Fluval Rubber Hose Connectors for FX2/FX4/FX5/FX6, 2 Pack (A20228)

SKU: HA20228
GTIN: 015561302289
Brand

Manufacturer article

A20228

Spare type

Rubber connector

Compatible filters

Fluval FX2, FX4, FX5 and FX6

Pack contents

2 rubber connectors

Material

Rubber

Hosing and valves

Not included

Complete filter

Not included

Fluval A20228 replacement rubber connectors, one pack of two, for FX2, FX4, FX5 and FX6. Select the exact part and position from the filter diagram. Hosing, valves, clamps and complete filters are separate items.

£6.70 (inc VAT)

Fluval A20228 is a two-pack of replacement rubber connectors for FX2, FX4, FX5 and FX6 canister-filter assemblies. Match this exact article to the connector position shown in your filter’s parts diagram. One retail pack supplies two connectors; it is not a complete hose or valve kit.

Choose the model-specific connector

A20228 is suitable for Fluval FX2, FX4, FX5 and FX6 filters. Select by A20228 and the filter model rather than by a guessed hose diameter or the shape of a loose connector.

Fluval’s FX maintenance guidance discusses the intake rubber connector at the siphon tube, including checking its condition and keeping that intake joint below the water surface. Follow the arrangement for your own filter when selecting and fitting the connector.

What this two-pack contains

One retail pack contains two replacement rubber connectors. Ribbed hosing, AquaStop valves, clamps, intake and output assemblies, and the complete filter are separate items. If more than one part is needed, identify each by the correct FX parts diagram rather than assuming this pack is a connection kit.

Inspect during routine servicing

Fluval advises checking the intake connector’s condition because it can harden and lose flexibility over time. It also recommends cleaning the hosing and rubber connectors as part of normal maintenance. Follow the equipment instructions when deciding whether a connector needs replacement.

The state of a connector is one part of checking the intake arrangement. If air is entering a system, inspect the complete setup as directed by the manufacturer rather than assuming a replacement connector alone will resolve every cause.

Safe fitting and reassembly

Disconnect the filter from the electricity supply before removing or fitting components or cleaning it. Follow your filter’s shut-down and hose-handling procedure, retaining the correct intake and output arrangement when reassembling.

Check the connection position and the route of the hosing against the filter manual before restarting. The two-connector count describes the retail contents; it does not specify a universal hose size or prove compatibility with another brand of filter.

Technical details

Specification Details
Article A20228
Compatible filters Fluval FX2 / FX4 / FX5 / FX6
Pack contents 2 replacement connectors
Material Rubber
Selection Exact part number and filter diagram
Hosing, valves and clamps included No

For an FX2, FX4, FX5 or FX6 hose replacement, see the separately sold Fluval A20236 4 m ribbed hosing. This connector pack contains two connectors; the hosing is a separate purchase.

Browse our aquarium supplies for the wider aquarium range.

Photograph: Two replacement rubber connectors are supplied. Hosing, valves and clamps are sold separately.

Questions about this spare

Which FX filters is this article listed for?

Fluval lists rubber connector article A20228 for FX2, FX4, FX5 and FX6 filters.

How many connectors are supplied?

One retail pack contains two replacement rubber connectors.

Does the pack include hosing or valves?

No. This is the two-connector spare pack. Hosing, valves, clamps and intake or output assemblies are separate purchases.

How do I choose the correct connector position?

Match A20228 to the diagram and instructions for your own FX filter. Use the article and model rather than assuming a fit from a hose diameter.

What should I inspect during maintenance?

Fluval’s FX guidance says to check the intake rubber connector for hardening and loss of flexibility, and to clean hosing and connectors during normal maintenance.

What does Fluval say about the intake connection?

Its FX guidance says the joint between the intake rubber connector and the intake siphon tube should be below the water surface. Follow the setup instructions for the exact filter.

What should I do before replacing a connector?

Disconnect the filter from the electricity supply and follow its shut-down, hose-handling and reassembly instructions before returning it to service.

Fluval Rubber Hose Connectors for FX2/FX4/FX5/FX6, 2 Pack (A20228) Reviews

Reviews

There are no reviews yet.

Be the first to review “Fluval Rubber Hose Connectors for FX2/FX4/FX5/FX6, 2 Pack (A20228)”