Fluval Filter Lid O-Ring for FX4/FX5/FX6 (A20210)

SKU: HA20210
GTIN: 015561302104
Brand

Manufacturer article

A20210

Spare type

Filter lid O-ring

Compatible filters

Fluval FX4, FX5 and FX6

Pack contents

1 lid O-ring

Lubricant

Not included

Fitting position

Filter lid seal

Complete filter

Not included

One Fluval A20210 replacement filter lid O-ring for FX4, FX5 and FX6. The main lid seal is supplied separately from the lid, motor seal, click-fit O-rings and lubricant. Match the exact model and part position.

£13.15 (inc VAT)

Fluval A20210 is the replacement filter lid O-ring for FX4, FX5 and FX6 canister filters. One ring is supplied for the lid sealing position. Choose this exact article when servicing the lid seal, keeping it distinct from the motor seal and smaller click-fit connection seals.

Match the filter and sealing point

The maker lists A20210 for FX4/FX5/FX6. It is the main filter lid O-ring, not a complete set of every seal used by an FX filter. Matching the article to the lid position helps avoid ordering a motor seal or a smaller connection O-ring with a similar name.

The current FX2 parts list specifies A20213 for its filter lid, while A20212 identifies separate top-cover click-fit O-rings. Use the model and the exact part description in the filter’s parts diagram when choosing the replacement.

Contents of the retail article

One retail article contains one replacement A20210 lid O-ring. The lid, lid fasteners, motor seals, connection seals, lubricant and complete canister filter are separate purchases. Select any other parts needed for the service individually by the filter’s parts list.

Service preparation and care

Disconnect the equipment from the electricity supply before removing or fitting parts or cleaning the filter. Follow the shut-down, drainage, lid-removal and reassembly procedure in the manual for your own filter. Check the seal is in its intended position before returning the filter to use.

Fluval’s FX guidance recommends silicone lubricant for its rubber seals and advises against petroleum jelly or vegetable oil. Use the product and method specified in the filter instructions rather than treating an arbitrary household lubricant as suitable.

Plan a complete inspection

Use the lid service to check the relevant sealing surfaces and other parts as directed by the manufacturer. Replacing the lid O-ring is a specific part replacement, not a promise to resolve an issue arising at another connection or component.

Keeping a record of article A20210 alongside the FX4, FX5 or FX6 model makes future parts selection clearer. Choose a motor seal or a click-fit seal separately if that is the position requiring attention.

Technical details

Specification Details
Article A20210
Compatible filters Fluval FX4 / FX5 / FX6
Part type Main filter lid O-ring
Pack contents 1 replacement ring
Lid and other seals included No
Lubricant included No

For the motor sealing position on an FX5 or FX6, see the separately sold Fluval A20207 motor seal ring. Select the seal for the correct model and service position; the motor seal is a separate purchase from this lid O-ring.

Browse our aquarium supplies for the wider aquarium range.

Photograph: Representative seal ring photograph. This listing supplies one A20210 filter lid O-ring for Fluval FX4, FX5 and FX6 filters.

Questions about this spare

Which filters use this lid O-ring?

Fluval lists A20210 for the FX4, FX5 and FX6 canister filters.

What is included?

One replacement filter lid O-ring. The lid, other seals and complete filter are separate items.

Is this the motor seal ring?

No. This article is the filter lid O-ring. Choose the motor seal separately using the exact filter model and parts list.

Is this the FX2 lid seal?

The current FX2 manufacturer parts list specifies A20213 for its lid O-ring. This A20210 listing follows the explicit FX4/FX5/FX6 fit.

Are click-fit connection seals included?

No. A20212 top-cover click-fit O-rings are separately named parts, rather than part of this single lid-ring purchase.

How should I prepare for fitting?

Disconnect the filter from the electricity supply and follow its own manual’s drainage, lid-removal and reassembly instructions.

Which lubricant should I use?

Follow the filter’s instructions. Fluval’s FX guidance recommends silicone lubricant and advises against petroleum jelly or vegetable oil; lubricant is purchased separately.

Fluval Filter Lid O-Ring for FX4/FX5/FX6 (A20210) Reviews

Reviews

There are no reviews yet.

Be the first to review “Fluval Filter Lid O-Ring for FX4/FX5/FX6 (A20210)”