Sicce Green Reset 100 Replacement 20W UVC Lamp
| Brand | |
|---|---|
| Supplier SKU | FS2061 |
| Supplier Availability | In stock |
| Lamp Wattage | 20W |
| Compatible Model | Green Reset 100 |
Genuine-type 20W replacement UV-C lamp for the Sicce Green Reset 100. Match the filter model and old lamp before ordering, and inspect the quartz sleeve and seals during replacement.
£38.76 (inc VAT)
Sicce Green Reset 100 Replacement 20W UVC Lamp
This 20W replacement UV-C lamp is listed for the Sicce Green Reset 100. It is the lamp only, intended to restore the ultraviolet output of a compatible Green Reset pressure filter after the service interval.
A UV lamp can continue to glow after its useful UV-C output has declined. Replacing it on the manufacturer’s schedule and cleaning the quartz sleeve at the same time is more reliable than waiting for green water to return.
Compatibility and service points
- Specified for Green Reset 100
- Lamp rating: 20W
- Match the old lamp, filter model and supplier SKU before ordering
- Inspect the quartz sleeve and seals while the unit is open
- Never operate or view an exposed UV-C lamp
Verified product information
| Compatible filter | Green Reset 100 |
|---|---|
| Lamp rating | 20W |
| Product type | Replacement UV-C lamp |
| Supplier SKU | FS2061 |
Replacing the lamp safely
Disconnect the pump and UV from the mains and allow the unit to cool. Follow the Sicce sequence for removing the electrical head, support the quartz sleeve without twisting it and keep water away from every electrical contact.
Clean limescale from the quartz sleeve with a suitable non-abrasive method, replace damaged seals and reassemble evenly. Fill and check the filter for leaks before reconnecting the electrical supply.
Our practical view: The cheapest lamp is not a saving if it is the wrong length, pin arrangement or ballast rating. We recommend matching the exact Green Reset model and the marking on the old lamp before the filter is dismantled.
Frequently asked questions
Will this fit any pressure filter?
No. It is model-specific; check the Green Reset model and lamp marking.
Why replace a lamp that still glows?
Visible light does not prove that useful UV-C output remains at the required level.
Should I replace the quartz sleeve too?
Only if it is damaged or cannot be cleaned, but always inspect it and its seals.
Can I test the lamp outside the filter?
Do not view an exposed operating UV-C lamp. Follow the manufacturer’s safe test procedure.
What if green water remains?
Check lamp age, sleeve cleanliness, flow rate, pump turnover and the mechanical filter rather than assuming the new lamp is faulty.
Complete or compare the system
These are the closest products or service items to compare:
Useful sections: Sicce Green Reset filters.
Reviews
There are no reviews yet.