Pond Glass Viewing Windows
Premium pond glass viewing windows made to order in the UK, designed for strength, clarity and long term durability. Manufactured using laminated, toughened and heat soaked glass, these panels are suitable for koi ponds, water features and natural swimming ponds. Available in a range of thicknesses to suit different depths and spans, with typical delivery in 2 to 3 weeks.
Price range: £295.00 through £850.00 (inc VAT) m2
Made-to-Measure Pond Glass Viewing Windows
Toughened, Laminated and Heat-Soaked Glass for Koi Ponds, Water Features and Natural Swimming Ponds
Important ordering information: Every panel is made to order in the UK. Select the glass thickness, enter the finished glass width and height in millimetres, and the calculator will work out the price. A £200 minimum order charge applies to delivered glass orders. Typical delivery is 2 to 3 weeks.
A pond viewing window completely changes the way you experience a pond. Instead of only seeing fish from above, you can watch them move and feed below the waterline while the glass gives a raised koi pond, swimming pond or contemporary water feature a clean architectural finish.
Our pond glass is manufactured for demanding aquatic installations using laminated, toughened and heat-soaked safety glass. Panels are available in 21.5mm, 25.5mm, 33mm, 39mm and 44.5mm thicknesses, so you can order a compact garden-pond window or a much wider open-top infinity-style panel to suit the build.
How to Order Your Pond Window
- Select the glass thickness. Use the guide below or ask us to check the specification.
- Enter the finished width and height. Measurements must be entered in millimetres and should be the required glass size, not the structural opening.
- Review the calculated area and price. The calculator uses the selected price per square metre and applies the £200 minimum order charge where necessary.
- Check access and offloading arrangements. Pond glass is heavy, made to order and delivered curbside.
For more design, installation and delivery guidance, visit our pond viewing windows guide and FAQs.
Choosing the Correct Pond Glass Thickness
Glass thickness is influenced by the water depth at the window, the panel width and the way the surrounding structure supports the glass. The following sizes are a practical general guide for the options available on this page.
| Glass thickness | General guide to window height / water depth | General guide to panel width |
|---|---|---|
| 21.5mm | Up to 400mm | Up to 1600mm |
| 25.5mm | Up to 600mm | Up to 2000mm |
| 33mm | Up to 1000mm | Around 2000mm |
| 39mm | Up to 1000mm | Up to 3000mm |
| 44.5mm | Up to 1200mm | Up to 3500mm |
Unsure which thickness to order? Please contact us before purchasing. For unusually wide panels, deeper water or non-standard structures, the specification should be checked for the individual installation.
Built for Strength, Clarity and Long-Term Reliability
- Made to measure for the finished dimensions you provide
- Laminated and toughened safety-glass construction
- Heat soaked to reduce the risk of spontaneous breakage
- Polished edges and neatly finished safety corners
- Suitable for raised koi ponds, natural swimming ponds and architectural water features
- Available for rebate installations and open-top infinity-style pond windows
Lamination helps the layers remain bonded in the unlikely event of damage, while the polished finish creates a clear and professional viewing area when correctly installed.
Preparing the Opening and Installing the Glass
We recommend allowing approximately 10mm around the relevant sealed edges for a continuous sealant bead. A correctly constructed rebate provides support, helps distribute pressure and produces a neat, flush finish. The surrounding blockwork, concrete, fibreglass or frame must be stable and properly prepared before the panel is installed.
Larger and deeper windows should be fitted by an experienced installer. If you need help with the wider build, see our professional koi pond building service.
How Much Silicone Is Needed for an Infinity-Style Pond Window?
Open-top infinity-style pond windows are normally sealed along the bottom edge and both vertical side edges. The top remains open, so it is not included in the silicone calculation.
As a practical guide, a 50mm rebate may use approximately one tube of silicone for every 200mm of sealed glass edge.
- A 1600mm wide Ă— 600mm high open-top window has 2800mm of sealed edge: 1600mm along the bottom, plus two 600mm sides.
- At approximately one tube per 200mm, allow up to 14 tubes.
Usage varies with bead size, rebate depth, surface flatness and installation method. It is sensible to have additional sealant available rather than risk stopping part-way through the installation.
Recommended Pond-Safe Sealants
- AquaForte Superstrong Fix & Seal – a high-strength MS polymer adhesive and waterproof sealant for pond windows, frames and fittings.
- Gold Label Underwater Pond Sealer – a fish-safe option that can be used below the waterline and in wet conditions.
- Silver Label Aquarium Silicone – traditional fish-safe silicone for suitable glass and aquarium-style applications.
- PondPal Underwater Pond Sealer – useful for strong pond repairs and sealing in live pond environments.
Browse all compatible products in our pond glues and sealants category.
Delivery and Offloading Requirements
Please do not book installation work until the glass has been safely delivered and inspected.
- Typical delivery is 2 to 3 weeks, although busy periods can take longer.
- Delivery is curbside only and the glass is supplied without packaging to avoid pressure points and trapped moisture.
- Deliveries normally take place between 07:30 and 17:30 and require a signature.
- The driver will normally contact you approximately one hour before arrival.
- Allow at least two capable people for every 85kg of glass. The driver may not be able to help with offloading.
- Ensure the delivery vehicle can gain safe access. Failed delivery caused by restricted access or insufficient help may incur a redelivery charge.
Areas Subject to an Additional Delivery Charge
Additional delivery charges apply to the following postcode areas: AB, BT, CT, DD, DG, EH, FK, G, IV, KA, KW, KY, ML, PA, PH, PL, TD, TN23–TN30 and TR.
Important Checks Before Placing Your Order
- All panels are made to order and cannot be returned once manufactured.
- Check every measurement carefully before ordering.
- Confirm that the selected thickness is suitable for the water depth, width and structure.
- Plan safe access, lifting assistance and a secure location for inspection on delivery.
- A £200 minimum order charge applies to delivered glass orders. This is passed on from the glass processor and delivery network rather than added as a separate That Pond Guy fee.
Need Help Choosing the Right Glass?
We would much rather check a dimension or specification before the panel is manufactured than have you discover a problem on installation day. If you are unsure about the glass thickness, finished size, rebate or delivery arrangements, contact us and we will help you work through it.



Reviews
There are no reviews yet.