Aqua One Ocellaris 850 Impeller 137I
| Brand | |
|---|---|
| Compatibility | Ocellaris 850 / 850UVC |
Genuine Aqua One 137I / 25137I replacement impeller for Ocellaris 850 and 850UVC filters. Match the exact model and part code. Complete filter, motor head and filter media are separate.
£16.34 (inc VAT)
The genuine Aqua One 137I replacement impeller is the service part listed for Ocellaris 850 and 850UVC external aquarium filters. Its full manufacturer code is 25137I. Matching both that code and the filter’s model label helps you order the correct part rather than a visually similar impeller from another range.
A replacement for the correct filter
Choose this part when the impeller in a supported Ocellaris 850 model needs replacement. The 1400 and 3000 Ocellaris models have their own impeller codes, so a larger filter’s impeller should not be treated as an upgrade for the 850. A shared range name or a similar maximum flow figure does not establish compatibility.
The impeller is a service component within the filter head. This listing is for the replacement article, rather than a complete motor head or filter. It is useful when the rest of the correct filter can remain in service and the impeller is the component that requires attention.
Technical overview
| Feature | Specification |
|---|---|
| Brand and range | Aqua One Ocellaris |
| Replacement part | 137I impeller |
| Manufacturer code | 25137I |
| Compatible models | 850 / 850UVC |
| Retail unit | One replacement impeller article |
| Complete filter or motor head | Not included |
Check the cause before replacing parts
Lower flow does not automatically mean a failed impeller. Aqua One’s troubleshooting guidance also calls for checking the media, inlet, outlet and tubing. Debris, restricted hoses or maintenance issues can affect circulation. Follow the filter’s own checks so that the part you order addresses the actual problem.
Maintenance and fitting
Disconnect the filter before opening it and follow the model instructions for access, reassembly and restarting. The manufacturer describes cleaning debris from the impeller chamber and shaft, checking the end support and confirming free rotation. Inspect worn or damaged components rather than forcing them into position.
Keep the replacement code with your maintenance records. It makes subsequent spare-part orders easier and helps distinguish the impeller from wool pads, sponge media and UV components, which serve different purposes.
What is included?
One genuine Aqua One 137I replacement impeller article for the supported 850 models. The motor head, canister, taps, hoses, UV lamp and filter media are separate.
Related aquarium maintenance
If servicing the filter at the same time, identify its wool and sponge codes separately. These consumables are not included with the impeller. See our aquarium equipment range for related parts and equipment.
Frequently asked questions
Which filter uses the 137I impeller?
Aqua One lists 137I / 25137I for the Ocellaris 850 and 850UVC. Check the model label and part code before ordering; 1400 and 3000 models use different replacement codes.
Will this repair every noisy or slow filter?
No. Reduced flow or noise can have several causes. Inspect the media, inlet, outlet and hoses and follow the troubleshooting instructions before deciding that the impeller needs replacement.
Is this a complete motor or filter head?
This is the replacement impeller article. It does not include the motor head, canister, tap connector, hoses or a complete Ocellaris filter.
Does the UV version use the same code?
The current UK Aqua One table and the manufacturer’s 850/850UV instructions list 137I for both versions. This does not make it a replacement UV lamp or other electrical component.
Can I use an impeller with a similar appearance?
Order by the exact supported model and replacement code rather than colour or appearance. Similar-looking parts from another filter range are not confirmed alternatives.
What should I check during fitting?
Disconnect the filter and follow its instructions. Keep the impeller chamber clear of debris, inspect the shaft and end supports for damage, and make sure the assembly rotates freely before reassembly. Use the model’s priming and restart procedure.
Photograph: Representative 137I replacement impeller assembly for Ocellaris 850/850UVC.



Reviews
There are no reviews yet.