Aquascape Large Pondless Waterfall Half Centipede with End Cap

Aquascape Large Pondless Waterfall Half Centipede with End Cap

Aquascape AquaBlox® Water Storage Module displaces water for Pondless Waterfall and rainwater collection projects. AquaBlox are manufactured using recycled materials and designed to efficiently maximise water storage capacity, providing the ability to hold more water with a smaller reservoir footprint. Each AquaBlox will hold approximately 7.4 gallons of water per cubic foot, allowing over 3 times the water storage capacity than gravel will provide. This extra storage capacity will mean less time needed to top off the reservoir due to evaporation.

Using AquaBlox will also decrease the amount of labour, liner, and underlayment required during installation. The load-bearing top will support up to 5,472 pounds per square foot, providing years of trouble-free enjoyment and allowing for installation in a wide variety of situations. Aquascape AquaBlox are easier to clean, less prone to clogging, and come complete with the top, bottom, two sides and four structural supports.

Key features and benefits

• Ideal for use with Pondless® Waterfalls, rainwater harvesting systems, and other applications
• Makes installation quick, safe, and less expensive
• Supports up to 5,472 pounds per square foot

Verified technical information

Use the values for Aquascape part number 29238; related sizes and visually similar service parts may have different specifications.

Designing the reservoir and filtration zone

Calculate the water held in the stream or waterfall when the pump is running and make sure the underground reservoir can accept that drawdown when the system stops. Allow for structural loading, clean-out access, pump servicing and a stable finished water level before covering the installation with stone.

Our practical advice: If you are unsure about sizing or compatibility, send us the Aquascape part numbers you already have and a photograph or sketch of the installation. We will help check the combination before dispatch.

Plan the complete Aquascape system

Browse Aquascape Pondless & Wetland Filtration, Aquascape Pond Filtration and complete Aquascape range for the pumps, filtration, reservoirs, liner, plumbing, lighting, treatments and service parts used around this product. Planning the connected components together makes installation and future maintenance much easier.

Related Aquascape products

These products are closely connected by range or installation role. Check the part number and stated compatibility on each page rather than substituting by appearance alone.

• Aquascape Pondless Waterfall Vault – a closely related Aquascape product.
• Aquascape Pondless Waterfall Vault Extension – a closely related Aquascape product.
• Aquascape Large Snorkel Vault and Cap – a closely related Aquascape product.
• Aquascape Large Snorkel Vault Extension – a closely related Aquascape product.