Interpet PF1 Internal Aquarium Filter

SKU: IP2201
GTIN: 755349022014
Brand

Model

PF1

Filter type

Internal aquarium filter

Max. water flow

380 L/h

Aquarium guide

Up to 68 L (illustrated packaging guide)

Power

7 W

Water type

Coldwater and tropical aquariums

Flow adjustment

Adjustable

Direction control

Flow deflector

Venturi

Fitted; air inlet above water surface

AquaValve

Fitted

Filter media

Plain foam and carbon/fine-floss media

Mounting

Bracket and suckers

Supplied unit

One complete filter

Maker article

2201

Interpet PF1 internal filter for coldwater and tropical aquariums, with a maximum 380 L/h water flow. Adjustable flow and direction, venturi and AquaValve. Supplied as one complete filter with media, mounting bracket and suckers.

£27.11 (inc VAT)

The Interpet PF1 internal power filter provides a maximum water flow of 380 L/h, with adjustable flow and return direction. It mounts inside a coldwater or tropical aquarium and keeps its filtration media within the same unit as the pump.

Choosing the right PF model

Interpet’s illustrated PF1 packaging gives an aquarium guide of up to 68 litres. Treat this as selection guidance rather than a guarantee for every stocking level: fish, feeding and maintenance all affect the filtration needed.

The PF1 is the first model above the Mini in the PF range and adds controls that the Mini does not have. Its 380 L/h figure is a circulation output, not a 380 litre aquarium rating. Match the filter to the actual water volume, livestock and feeding load, and consider where the returning water will travel through the tank.

The PF1 sits between the 200 L/h Mini and 500 L/h PF2. The Mini changes outlet direction without PF1’s flow-control, venturi and AquaValve arrangement; moving up the range should follow the needs of the aquarium, not simply the largest number available.

Flow and filtration

Adjust the flow and outlet direction to suit the aquarium. The venturi can introduce air into the returning stream when its inlet is above the water surface; it is not an independent air pump. The AquaValve helps keep dirty filter water from draining back when the filter is removed for cleaning. Always isolate power before opening or removing the unit.

What is included

One complete PF1 filter is supplied with its mounting bracket and suckers. The filtration assembly uses plain foam and carbon/fine-floss media. These are the working media inside the filter, not an extra three-pack of replacement pads. Match subsequent refills to PF1 rather than buying by the appearance of a similar PF housing.

Installation and ongoing care

Fit the flow deflector and attach the suckers to the cradle, then clip the filter into position as directed in its instructions. Switch on only after the aquarium is filled. Make a drip loop in the cable and arrange the filter so the outlet provides appropriate circulation while the venturi inlet remains above the surface if you want it to draw air.

Isolate the power before maintenance. Rinse the reusable PF1 foam in water removed from the aquarium. Follow the model’s instructions for carbon/fine-floss replacement, and check the intake, media and impeller if the water flow falls. Worn or deformed foam needs attention; replacing a consumable does not mean replacing the whole filter.

Keep the filter accessible so routine checks are easy. Match the PF1 fine-floss and carbon refill 3533 to this model; replacement refills are sold separately. For more equipment and water-care choices, browse our aquarium range.

Technical details

Specification Details
Brand Interpet
Model PF1
Filter type Internal aquarium filter
Max. water flow 380 L/h
Aquarium guide Up to 68 L (illustrated packaging guide)
Power 7 W
Water type Coldwater and tropical aquariums
Flow adjustment Adjustable
Direction control Flow deflector
Venturi Fitted; air inlet above water surface
AquaValve Fitted
Filter media Plain foam and carbon/fine-floss media
Mounting Bracket and suckers
Supplied unit One complete filter
Maker article 2201

Representative packaging photograph.

Frequently asked questions

What is supplied with the PF1?

One complete PF1 filter with its filter-media assembly, mounting bracket and suckers is supplied. The installation arrangement includes a flow deflector. Separate refill multipacks are not extra contents.

Does 380 L/h mean a 380 litre aquarium?

No. It is the maximum water-flow figure per hour, not a tank-volume rating. Choose for the aquarium’s actual volume, livestock, feeding and appropriate circulation.

Can I adjust the water flow?

The PF1 has adjustable water flow and outlet direction. Set the return to suit the aquarium and its inhabitants, following the model’s instructions.

Does this model have a venturi?

Yes. The venturi draws air into the returning stream when its inlet is above the water surface. It is part of the filter arrangement, not a separately supplied air pump.

How should I clean the media?

Disconnect the power first. Clean the reusable PF1 foam in removed aquarium water. Follow the supplied instructions for carbon/fine-floss replacement and impeller care.

Which fine-floss and carbon refill matches it?

Interpet PF1 fine-floss and carbon refill 3533 is the model-matched replacement. Refills are separate purchases; a spare multipack is not additional filter-box contents.

How is the filter mounted?

Attach the suckers to its cradle and clip the PF1 onto the cradle. Follow the supplied setup instructions and fill the aquarium before switching on. Make a drip loop in the electrical cable.

Interpet PF1 Internal Aquarium Filter Reviews

Reviews

There are no reviews yet.

Be the first to review “Interpet PF1 Internal Aquarium Filter”