Brand

AquaForte Impermax: Surface Preparation and Coating-System Checks

AquaForte Impermax is a liquid polyurethane waterproofing system for suitably prepared pond and water-feature surfaces. Choose it for the substrate and application conditions, not the pond’s water volume. Read the current technical sheet before ordering the coating, primer or other preparation materials, and allow for the full preparation and curing process.

Start with the substrate

The base must be structurally sound and suitable for the coating system. Check surface condition and moisture limits, the primer required, and the treatment of joints, cracks, corners and penetrations. Waterproofing cannot repair an unsound structure.

Follow the complete coating specification

Check the required coating build, suitable application and curing temperatures, and the time and conditions needed before filling. A coating, primer and solvent are different products with different roles; use only the combinations and preparation method stated for the exact system.

Grey and black coating pack sizes and supporting preparation products are listed separately. Work out the quantity from the area and the technical sheet’s application rate, rather than guessing from pond capacity or selecting the smallest pack.

Compare other pond paints and coatings where you are still deciding which lining method suits the surface.