Aqua One Ocellaris 1400 External Aquarium Filter

SKU: A94146
GTIN: 9325136130201
Brand

Aquarium guide

250–400 litres

Maximum pump flow

1,400 L/h

Filter volume

13 litres

Media baskets

3

UV clarifier

Not included on this standard model

External aquarium filter for 250 to 400 litre tanks, with 13 litres canister volume and a maximum 1,400 L/h pump flow.

£134.73 (inc VAT)

Aqua One Ocellaris 1400 External Aquarium Filter uses a pressurised external canister to circulate aquarium water through removable media baskets. Aqua One gives this model an aquarium-size guide of 250–400 litres and a maximum pump flow of 1,400 L/h.

An external filter for your aquarium

The standard Ocellaris 1400 places a generous media chamber outside the display, giving larger aquariums space for staged mechanical and biological filtration.

An intake carries water out to the canister and a return sends it back to the aquarium. Foam and wool collect suspended material, while the porous biological media provides surface area for beneficial bacteria once the filter matures. The filter supports, but does not replace, water testing, sensible stocking and regular water changes.

Which Ocellaris should I choose?

The standard 1400 is a larger step up from the 850: Aqua One lists a 13-litre filter volume and a 250–400-litre aquarium guide. Choose this model for conventional canister filtration; the separately identified 1400UV adds an integrated UV clarifier.

The aquarium capacity is a manufacturer guide. Stocking, feeding, fish species and planted layouts change the demands on a filter. A tank near the top of the guide may need a different setup from a lightly stocked aquarium of the same size.

Understanding the flow rating

The 1,400 L/h figure is the manufacturer’s maximum rating, not a promise of the flow at your aquarium. Lift height, hose length, bends, fittings and media condition all affect installed circulation. Arrange the inlet and return to move water through the aquarium without directing too strong a current at fish.

Filter media and included fittings

Aqua One lists three media baskets with black and blue foams, a wool pad, sintered-glass noodles and sintered-glass substrate for this model. The media provides mechanical and biological filtration; replacement pads and other media are separate maintenance purchases.

Water enters through the inlet and intake strainer and returns through either the spray bar or directional duckbill outlet. Connect the intake to IN and the return to OUT, using the supplied pipework and locking tap connector. Follow the instructions for assembling the fittings and secure the hose connections by hand where directed; do not force mismatched components together.

Standard non-UV model

This 1400 is the standard filter without an integrated UV clarifier. If a built-in ultraviolet stage is important, choose the separately listed 1400UV rather than assuming the standard canister contains a lamp.

Installation and first start

Before first use, remove the disposable plastic packaging from the media, put it back in the correct baskets and rinse the baskets and new media in tap water to remove loose dust. Stack the baskets flat and refit the media cover before closing the filter; follow the media layout in the supplied instructions.

Place the canister in a suitable stable position outside the aquarium, with enough room to reach the clips, taps and media baskets. Route hoses without tight kinks, secure the aquarium inlet and return, and make a drip loop on electrical cables.

Fill the aquarium before priming. Secure the tap connector with its locking lever and put the flow valve in the open position. Pull the primer up and push it down until water flows through the intake and begins filling the canister. Allow the intake and canister to fill completely and water to reach the return before switching on. Check the fittings and seals for leaks once it is running, and never leave the pump running dry.

Routine maintenance

Switch off and unplug the equipment before servicing it. Close the valves and release the tap connector as described in the instructions, keeping a towel or shallow tray nearby for residual water.

Rinse established biological media and sponges gently in water removed from the aquarium to protect their beneficial bacteria. Keep the cleaning area free from soaps and detergents. Clean the inlet, return and hoses when deposits restrict flow, and inspect the impeller and its chamber during servicing. Check the head seal before reassembly; use an aquarium-safe seal lubricant where the instructions call for it. Refit the media baskets in their proper order, secure the head and tap connector, then prime and check for leaks when restarting. Replace worn media, seals or mechanical parts with the correct reference for this model.

Replacement media and service parts

For Ocellaris 1400/1400UV maintenance, the listed replacement references are 25139I (impeller), 25139W (wool pads), 25139S (15 ppi sponge pads) and 25140S (35 ppi sponge pads). Replacement parts and media are separate purchases. Match the filter’s model label and full part reference when ordering.

For future servicing, select the 1400 / 1400UVC option in our Aqua One 139W replacement wool pads (2 pack). This optional maintenance pack is sold separately from the filter; check the model label before ordering.

At a glance

Feature Details
Manufacturer Aqua One
Model Ocellaris 1400
Product type External canister filter
Aquarium guide 250–400 litres
Maximum pump flow 1,400 L/h
Filter volume 13 litres
Maximum head height 1.5 m
Media baskets 3
Media Black and blue foams, wool, sintered-glass noodles and substrate
Primer Integrated manual primer
Quick-release taps Yes
UV clarifier Not included on this standard model
Manufacturer article 94146
Water types Coldwater, tropical and marine

Frequently asked questions

What size aquarium is the 1400 for?

Aqua One lists 250–400 litres as its guide. Fish load, feeding and tank layout also matter, so choose for the whole setup rather than tank volume alone.

Does the 1400 include filter media?

These models include wool, sponges and sintered-glass filter media. Arrange the media in the three baskets according to the supplied filter’s layout.

Will it deliver 1,400 L/h once installed?

That is the maximum pump rating. The actual return flow depends on lift height, hose runs, fittings and how clean the media is.

How do I clean the canister?

Unplug it, close the taps and disconnect the connector as instructed. Rinse established biological media and foam gently in water removed from the aquarium, clean the pipework as needed, reassemble and prime before restarting.

Does this 1400 have UV?

No. This standard Ocellaris 1400 is a non-UV canister; check the exact model when comparing it with a UV-equipped version.

Browse aquarium external filters or read Aqua One’s Ocellaris range information.

Aqua One Ocellaris 1400 External Aquarium Filter Reviews

Reviews

There are no reviews yet.

Be the first to review “Aqua One Ocellaris 1400 External Aquarium Filter”