Oase PondEdge Ground Spikes – Standard & XL

SKU: OASE-PONDEDGE-SPIKES
Brand

Model

Standard 380mm – Pack of 10, XL 580mm – Pack of 10

Guarantee

2 Years

Pack Quantity

10 spikes

Oase PondEdge Ground Spikes in packs of ten. Choose Standard 38 cm or XL 58 cm supports to secure your flexible pond rim. Both lengths fit the 14 cm and 19 cm PondEdge strips.

  • Standard 380 mm or XL 580 mm length
  • Ten grey spikes per pack
  • Solid recycled material that does not rot
  • Oase recommends approximately 50 cm support spacing

Add the matching PondEdge 25 metre edging roll, sold separately.

Price range: £50.19 through £85.99 (inc VAT)

PondEdge edging and spike calculator

Enter the length around your pond or border. Work out a starting quantity, then choose the edging or ground spikes you need.

125 metre edging rolls

50individual supports

5packs of 10 spikes

This uses Oase’s approximate 50 cm support spacing. An open run includes a support at both ends. Add any extra supports needed for curves, joins or ground conditions, and enter your own edging allowance. This is a planning guide rather than guaranteed coverage.

Both spike lengths fit either edging height. Each button adds that selected product separately; you can review the quantities in your basket.

The interactive calculation needs JavaScript. The quantity tables below explain the same method, and you can choose products using the normal shop controls.

Oase PondEdge ground spikes to support your pond edging

Oase PondEdge Ground Spikes anchor the flexible rim strip around a pond or garden border. Choose Standard 38 cm or XL 58 cm spikes, supplied in packs of ten. Both options are grey and made from solid recycled material that does not rot.

These are the supports for the system. Add the matching Oase PondEdge Flexible Pond Edging in 14 cm or 19 cm heights to form the continuous rim. Both edging heights are supplied as 25 metre rolls and fit either spike length.

Compare Standard and XL PondEdge spikes
Specification Standard XL
Oase product code 57753 57754
Spike length 380 mm / 38 cm 580 mm / 58 cm
Quantity per pack 10 spikes 10 spikes
Compatible edging 14 cm and 19 cm PondEdge 14 cm and 19 cm PondEdge
Colour Grey Grey
Material 100% recycled, non-rotting material 100% recycled, non-rotting material

PondEdge in our own pond build

The supports are easiest to see while the edging is being fitted. These photographs from our work at Thames View Crematorium show the flexible strip following the pond outline on upright spikes, followed by the liner installation and the new pond after filling and edge finishing. See the full Thames View Crematorium pond construction project to follow the work from edging to the finished pond.

Excavated pond area before the flexible edging and liner were installed
Before: the excavated pond area before the edging and liner were fitted.
Curved flexible pond edging supported by upright ground spikes around the excavated pond
During: the flexible strip follows the pond outline, supported by ground spikes.
Black pond liner laid across the prepared curved pond shape during construction
During: the liner is laid across the prepared pond shape before the edge is finished.
Filled pond with planting and a curved stone border at Thames View Crematorium
After filling and edge finishing: the new pond with planting and a curved stone border.

Select a photograph to see the full view.

Standard or XL: which ground spike should I choose?

Standard spikes are 38 cm long; XL spikes add another 20 cm of length. Plan how much of each support will sit alongside the edging and how much will anchor into the ground. The right choice depends on the edge detail and the firmness of the substrate, rather than the edging height alone.

A longer spike offers more length to work with when additional ground engagement is needed, but length alone does not make loose ground stable. Check the support in the actual location before fixing the entire rim. Oase describes the solid spikes as resistant to twisting and suitable for installation in firm ground.

How many packs of PondEdge spikes do I need?

Oase recommends supports at approximately 50 cm intervals. For a closed pond perimeter, divide the measured length in metres by 0.5 to get a starting spike count, then divide by ten and round up to whole packs.

Starting quantities for a closed pond perimeter
Perimeter Spikes at 50 cm spacing Packs of 10
5 metres 10 1
10 metres 20 2
15 metres 30 3
20 metres 40 4
25 metres 50 5

Allow for the actual layout. The table assumes a closed perimeter with evenly spaced supports. Ends, joins, curves and ground conditions may need extra spikes. It is a planning guide, not guaranteed coverage from a pack.

Worked example: an open 10 metre border

Ten metres contains twenty 50 cm spaces. With a support at both ends, that gives 21 spikes before extras, so you would need three packs of ten. A closed 10 metre loop has no separate end point and starts at twenty supports. This is why the shape of the run matters when ordering.

Using the spikes with PondEdge edging

  1. Mark the line and level. Set out the perimeter and intended rim height before driving the supports.
  2. Fit supports along the outline. Start with Oase's approximate 50 cm spacing, checking that each support is secure at the required height.
  3. Secure the edging. Shape the PondEdge rim strip, cut it where necessary and screw or bolt it to the spikes as shown by Oase.
  4. Recheck the complete rim. Look for movement or low points before laying and finishing the liner. Keep sharp edges and projecting fixings away from the liner.

The supports hold the edging in place; the liner and finished edge detail provide the water-retaining boundary. Keeping the rim level and maintaining a capillary break between pond water and surrounding soil are separate parts of getting that detail right.

Common questions about PondEdge ground spikes

Will XL spikes fit the 14 cm edging?

Yes. Oase lists both Standard and XL spikes with both the 14 cm and 19 cm PondEdge strips. You can choose the support length independently of the strip height.

Are the flexible edging rolls included?

No. This page is for packs of ten ground spikes. Order your PondEdge flexible edging roll separately and check the quantities for the whole perimeter.

Can the spikes be used for garden borders?

Yes, with the matching PondEdge strip. Oase also lists the system for lawn edges, planting beds and terrace boundaries.

Is one pack enough for a 25 metre edging roll?

No. At approximately 50 cm spacing, a closed 25 metre perimeter starts at fifty supports, or five packs. Add any extra supports required by the installation rather than spreading one pack over the full roll.

Can I mix Standard and XL spikes?

Yes. Both lengths fit the PondEdge strips, so they can be used along the same perimeter where support needs vary. Keep the complete rim consistently supported and level.

Manufacturer references: Oase Standard spike specifications and Oase XL spike specifications.

Products related to the Oase PondEdge Ground Spikes – Standard & XL

Oase PondEdge Ground Spikes – Standard & XL Reviews

Reviews

There are no reviews yet.

Be the first to review “Oase PondEdge Ground Spikes – Standard & XL”