Fluval 306 Motor Head Maintenance Kit (A20092)
| Brand | |
|---|---|
| Filter series | 06 Series |
| Compatible filter | Fluval 306 canister filter |
| Manufacturer article | A20092 |
| Selling unit | One retail kit |
| Impeller | Magnetic impeller |
| Shaft and support | Ceramic shaft and rubber support |
| Other included parts | Impeller cover and gasket |
| Electrical motor head | Not included |
| Filter media | Not included |
Genuine Fluval A20092 motor head maintenance kit for the 306 external canister filter. Supplied as one retail kit with magnetic impeller, ceramic shaft and rubber support, impeller cover and gasket. Check your exact filter model before ordering.
£32.36 (inc VAT)
The Fluval 306 Motor Head Maintenance Kit A20092 is the matching retail kit for the impeller and sealing components listed for a Fluval 306 external canister filter. One kit is supplied for maintenance of the existing filter.
Choose the exact 06 model
A20092 is the reference to check for a 306. Keep that full reference with your filter’s maintenance records so a later parts order is matched to the same model, especially if you also use a 206 or 406.
The four 06 models have their own kit references: A20090 for 106, A20091 for 206, A20092 for 306 and A20093 for 406. Match both the filter model and the complete kit reference before ordering. Similar model numbers or a familiar-looking loose part are not a sound way to choose the full pack.
What this maintenance kit supplies
The kit brings together a magnetic impeller, ceramic shaft and rubber support, impeller cover and gasket. These are maintenance components for the existing motor head. The electrical motor head, filter canister and filtration media are separate items; choose a complete motor head only if that is the part your filter actually requires.
A kit is useful when the matching impeller and sealing components are being renewed together. If you have identified a different fault, check the relevant spare in the filter’s parts list before buying. A motor maintenance kit should be selected for the parts it contains rather than as a general cure for every restart, flow or leakage problem.
Check before replacing parts
For a filter that is difficult to restart after cleaning, Fluval recommends checking whether the impeller and shaft are dirty or damaged, whether the cover has been refitted correctly and whether the filter is properly primed. Those checks help distinguish routine cleaning and refitting from a worn component that needs replacement. Air trapped after servicing can also cause noise, so confirm correct priming before deciding that a new part is needed.
Care and refitting
Disconnect aquarium appliances from the electricity supply before putting hands in water or removing and fitting parts. Follow the 06 manual for draining and opening the filter. Handle the ceramic shaft gently, keep its rubber support seated and rinse a dirty impeller with clean water.
Refit the impeller cover in the correct orientation and secure it properly. Follow the filter’s reassembly and priming instructions, allowing the canister to fill completely before restoring power; never run it dry. Keep impeller servicing separate from the individual cleaning and replacement instructions for your filter media.
For servicing the impeller well, a suitable Fluval cleaning brush is a useful separate tool. Follow the manufacturer’s gasket-care instructions when choosing lubricant. You can also browse the Aquarium range while planning the rest of your filter maintenance.
Technical details
| Specification | Details |
|---|---|
| Brand | Fluval |
| Filter series | 06 Series |
| Compatible filter | Fluval 306 canister filter |
| Manufacturer article | A20092 |
| Selling unit | One retail kit |
| Impeller | Magnetic impeller |
| Shaft and support | Ceramic shaft and rubber support |
| Other included parts | Impeller cover and gasket |
| Electrical motor head | Not included |
| Filter media | Not included |
Photograph: Representative component photograph. This listing is for one Fluval 306 motor head maintenance kit A20092. The complete filter and motor head are not included.
Questions about this kit
Which filter is the A20092 kit for?
Fluval lists A20092 for the 306 external canister filter in the 06 Series. Check the model label and complete kit reference before ordering.
What is supplied in this kit?
One retail maintenance kit containing the magnetic impeller, ceramic shaft and rubber support, impeller cover and gasket. Select the model-specific pack listed for your filter.
Does it include the complete electrical motor head?
The pack contains the listed maintenance components for servicing the existing head. The electrical motor head, canister and filter media are separate items.
Will a maintenance kit solve a difficult restart?
Check the impeller and shaft for dirt or damage, make sure the cover is fitted correctly and confirm proper priming first. Choose replacement parts once the cause has been identified; a new kit is not a guarantee against every possible fault.
How should I handle the ceramic shaft?
Handle it gently because ceramic can be fragile. During impeller servicing, keep the rubber support seated and follow the 06 manual when removing or refitting the assembly.
Is this the same kit as one for another filter generation?
This listing is for A20092, the kit specified for the Fluval 306. For another model or series, use its own manufacturer-specified parts rather than assuming that the complete kits interchange.
What should I check before switching the filter back on?
Disconnect aquarium appliances before servicing. Refit the impeller cover correctly, follow the reassembly and priming instructions and let the canister fill completely before restoring power. Never run the filter dry.




Reviews
There are no reviews yet.