank-volume rating. Choose for the aquarium’s actual volume, livestock, feeding and appropriate circulation.
Can I adjust the water flow?
The PF2 has adjustable water flow and outlet direction. Set the return to suit the aquarium and its inhabitants, following the model’s instructions.
Does this model have a venturi?
Yes. The venturi draws air into the returning stream when its inlet is above the water surface. It is part of the filter arrangement, not a separately supplied air pump.
How should I clean the media?
Disconnect the power first. Clean reusable foam and ceramic media, where fitted, in removed aquarium water. Follow the supplied instructions for carbon/fine-floss replacement and impeller care.
Which fine-floss and carbon refill matches it?
Interpet PF2 fine-floss and carbon refill 3534 is the model-matched replacement. Refills are separate purchases; a spare multipack is not additional filter-box contents.
How is the filter mounted?
Attach the suckers to its cradle and clip the PF2 onto the cradle. Follow the supplied setup instructions and fill the aquarium before switching on. Make a drip loop in the electrical cable.



Reviews
There are no reviews yet.