Fluval 206 Motor Head Maintenance Kit (A20091)

SKU: HA20091
GTIN: 015561300919
Brand

Filter series

06 Series

Compatible filter

Fluval 206 canister filter

Manufacturer article

A20091

Selling unit

One retail kit

Impeller

Magnetic impeller

Shaft and support

Ceramic shaft and rubber support

Other included parts

Impeller cover and gasket

Electrical motor head

Not included

Filter media

Not included

Genuine Fluval A20091 motor head maintenance kit for the 206 external canister filter. Supplied as one retail kit with magnetic impeller, ceramic shaft and rubber support, impeller cover and gasket. Check your exact filter model before ordering.

£29.73 (inc VAT)

The Fluval 206 Motor Head Maintenance Kit A20091 brings together the listed impeller and sealing components for servicing a Fluval 206 external canister filter. The selling unit is one complete retail kit for that model.

Choose the exact 06 model

Use the A20091 reference when matching this pack to your existing 206. The neighbouring 106 and 306 filters have different complete kit references, so check the label on the filter before choosing replacement parts.

The four 06 models have their own kit references: A20090 for 106, A20091 for 206, A20092 for 306 and A20093 for 406. Match both the filter model and the complete kit reference before ordering. Similar model numbers or a familiar-looking loose part are not a sound way to choose the full pack.

What this maintenance kit supplies

The kit brings together a magnetic impeller, ceramic shaft and rubber support, impeller cover and gasket. These are maintenance components for the existing motor head. The electrical motor head, filter canister and filtration media are separate items; choose a complete motor head only if that is the part your filter actually requires.

A kit is useful when the matching impeller and sealing components are being renewed together. If you have identified a different fault, check the relevant spare in the filter’s parts list before buying. A motor maintenance kit should be selected for the parts it contains rather than as a general cure for every restart, flow or leakage problem.

Check before replacing parts

For a filter that is difficult to restart after cleaning, Fluval recommends checking whether the impeller and shaft are dirty or damaged, whether the cover has been refitted correctly and whether the filter is properly primed. Those checks help distinguish routine cleaning and refitting from a worn component that needs replacement. Air trapped after servicing can also cause noise, so confirm correct priming before deciding that a new part is needed.

Care and refitting

Disconnect aquarium appliances from the electricity supply before putting hands in water or removing and fitting parts. Follow the 06 manual for draining and opening the filter. Handle the ceramic shaft gently, keep its rubber support seated and rinse a dirty impeller with clean water.

Refit the impeller cover in the correct orientation and secure it properly. Follow the filter’s reassembly and priming instructions, allowing the canister to fill completely before restoring power; never run it dry. Keep impeller servicing separate from the individual cleaning and replacement instructions for your filter media.

For servicing the impeller well, a suitable Fluval cleaning brush is a useful separate tool. Follow the manufacturer’s gasket-care instructions when choosing lubricant. You can also browse the Aquarium range while planning the rest of your filter maintenance.

Technical details

Specification Details
Brand Fluval
Filter series 06 Series
Compatible filter Fluval 206 canister filter
Manufacturer article A20091
Selling unit One retail kit
Impeller Magnetic impeller
Shaft and support Ceramic shaft and rubber support
Other included parts Impeller cover and gasket
Electrical motor head Not included
Filter media Not included

Photograph: Representative component photograph. This listing is for one Fluval 206 motor head maintenance kit A20091. The complete filter and motor head are not included.

Questions about this kit

Which filter is the A20091 kit for?

Fluval lists A20091 for the 206 external canister filter in the 06 Series. Check the model label and complete kit reference before ordering.

What is supplied in this kit?

One retail maintenance kit containing the magnetic impeller, ceramic shaft and rubber support, impeller cover and gasket. Select the model-specific pack listed for your filter.

Does it include the complete electrical motor head?

The pack contains the listed maintenance components for servicing the existing head. The electrical motor head, canister and filter media are separate items.

Will a maintenance kit solve a difficult restart?

Check the impeller and shaft for dirt or damage, make sure the cover is fitted correctly and confirm proper priming first. Choose replacement parts once the cause has been identified; a new kit is not a guarantee against every possible fault.

How should I handle the ceramic shaft?

Handle it gently because ceramic can be fragile. During impeller servicing, keep the rubber support seated and follow the 06 manual when removing or refitting the assembly.

Is this the same kit as one for another filter generation?

This listing is for A20091, the kit specified for the Fluval 206. For another model or series, use its own manufacturer-specified parts rather than assuming that the complete kits interchange.

What should I check before switching the filter back on?

Disconnect aquarium appliances before servicing. Refit the impeller cover correctly, follow the reassembly and priming instructions and let the canister fill completely before restoring power. Never run the filter dry.

Fluval 206 Motor Head Maintenance Kit (A20091) Reviews

Reviews

There are no reviews yet.

Be the first to review “Fluval 206 Motor Head Maintenance Kit (A20091)”