Oase PondEdge Flexible Pond Edging – 25m Rolls

SKU: OASE-PONDEDGE-EDGING
Brand

Model

14cm × 25m, 19cm × 25m

Guarantee

2 Years

Roll Length

25m

Material

Recycled plastic

Oase PondEdge flexible pond edging in 25 metre rolls. Choose 14 cm or 19 cm height to suit your planned pond rim. The grey strip follows curves and is made from recycled material that does not rot.

  • 25 metre roll, cut to suit your outline
  • 14 cm or 19 cm height; both 7 mm thick
  • Supports a level perimeter and capillary barrier detail
  • Also suitable for garden borders

Complete the system with matching PondEdge ground spikes, sold separately.

Price range: £189.00 through £229.99 (inc VAT)

PondEdge edging and spike calculator

Enter the length around your pond or border. Work out a starting quantity, then choose the edging or ground spikes you need.

125 metre edging rolls

50individual supports

5packs of 10 spikes

This uses Oase’s approximate 50 cm support spacing. An open run includes a support at both ends. Add any extra supports needed for curves, joins or ground conditions, and enter your own edging allowance. This is a planning guide rather than guaranteed coverage.

Both spike lengths fit either edging height. Each button adds that selected product separately; you can review the quantities in your basket.

The interactive calculation needs JavaScript. The quantity tables below explain the same method, and you can choose products using the normal shop controls.

Oase PondEdge flexible pond edging for a level pond rim

Oase PondEdge gives a liner pond a clearly defined perimeter while allowing you to follow curves, sweeping shapes or a more formal outline. Choose a 25 metre roll in either 14 cm or 19 cm height and cut it to suit your layout. The grey edging is made from recycled material that does not rot.

The edging forms the rim; matching supports hold that rim in position. Use it with Oase PondEdge Ground Spikes in Standard or XL packs to build the complete system. Edging rolls and spike packs are sold separately.

Compare the two PondEdge edging rolls
Specification 14 cm edging 19 cm edging
Oase product code 57751 57752
Roll length 25 metres 25 metres
Edging height 140 mm 190 mm
Material thickness 7 mm 7 mm
Colour Grey Grey
Material 100% recycled, non-rotting material 100% recycled, non-rotting material

PondEdge in our own pond build

At Thames View Crematorium, we used the edging and matching supports to establish a level, curved rim before fitting the underlay and liner. These photographs show the prepared ground, the edging fixed to its supports, the liner installation and the new pond after filling and edge finishing. See the full Thames View Crematorium pond construction project.

Excavated pond area before the flexible edging and liner were installed
Before: the excavated pond area before the edging and liner were fitted.
Curved flexible pond edging supported by upright ground spikes around the excavated pond
During: the flexible strip follows the pond outline, supported by ground spikes.
Black pond liner laid across the prepared curved pond shape during construction
During: the liner is laid across the prepared pond shape before the edge is finished.
Filled pond with planting and a curved stone border at Thames View Crematorium
After filling and edge finishing: the new pond with planting and a curved stone border.

Select a photograph to see the full view.

Choosing between 14 cm and 19 cm edging

Both options provide the same 25 metre length and 7 mm material thickness. The difference is the height of the strip, so choose around the planned edge detail and surrounding ground levels. The taller 19 cm strip gives you another 5 cm of height to work with; it does not make the pond itself deeper.

Decide where the finished waterline, garden surface and any decorative finish will sit before choosing. Both heights work with either Standard or XL PondEdge spikes. Spike length is a separate decision about the support needed in your ground.

Why a level edge and capillary break matter

A low point around the rim can let water escape before the rest of the pond reaches the intended level. Soil or turf touching pond water can also draw moisture out through capillary action. A carefully levelled PondEdge rim helps you form a controlled boundary between the pond and the garden.

The edging supports the perimeter detail; the pond liner still provides the watertight layer. Keep soil and turf from bridging that detail, and protect the liner where it passes over the edge. Oase recommends underlay beneath the liner, including protection around the capillary barrier area.

Planning and fitting the PondEdge system

  1. Measure the actual outline. Follow every curve with a flexible tape or string, rather than estimating from the pond's length and width. Include the edging joins in your plan.
  2. Set the finished level. Mark a consistent rim height around the perimeter and check it with a suitable level before fitting the strip.
  3. Position the supports. Oase's starting guidance is approximately 50 cm between spikes. Plan additional support where the layout or ground needs it.
  4. Shape, cut and secure the rim. Oase shows the edging cut with a saw and screwed or bolted to the ground spikes. Check the level again as you work around the outline.
  5. Complete the liner detail. Protect the liner from cut edges and exposed fixings, then finish the border so the intended capillary break remains intact.

How many ground spikes will a 25 metre roll need?

For a closed 25 metre perimeter, 50 cm spacing works out at approximately 50 spikes, or five packs of ten. This is a starting calculation, not an allowance for every site. An open run needs a support at each end, and joins, tighter curves or uneven ground can increase the quantity.

For the spike sizes and a worked open-run example, see our PondEdge ground spike selection and quantity guide. Ordering both parts together makes it easier to check the complete layout before installation.

Other uses around the garden

PondEdge can also define a lawn edge, planting bed or terrace boundary. Its flexible format is useful where the border needs to follow a continuous shape. For a pond, keep the waterline and liner detail at the centre of the design; for a garden border, plan around the intended surface levels.

Common questions about PondEdge edging

Are ground spikes included with the roll?

No. Choose the edging roll here and order the matching PondEdge ground spikes separately in the quantity your layout needs.

Can I cut the edging for a smaller pond?

Yes. Oase shows the strip being cut to size with a saw. Measure and mark the cut, then check the finished edge before it comes into contact with the liner.

Does 19 cm edging require XL spikes?

No fixed pairing is required. Both spike lengths are listed for both edging heights. Choose the support length to suit the installation and ground conditions.

Browse our wider pond-building supplies for liner, underlay, adhesives, pipework and finishing materials.

Manufacturer references: Oase 14 cm PondEdge specifications and Oase 19 cm PondEdge specifications.

Products related to the Oase PondEdge Flexible Pond Edging – 25m Rolls

Oase PondEdge Flexible Pond Edging – 25m Rolls Reviews

Reviews

There are no reviews yet.

Be the first to review “Oase PondEdge Flexible Pond Edging – 25m Rolls”