Aqua One Ocellaris 1400UV External Aquarium Filter
| Brand | |
|---|---|
| Aquarium guide | 250–400 litres |
| Maximum pump flow | 1,400 L/h |
| Filter volume | 13 litres |
| Media baskets | 3 |
| UV clarifier | Integrated 9 W lamp with independent switch |
External aquarium filter for 250 to 400 litre tanks, with 13 litres canister volume, a maximum 1,400 L/h pump flow and an integrated 9 W UV clarifier.
£172.89 (inc VAT)
Aqua One Ocellaris 1400UV External Aquarium Filter uses a pressurised external canister to circulate aquarium water through removable media baskets. Aqua One gives this model an aquarium-size guide of 250–400 litres and a maximum pump flow of 1,400 L/h.
An external filter for your aquarium
The Ocellaris 1400UV combines an external media chamber with an independently controlled UV clarifier in one canister filter.
An intake carries water out to the canister and a return sends it back to the aquarium. Foam and wool collect suspended material, while the porous biological media provides surface area for beneficial bacteria once the filter matures. The filter supports, but does not replace, water testing, sensible stocking and regular water changes.
Which Ocellaris should I choose?
The 1400UV has the same 250–400-litre aquarium guide and 13-litre filter volume shown for the standard 1400. Its distinguishing feature is the built-in UV clarifier; the standard 1400 has no UV lamp.
The aquarium capacity is a manufacturer guide. Stocking, feeding, fish species and planted layouts change the demands on a filter. A tank near the top of the guide may need a different setup from a lightly stocked aquarium of the same size.
Understanding the flow rating
The 1,400 L/h figure is the manufacturer’s maximum rating, not a promise of the flow at your aquarium. Lift height, hose length, bends, fittings and media condition all affect installed circulation. Arrange the inlet and return to move water through the aquarium without directing too strong a current at fish.
Filter media and included fittings
Aqua One lists three media baskets with black and blue foams, a wool pad, sintered-glass noodles and sintered-glass substrate for this model. The media provides mechanical and biological filtration; replacement pads and other media are separate maintenance purchases.
Water enters through the inlet and intake strainer and returns through either the spray bar or directional duckbill outlet. Connect the intake to IN and the return to OUT, using the supplied pipework and locking tap connector. Follow the instructions for assembling the fittings and secure the hose connections by hand where directed; do not force mismatched components together.
Integrated UV clarification
The 1400UV includes a 9 W ultraviolet lamp and a separate UV switch. Water passing the enclosed UV chamber is exposed to the lamp, which can help control free-floating algae. It acts on water passing through the unit and does not replace the filter media or routine aquarium care. The 9 W figure is the UV lamp rating, rather than the filter’s combined power consumption.
Disconnect the filter from the power supply before opening or servicing the UV section. Never look at a lit UV lamp or override a safety interlock; follow the supplied directions for cleaning the quartz sleeve and replacing the correct lamp.
Installation and first start
Before first use, remove the disposable plastic packaging from the media, put it back in the correct baskets and rinse the baskets and new media in tap water to remove loose dust. Stack the baskets flat and refit the media cover before closing the filter; follow the media layout in the supplied instructions.
Place the canister in a suitable stable position outside the aquarium, with enough room to reach the clips, taps and media baskets. Route hoses without tight kinks, secure the aquarium inlet and return, and make a drip loop on electrical cables.
Fill the aquarium before priming. Secure the tap connector with its locking lever and put the flow valve in the open position. Pull the primer up and push it down until water flows through the intake and begins filling the canister. Allow the intake and canister to fill completely and water to reach the return before switching on. Check the fittings and seals for leaks once it is running, and never leave the pump running dry.
Routine maintenance
Switch off and unplug the equipment before servicing it. Close the valves and release the tap connector as described in the instructions, keeping a towel or shallow tray nearby for residual water.
Rinse established biological media and sponges gently in water removed from the aquarium to protect their beneficial bacteria. Keep the cleaning area free from soaps and detergents. Clean the inlet, return and hoses when deposits restrict flow, and inspect the impeller and its chamber during servicing. Check the head seal before reassembly; use an aquarium-safe seal lubricant where the instructions call for it. Refit the media baskets in their proper order, secure the head and tap connector, then prime and check for leaks when restarting. Replace worn media, seals or mechanical parts with the correct reference for this model.
Replacement media and service parts
For Ocellaris 1400/1400UV maintenance, the listed replacement references are 25139I (impeller), 25139W (wool pads), 25139S (15 ppi sponge pads) and 25140S (35 ppi sponge pads). Replacement parts and media are separate purchases. Match the filter’s model label and full part reference when ordering.
For future servicing, select the 1400 / 1400UVC option in our Aqua One 139W replacement wool pads (2 pack). This optional maintenance pack is sold separately from the filter; check the model label before ordering.
At a glance
| Feature | Details |
|---|---|
| Manufacturer | Aqua One |
| Model | Ocellaris 1400UV |
| Product type | External canister filter |
| Aquarium guide | 250–400 litres |
| Maximum pump flow | 1,400 L/h |
| Filter volume | 13 litres |
| Maximum head height | 1.5 m |
| Media baskets | 3 |
| Media | Black and blue foams, wool, sintered-glass noodles and substrate |
| Primer | Integrated manual primer |
| Quick-release taps | Yes |
| UV clarifier | Integrated 9 W lamp with independent switch |
| Manufacturer article | 94153 |
| Water types | Coldwater, tropical and marine |
Frequently asked questions
What size aquarium is the 1400UV for?
Aqua One lists 250–400 litres as its guide. Fish load, feeding and tank layout also matter, so choose for the whole setup rather than tank volume alone.
Does the 1400UV include filter media?
These models include wool, sponges and sintered-glass filter media. Arrange the media in the three baskets according to the supplied filter’s layout.
Will it deliver 1,400 L/h once installed?
That is the maximum pump rating. The actual return flow depends on lift height, hose runs, fittings and how clean the media is.
How do I clean the canister?
Unplug it, close the taps and disconnect the connector as instructed. Rinse established biological media and foam gently in water removed from the aquarium, clean the pipework as needed, reassemble and prime before restarting.
What does the UV clarifier do?
The 9 W UV stage treats water passing through the enclosed chamber and can help control free-floating algae. It is not a substitute for filter care or water changes. Disconnect power before maintenance and never look at a lit UV lamp.
Browse aquarium external filters or read Aqua One’s Ocellaris range information.




Reviews
There are no reviews yet.