Fluval Ribbed Hosing for FX2/FX4/FX5/FX6, 4 m (A20236)

SKU: HA20236
GTIN: 015561302364
Brand

Manufacturer article

A20236

Spare type

Ribbed hosing

Compatible filters

Fluval FX2, FX4, FX5 and FX6

Supplied length

4 m

Selling unit

One replacement hose length

Hose profile

Ribbed

Complete filter

Not included

Fluval A20236 ribbed hosing, one 4 m replacement length, for FX2, FX4, FX5 and FX6 canister filters. Hosing only; valves, clamps and complete filters are separate. Match the exact model and follow its routing instructions.

£22.40 (inc VAT)

Fluval A20236 is replacement ribbed hosing supplied as one 4 m length for FX2, FX4, FX5 and FX6 canister filters. It is the model-specific hose article, supplied separately from valves, clamps and rim assemblies. Choose it by the exact filter and part number when renewing a hose run.

Match the hose to the FX filter

A20236 is the 4 m replacement hose for Fluval FX2, FX4, FX5 and FX6 filters. This compatibility is specific to A20236; the smaller hosing articles used on other Fluval canisters should be selected separately.

Match the part number rather than borrowing a diameter from a different hose listing. Plan the route between the aquarium and the filter using the installation limits and arrangement specified for your own model.

One 4 m replacement length

One retail article supplies a 4 m length of ribbed hosing. It is not two separate 4 m lengths and does not include a complete filter or a full set of valves, clamps and fittings. Check which existing connection parts can be used according to the filter instructions, and order any additional parts separately.

Use the model’s installation instructions when measuring the route and determining the required hose sections. Allow for the filter’s actual position and the specified aquarium-rim arrangement instead of assuming that every installation needs the same cut lengths.

Routing and maintenance

Keep the hose route consistent with the filter manual and avoid kinks or unnecessary loops. Fluval recommends cleaning canister hosing as part of normal maintenance. Follow the procedure for your filter, including its shut-down and reassembly instructions, rather than applying an unsupported cleaning chemical or fixed replacement timetable.

Disconnect the equipment from the electricity supply before removing or fitting parts or cleaning. Check the hose and connection arrangement against the manual before restarting the filter.

Adding other equipment

Fluval’s canister-filter FAQ advises against connecting an inline heater because the ribbed flexible hosing is not ideal for that installation. If you are changing the equipment arrangement, follow the manufacturer’s compatibility guidance rather than assuming that any inline accessory can be added to this hose.

The supplied length is a replacement-part quantity. It does not establish an aquarium capacity, a guaranteed flow increase or compatibility with a different filter’s fittings.

Technical details

Specification Details
Article A20236
Compatible filters Fluval FX2 / FX4 / FX5 / FX6
Supplied length 4 m
Selling unit One replacement hose length
Hose profile Ribbed
Valves, clamps and complete filter included No

When replacing the connecting rubber parts on an FX2, FX4, FX5 or FX6, see the separately sold Fluval A20228 rubber connectors, two per pack. Check the filter diagram and replace only the parts needed; connectors are a separate purchase from this 4 m hose.

Browse our aquarium supplies for the wider aquarium range.

Photograph: Representative packaging photograph. This listing supplies one 4 m length of A20236 ribbed hosing; valves and clamps are sold separately.

Questions about this spare

Which filters is A20236 listed for?

Fluval lists ribbed hose article A20236 for FX2, FX4, FX5 and FX6 filters.

What length is supplied?

One retail article supplies one 4 m length of replacement ribbed hosing.

Are two 4 m lengths supplied?

No. The stated retail quantity is one 4 m hose length, not two lengths of 4 m each.

Does it include valves or a complete connection kit?

No. Valves, clamps, rim assemblies and the complete filter are separate items. Match any additional parts using the exact model’s parts list.

How should I choose the hose sections for my setup?

Measure the route and follow the installation instructions for your own filter when determining the required sections and aquarium-rim arrangement.

Can I connect an inline heater to this hosing?

Fluval’s canister-filter FAQ advises against this because ribbed flexible hosing is not ideal for installing an inline heater. Follow the manufacturer’s equipment compatibility guidance.

How should I maintain the hosing?

Fluval recommends cleaning canister hosing during normal maintenance. Disconnect the equipment from the electricity supply before work and follow the filter’s procedure and routing instructions.

Fluval Ribbed Hosing for FX2/FX4/FX5/FX6, 4 m (A20236) Reviews

Reviews

There are no reviews yet.

Be the first to review “Fluval Ribbed Hosing for FX2/FX4/FX5/FX6, 4 m (A20236)”